HT1766 my iphone is disaled and it says i have to connect to itunes how do i do that
my iphone is disabled how can i get it back up
You will need to use the cable that came with it to plug it into the USB port of a computer running a current version of iTunes.
http://support.apple.com/kb/HT1414
Similar Messages
-
my iphone 5s is Off now and it cant on and it say you have to connect to itunes and when i connect to itunes it say you have to restore your phone and when i restore it say Error your phone cant update... what am i doing now?
idont know my acount my owner iforgot my apple id tuning of my find my phone
-
I Have forgotten my passcode and I have connected it to iTunes to factory reset but will not reset it please help
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
I tried changing my password, and it changed to one that wasnt it, and i dont know it. So i tried it too many times and now its saying it is disabled, connect to itunes. but a problem is that my power button on top is broken. how to i fix it?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Locked my ipod and it says ipod is disabled connect to itunes - have tried everyting - can not rememb er password - can someone please type good instructions for me to get back in - thank
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My 7 year old daughter has an iPod Touch 4 and she used the wrong password too many times. She thinks she remembers her password now but we have already exceeded the attempts and it says "iPod is disabled" connect to iTunes. Is there any way we can get the device to allow another attempt? We are traveling this week so don't have access to the serial number or the computer that was used to originally set up her iTouch. I don't even know what operating system it's on and can only see the home screen.
Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766 -
how can i get into my locked iPod? as i have forgoten my passcode and is says "iPod is disabled connect to iTunes"
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?
Reset your modem.
-
HT1056 I bought my iphone on Ebay and it doesn't have iphoto on it. How can I get it?
I bought my iphone on Ebay and it doesn't have iphoto on it. How can I get it?
You buy it on the App Store. It doesn't come with an iPhone.
-
How do I get back into my ipod witout reseting it? It says I have to connect to itunes becuase its disabled.
Restore. Note that it could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this. -
hi,
i forgot my passcode for my iphone and it told me to connect to itunes. how would i do that?IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Please Get the iPhone User Manual for iOS 5 -
my ipad has a passcode but i forgot it and i tried many times and it says "Ipad is disabled connect to itunes" so i did that and it pops up and says "you must enter your passcode to access this itunes account"
THave you looked at this link http://support.apple.com/kb/HT1212
-
Downloaded Update to iOS6 via wifi, now it says I have to connect to iTunes. Why?
I downloaded the update to iOS6 via wifi, now it says I have to connect to iTunes. Why? From all of the articles and blogs I have read it should have updated without a hitch.
Anyone else have this problem?I'm not trying to be a smart A**. Is this a case of "misery loves company"? Will it make you feel better if someone else had issues? Do what you want to do.
Sometimes things happen when you update software. That is why you are always supposed to backup. Others have had issues - just look around. -
this is the second time i have forgotten my passcode to my ipod touch, the first time i had no problem with resetting everything, it worked fine, this time it says ipod is disabled connect to itunes, so i plug it into my laptop and i sit there staring at the side bar on itunes till it comes up with my ipod, but it doesn't, when i do this on another computer it lets me restore it, but then it stops halfway and said cannot do this since ipod is locked with a passcode, please enter the passcode and try again, but if i cant get into it how can i put in my passcode? is there any way that i can find out my passcode, or any other way i can reset my ipod
its an ipod touch 4th generationOptions for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/ -
My ipod touch was stolen and i got it back.on the screen saver it now says,"ipod is disabled,connect to itunes" what do i have to do to get my ipod touch working again?
http://support.apple.com/kb/HT1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
Daily Report for e-mail alerts sent to via subscription
Hi All, Good Day!!!, We have multiple subscription in SCOM 2012 SP1. we need to generate a daily report stating that this many Alert sent to this subscriber group and this many are closed . Ex: We have [email protected] is the subscriber and for this
-
How to Enable the Preview of PDF Files in 64-bit Windows 7
If you are running the 64-bit version of Windows 7 (or Vista), you will find that your PDF files do not preview in Windows Explorer as they do in the 32-bit versions. Instead, all you see is a message stating that This file can't be previewed. To ena
-
Error while executing the Job:Cannot assign NULL to host variable 1
Hello! I have the following issue: Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details) Note 1362138 -
-
How to read Archive data??
Hi, I am developing a program which requires me to retrive the <b>archive</b> data of table BSAK and then fill it into an itam then output the list. I use T-code 'SARA' to find the object name is 'FI_DOCUMNT'. There u can find that BSAK is contained
-
One of two logins won't log-in. Blue screen only on the login we use. The other works. Verify disk comes up with this: Verifying volume "Macintosh HD" Performing live verification. Checking Journaled HFS Plus volume. Checking Extents Overflow file. C