HT1766 New phone - need help with installation

I had an iphone 4s and now have a new iphone 4s. I'm trying to use my backup from icloud however it says IOS 7.1 is required and I don't know how to get past it??

You need to go through two distinct steps:
1. Update your new iPhone to iOS 7.1. Go to Settings > General > Software Update to do this.
2. Restore your old iPhone's backup. On your new iPhone, do Settings > General > Reset > Erase All Content and Settings. You will be invited to restore the backup as part of the setup process.

Similar Messages

Need help with installation

I recently received a laptop from school to access my online classes. When I tried to use Adobe Reader I received the following message: Adobe Reader 9.1 has encountered a problem and needs to close. Sorry for the inconvenience. I tried tech support at school and was told to uninstall and reinstall the program. During the installation process I received the following error: Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school. Can some one please help me.

Hello again, Michael,
Was unable to do the UAC changes. Buttons where not highlighted. I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works. Thanks for all your help Michael you have made my online school experience better.
Sincerely,
Sherri Lee
Date: Mon, 13 Jul 2009 11:03:52 -0600
From: [email protected]
To: [email protected]
Subject: Need help with installation
Hello again, Sherri:
It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
1. Open Control Panel
2. Under User Account and Family settings, click on the "Add or remove user account"
3. Click on any user account
4. Under the user account click on the "Go to the main User Account page" link.
5. Under "Make changes to your user account", click on the "Change security settings" link
6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
7. You will be prompted to reboot your computer - do so when ready
You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
http://www.foxitsoftware.com/pdf/reader/
FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
Best of success in your pursuit of knowledge!
Michael
>

Urgent: im new and need help with this task!

I need help with converting the pseudo code to java code, Any help will b greatly appreciated!
// Declare a variable of type int, called "choice".
// Generate a random number between 0 inclusive and 7
// exclusive, and store that number into the variable
// "choice". (How do you generate a random number? Use the
// nextInt(int) method inside the random object, which takes
// a single int parameter. You can read about this method
// here:
// http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html
// If "choice" is equal to 0, then create and return a new
// IBlock object, passing "game" as the parameter to IBlock's
// constructor.
// Otherwise, if "choice" is equal to 1, then create and
// return a new TBlock object, passing "game" as the
// parameter.
// Otherwise, if "choice" is equal to 2, then create and
// return a new OBlock object, passing "game" as the
// parameter.
// Otherwise, .... etc ....
// (please continue to do this for all of the 7 kinds of block
// that can be created)

import java.util.*;
public class Echo{
     public static void main(String[] args)     {
          //System.out.println("enter ur choice");
Random r=new Random();
int choice=r.nextInt(6);
     switch(choice)
     case 0:
          IBlock object0=new IBlock("games");
          break;
     case 1:
          TBlock object1=new TBlock("games");
          break;
     case 2:
          OBlock object2=new OBlock("games");
          break;
     case 3:
          LBlock object3=new LBlock("games");
          break;
     case 4:
          JBlock object4=new JBlock("games");
          break;
     case 5:
          SBlock object5=new SBlock("games");
          break;
     case 6:
          ZBlock object6=new ZBlock("games");
          break;
class TBlock
     TBlock(String s)
          System.out.print("TBlock called"+"\n value passed is "+s);
class IBlock
     IBlock(String s)
          System.out.print("IBlock called"+"\n value passed is "+s);
class JBlock
     JBlock(String s)
          System.out.print("JBlock called"+"\n value passed is "+s);
class OBlock
     OBlock(String s)
          System.out.print("OBlock called"+"\n value passed is "+s);
class LBlock
     LBlock(String s)
          System.out.print("LBlock called"+"\n value passed is "+s);
class SBlock
     SBlock(String s)
          System.out.print("SBlock called"+"\n value passed is "+s);
class ZBlock
     ZBlock(String s)
          System.out.print("ZBlock called"+"\n value passed is "+s);
}

Getting a new phone - need help transitioning

I had my Palm Pre Plus for Verizon for just over a month when the phone overheated and became non-functional. The Verizon store was unable to restore the phone to operational status and I am being shipped a new Palm Pre Plus.
Anyway, before the phone became totally disabled, I connected the device to my computer via USB and backed up all of the internal directories and files contained on the Pre Plus. Question: Am I able to restore all of the text messages, attachments, and photographs to the new phone? I am not worried about the email, contacts, and calendar since these were synchronized with my Google account and am assuming I can do the same with the new phone.
It looks as though much of this information is store in the directories I backed up.
Thank you.
Post relates to: Pre Plus p101vzw (Verizon)

