HT1766 my daughters iphone is disabled and i can not get it to work or sync without the password and its locked

she really never used the icloud on her phone so i do not know what to do

You will need to try to restore your iPhone from the same computer that you most recently synced to.
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully.

Similar Messages

  • My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    My apple Id has been disabled. I have relogged on changed password and still can not get it to work on my Iphone

    Contact itunes support.  Click Contact Us at the bottom of this page.

  • The air port on my imac went off and i can not get it to work

    my air port on the imac weny off and i can not get it to work now

    Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
    If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
    See http://support.apple.com/kb/ht1509
    The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
    Give details and we can figure it out.
    Here is discussion about the same thing as I think has happened to your imac in macbook.
    https://discussions.apple.com/thread/5219345?tstart=30

  • I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

    I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

    Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
    They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

  • Printer went offline after a print was interrupted and I can not get it to work again.

    Printer had been set up and was working but a paper interruption stopped it and I can not get it to print or remove the offline setting

    That will probably be because its their licence and will be registered to them..??
    You won't be able to open CC files in CS2, that is to many versions back.

  • I am using Hover for my email address and I can not get it to work properly

    I've changed the MX record to 10mx.hover.com.cust.hostedemail.com (Hover's recomendation) but it's still not working.
    How Can I get this to work properly?
    Thanks for the help!

    Hey KoobeP,
    I have performed a DNS look-up on the domain stormbluedesign.com and can see that the MX record you have added exists within our DNS: http://screencastmb.worldsecuresystems.com/img/2013-04-24_0949.png. However, this MX record is not pointing to any IP address which leads me to believe the MX record you added is incorrect.
    I believe the MX record you need to add is mx.hover.com.cust.hostedemail.com, with a priority of 10. Not 10mx.hover.com.cust.hostedemail.com. But as always, contact your mail service provider for confirmation on the records they require you to add.

  • IPhone 4 quit vibrating n can not get it to work with ibrate

    Can any one help me my iPhone 4 quit vibrating n I can't get to work

    Hey Little poignant,
    Thanks for the question. I understand that your iPhone 4 is no longer vibrating, let's double check the settings to make sure everything is configured properly.
    Settings > Sounds > Vibrate on Ring (Make sure this is ON)
    Settings > Sounds > Vibrate on Silent (Make sure this is ON)
    Settings > Sounds > Ringtone > Vibration (Make sure this is not set to "None")
    If the above settings are configured properly, we'll need to isolate this issue further. I recommend restoring your iPhone as outlined in this article:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • I just bought an ipod for my daughter for christmas and we can not get it to work it wants to log on to the internet and when I type my password it won't except it  what do I do?

    I just bought my daughter an ipod for christmas and it won't let her do anything until she logs onto the internet and when we type the password in the ipod will not except it what can I do so she can use her christmas present

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset network settings: Settings>General>Reset>Reset Network settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • HT2101 my ipad shut down and I can not get bit back on. It is fully charged and so is the keyboard. Help

    My Ipad shut down and it will not open. It is fully charged and so is the keyboard.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Hi, just bought an Idjay system and I can't get it to work with any of the following: I tried iphone 4s but it has IOS7 so the phone is not recognising when I am plugging the system in I have tried ITouchs,phones

    I have bought a Idjay system and I have the App on the 4S phone however the phone is not aknowledging the system. After googling we found that their is an issue with IOS7 for this system. So we tried an Itouch, its on IOS6 but doesnt work. Then tried an Ipad but the first version. Thought we had success when the Ipad seen the system connect to it. However I then went to download the App onto the Ipad but it needs IOS6 onwards and as its the first model of the Ipad the latest version is 5.1.1 so I cant download the App...
    Any suggestions? do you know how to get the 4S phone to work with it as that would be the ideal scenario?
    Thanks in advance

    They said that there shouldn't be any reason for it not to work. I bought it off ebay and the previous owner used it on the same devices that I am

  • I have a iphone5 and i can not get itunes to work

    I Have an iphone 5. when i syc it to my pc, it goes through the steps until it gets to step 4. then it either says "cancelling sync" or "waiting for change to be applied" and it stays like this all the time. i have also lost soem music

    i have also updated iTunes and it has made no difference

  • G5 Tower, replaced hard drive and now can not get it to work- HELP

    My G5 (tower) crashed hard & after a trip to the Genius Bar at my local Mac Store I found out the hard drive was dieing.
    The Mac person fixed some problem files & told that I could replace the hard drive. I bought a 350 GB SATA 3.5in hard drive and placed it in the second slot in the tower. I then used time machine & backed up the hard drive to the second slot (after I backed up on an external hard drive- just to be safe).
    I removed the hard drives & placed the new one in the A slot. When I turned on the computer I had the ? folder. I turned off & restarted holding the option key and got two folders, one with a turn back arrow & a rt facing arrow. Clicked either did nothing. Does any1 know what I am doing wrong?? If so please let me know. Much appreciated.

    Did you reset your PRAM?
    command-option- p-r
    Hold down all four keys as the mac starts up and wait for the chimes to ring twice. Then let the machine start up as usual.
    If it works be sure to check your date and time settings (the system will tell you)
    You can also start up from your system disk holding down the c key as it starts-- go past the language screen and open disk utilities from the menu bar run disk repair and then repair permissions. Set your startup disk to your new drive.
    Hopefully that will take care of the problem.

  • I have a macbook (10.6.8) and I can not get facetime to work, anyone else having this problem?

    I have a macbook (year 2009) operating system 10.6.8... I can not get facetime (formerly called ichat...) to work? Anyone else having this problem/ know how to fix it?
    Thanks

    Update to FT 1.0.5 i had the same problem until i updated

  • I can not get into safari, i have re set my password and it still wont let me on

    i was able to get to safari then it asked me for id, i emailed myself the id it still wont let me onto safari?

    The general instructions here should work, if you choose the Gmail account type:
    http://support.apple.com/kb/ht1385
    However, make sure you're using the entire email address as your "username." Simply using the first part is not sufficient.
    If you still can't get in, I'd recommend contacting your sys admin, or Google support.

  • I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me

    I have signed up for adobe conversion to microsoft word and I can not get it to work -  can you help me?

    Hi Mike,
    I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
    I apologize for the inconvenience.
    Best,
    Sara

Maybe you are looking for

  • Hyper-V Gen 2 Windows Server 2012 R2 VM cannot define static IP address

    Hi, I have setup a physical server with Windows Server 2012 R2. It has only the Hyper-V role installed. The physical server has two NICs that I have teamed with Hyper-V port as the load balancer. I have created 1 VM on this Hyper-V server that is a G

  • Getting files from laptop to iPad for email

    I have been stuck trying to find a solution for this problem. I have a desktop, laptop and iPad2. My iPad generally syncs with the desktop (which has my photos, complete iTunes library, etc.). I regularly travel to a location that has no internet acc

  • Problu00E8me calling sendmail under windows

    Hello, <br> when i use send mail from OS it works but when i create RFC and i call it from it, it gives me time out error with the bellow trace file content :<br><br> Trace file opened at 20100127 015854 Romance Standar, REL 46D,0,2257, VER 3 MT-SL<b

  • Finding Accounts Automatically Posted to by Configuration

    Is there a way to find out which GL accounts are automatically being posted by configuration?  Specifically I am looking for how to determine the vendor and cash discount accounts that are flagged in config and any other similar sort of accounts.

  • Image Viewer not showing images

    I have image viewer working successfully on several other sites but I can not get it to work from this one. I am trying to get a auto looping image show of 4 images. I tried this initially with 4 images and nothing showed. I deleted the Image Viewer