HT1766 My computer froze during the restoration process. It didn't work and now it won't let me restore and the passcode still shows up. What do I do?

I forgot my iPod passcode. I've done the "back up ipod" and restore.
My computer froze in the last 13 seconds and shut off and turned back on.
I tried redoing the whole process, but it won't let me do it.
The passcode is still there and I don't know what to do.

If screen-lock passcode
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen        
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • My 5s died and needed recharging. now it won't let me in without a passcode which i didn't use or don't remember.I can't restore from backup since find my phone was activated. Any ideas ?

    Anyone help ?

    Use a computer and log into your iCloud account and turn off Find My iPhone on your iPhone. Then Restore it in iTunes.

  • I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

    I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

    without more information, I assume you mean a blackout from sleep issue.
    Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
    AND ...
    unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
    test it and check back

  • My 4th gen ipod won't backup after it froze during a software update to 4.3.5. I had to cancel the backup at the start of the update and now it won't let me backup to my computer, freezes during backup or says my backup is corrupted.

    I pressed 'X' during a backup after it froze during an update to software 4.3.5 and now it won't let me backup on my computer. Does anyone have any ideas? It either freezes during backup or says my 'backup is corrupted' or 'I cannot backup on my computer'. I have had to abort quite a few attempted backups since the initial problem, which I think has made it worse. I have already tried restoring my ipod, deleting the aborted backup from my preferences/devices in itunes and deleting it from my user/appdata/etc on my PC hard drive. Any ideas what to try next?

    After hours of frustration I eventually decided to restore. I lost my apps, but i didn't have many and was able to reinstall them for free. During the restore it updated my ipod to the latest software 4.3.5, which i think may have caused the initial problem, but the backup issue remains. Sometimes it stops me from syncing and other times it allows me to skip the backup, but still says that i can't backup on my computer. I'm worried that it has done something to my computer as it took me six hours to do a Bullguard scan, which only normally takes about an hour. The scan didn't come up with any viruses, but it stalled at system32 for ages. The only other thing that i can think of is that a demo CD I uploaded may have caused a problem. iTunes couldn't find a track listing for it but gave me a few different options. i thought I had to choose one to continue, so did that then changed the track details to the correct tracks. I'm now worried that may have introduced an issue or caused a glitch in iTunes. How paranoid am I sounding?  

  • Computer froze during restore....

    Computer froze during restore now ipad is not recognized on itunes. Ipad screen says connected but not on itunes list. Tried the troubleshoot steps with firewall disabling/reinstalling itunes. Windows PC.

    Typically the next step would probably be to try recovery mode to restore the device again. This article explains how to to that.
    iPad: Unable to update or restore.
    From the article.....
    Summary
    You may encounter the following symptoms while updating or restoring your iPad:
    iPad continually restarts but never displays the Home screen.
    An update or restore did not complete and the iPad is no longer recognized in iTunes.

  • My computer froze during match initial formatting.  Now some songs are uploaded others are "greyed out."  If I go song by song, I can update match.  How can I do this all at once and also update album art?

    My computer froze during match initial formatting.  Now some songs are uploaded others are "greyed out."  If I go song by song, I can update match.  How can I do this all at once and also update album art?

    Hi gdogk,
    If there was an interruption during the initial iTunes Match process and you are now having issues with playback and album art, you may find the troubleshooting steps outlined in the following article helpful. In particular, you may want to turning iTunes Match off, then back on again, as noted here:
    If iTunes Match is already enabled on your computer or device, try turning iTunes Match off and then on again.
    Mac: While holding down the option key, choose Store > Turn Off iTunes Match.
    Turn iTunes Match on by selecting Store > Turn On iTunes Match.
    Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
    Turn iTunes Match on by selecting Store > Turn On iTunes Match.
    How to troubleshoot iTunes Match - Apple Support
    Regards,
    - Brenden

  • I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

    i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

    Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • I put a passcode on my iPad 2, then I forgot it. I've tried to restore it in iTunes, but it still has the passcode on it. What do I do?

    I put a passcode on my iPad 2, then I forgot it. I've tried to restore it in iTunes, but it still has the passcode on it. What do I do?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present
    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.

  • Bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it, it didn't work and he won't take back the ipod what do i do?

    I bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it by connecting it to my computer and pressing the home and sleep buttons at the same time, it didn't work and he won't take back the ipod what do i do?
    When I try connecting it to my computer itunes opens and says I cannot connect to the ipod because it is disabled, enter passcode on ipod. The ipod is locked and disabled and will not allow me to try and put in a passcode, which I wouldn't be able to do because I have no idea what it might have been.
    I downloaded the newest version of Itunes, restarted computer, connected ipod, nothing, held every button down for what seems like forever, nothing. I think I have been screwed by the pawnshop. Is there anyway of restoring this thing or is now just a $60.00 paperweight?

    torreto44. that does not work with a Disabled iPod. Jim's gave the correct answer for a Disabled iPod
    torreto44 wrote:
    Hey man don't worry bout it ! Hold the power button and the circle button for a long time and it should reboot meaning the iPod will restart and u can set it up as yours with new apple i.d and password

  • I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?

    I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?

    It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.

  • I had to have my computer fixed and had to reinstall my itunes and now it won't let me burn or put any of my songthat i have emported off my cd's.  only the songs i have bought from iturnes.  can anyone help with this problem.

    i had to have my computer fixed and had to reinstall my iturnes and now it won't let me burn or put any of my music that i had imported.  the only thing i have found is to delete them and reimport does anyone have any ideas how to fix this without delete my whole library i have over 10000 songs and this will take me days.
    thanks
    sammijane

    Why will it not let you add them?  What specifically are you trying to do, please provide steps.
    Frankly, the only thing that should need to be done it restore the iTunes folder from the backup onto the computer.  There is no reason to add or import anything.

  • Was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the

    I was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the edges started to turn black, forming a ring which got larger till about 4 hours later, the screen turned completely black. I tried connecting to iTunes but it wasn't detecting the phone and I can't do anything with it now... When it turned completely black, I charged it and after a while, the low batt screen came on but it was fuzzy and flickering with the white ring... What to do know ???????

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • My Aperture 2.1 has gone into a continual thumbnail mode.  I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails.  I tried reloading Aperture 2.1, but that did not change anything.  I have also turned the syst

    My Aperture 2.1 has gone into a continual thumbnail mode.  I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails.  I tried reloading Aperture 2.1, but that did not change anything.  I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode.  I can view my stored pictures, even modify them, but it still says thumbnails.
       I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner.  I had saved the scan to my  desktop before I tried to import it.
    Please Help, Maurice A Bird at  [email protected]
    Thanks

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • HT2688 My daughter has used my computer to log into iTunes and download music but now it won't let me download recently purchased music from my iPad onto my computer. I want to transfer the recently purchased songs onto my iPod so how can I do this now.

    My daughter has used my computer to log into iTunes and download music but now it won't let me download recently purchased music from my iPad onto my computer. I want to transfer the recently purchased songs onto my iPod so how can I do this now? iTunes now says that I have to wait another 55 days! There must be a way to do this since I have paid for them.

    In iTunes sign out of your daughters Apple ID and sign in with your own.

Maybe you are looking for

  • What's wrong with my simple syntax?

    Hi, Im trying to create a var and then check it with an if statment but its not working, whats going wrong? var loggedin:String = new String(); loggedin = ("yes"); if (loggedin == "yes") searchbox1.text = ("user logged in");

  • Panasonic TV models compatible with Freetalk Confe...

    Hi all, Can someone provide me the list of Panasonic TV compatible models for Freetalk Conference HD camera? I am interested in TX-L*E30 (TV LED). Any experience with this particular model? Thanks Kuba

  • CONVERTIR REPORTE CR

    Good afternoon, This time I write to you aksing for your help with the following problem. I have a report in CR2008, which with I made a cash receipt with the B1 tables ORCT, RCT1 ETC .. Now I want to take that same report but changing it to the tabl

  • How to change the constraints?

    I add a JPanel to a JFrame using: this.getContentPane().add(jPanel2, new GridBagConstraints(0, 1, GridBagConstraints.REMAINDER, 1, 1.0, 1.0 ,GridBagConstraints.NORTHWEST, GridBagConstraints.BOTH, new Insets(110, 10, 10, 10), 0, 0)); Is it possible to

  • Poor Performance of Web Version..

    Oracle says, Using a 3-tier architecture for your application improves the performance. Reason: Middle tier takes all burden of data fetching, storing & serving. But I've noticed that this is not true. When we are working on Desktop version its fast,