Hello and welcome to the forums;
Text messages, call logs, ringtone preferences, etc. are not backed up in the Profile, and are not stored on the USB portion of the drive. Pictures, mp3s, movies, and documents are stored in the USB drive, and those will be recovered.
As for attachments saved from emails, it depends on what type of attachment as to whether or not the file will be in the part of the USB drive you can access.
Hope this helps,
TreoAide

New laptop need help with itunes.

okay so i got a new laptop for xmas and i want to transfer my songs from my old desktop to my laptop. is there a way i can load my ipod onto my laptop and use that to transfer songs.
my friend said that when i plug in my ipod to my blank itunes it will erase my songs. is there a way to download my songs to my laptop from my ipod?
i really need help!
THanks for the help.
xo kaiit
windows dell Windows XP

Your friend is right. the iPod cannot be used to update iTunes. I had the same problem about a year ago, and I just transferred each song using my jumpdrive. It's painstakingly boring, but it will work without wiping anything clean.

New to Oracle- Need help with installation from cmd shell.

Hello!
I am writing a script to automate the installation of Oracle Forms and Reports 6i in XP through cmd.exe. The script works great, but the command is incomplete.
Currently the command in the script is "setup -responseFile directory\response.rsp".
This is supposed to generate a .rsp file containing all the options I selected in the custom installation (so I can simply call that file in future implementations of this script to automatically get all those settings), but it does not.
Does any one know what might be wrong: why isn't this generating the response file?
Or, do you know the arguments for the command so that I don't even need a response file?
I've googled this about a dozen times and found nothing very helpful.
Any advice is appreciated.
P.S. I've also tried -record -destinationFile. No luck with that either.
Message was edited by:
user582111

Madrid,
I had already tried that with no success. Just to be sure, I tried it again a moment ago exactly as you have it written except for the location name ("setup.exe -record -destinationFile \\directory\response.rsp"). Again, I don't see a response file.
I have viewed the link you sent me as well. Unfortunately, it looks like a I need to use the Universal Installer? I don't see anything like that in my installation directory. Am I completely missing something? Oracle is a whole new bag for me.

New user: Need help with my phone. iSync on a G3 with OSX 10.3.9

Hi guys, this is my first post on this forum, so take it easy on me. LOL I just got a Sony Ericsson W810. I found out that I need to get iSync. Aparently iSync 2.2 is the program I need. Is this available for my version of OSX? I'm not sure if a new version of OSX is compatible with my G3. Any help? Much appreciated. Thanks.

Welcome to Apple Discusssion.
iSync 1.5 is the version which shipped with and works with Mac OS X releases prior to 10.4 - iSync 2 and later packages are not compatible with Mac OS X 10.3.9 or any release of the OS. With Mac OS X 10.4 and iSync 2, came a completely new synchronization technology: the Sync Services framework.
You can find out what, if any, options exist for SONY Ericsson users here, at Julian Wright's excellent site:
http://mobile.feisar.com

New user needs help with HD choices

I just found this forum and it looks like something I am going to enjoy. I have Premiere Pro CS 5.0 and use it to process AVCHD video. My hardware is made up of Asus P9X79 Pro, i7 3930k, 16 GB memory, and GTX 470 vid card. I also have an SSD as my main boot drive - it is an OCZ Revodrive.
I would like help in setting up my hard drives for the Adobe software, so have listed my storage drives along with current usage and ATTO benchmark results:
Drive 0 - Revodrive - ATTO = 800 - Used for Win 7 -64 Pro and Adobe software
Drive 1 - WD Black 2TB - ATTO = 140 - Used for MTS file storage
Drive 2 - WD Black 2TB - ATTO = 140 - Used for Scratch Files
Drive 3 - Samsung 1TB - ATTO = 60 - Used for Finished files (Encore files and for saving MP4 files for web upload)
Drive 4 - WD Black 1TB - ATTO = 120 - Used for backup
Drive 5&6 - 2 each Hitachi 750GB in Raid - ATTO = 180 - Used for backup (Drives are attached to Marvel Raid port on Motherboard)
I realize that drive #3 is the slowest drive and should probably be used for other things. I am open to suggestions.

Happy New Year and wecome to the forum!
Sounds like a strong system, and it should be just fine for AVCHD video.
Suggest:
Boot / OS / programs - Revodrive is fine; you can also assign media cache and media cache DB (CS5 setting) to this drive
Data drive - create a RAID 0 array from your current drives 1 and 2 - use this for projects and media, and pretty much whatever other data needs you have for your PC
scratch / output drive - use for current matching 5 & 6 Hitachi's in RAID 0 for scratc and render outputs
all others - use 3 & 4 for backups
You should probably run PPBM5 and report the 4 "scores" to the PPBM5 site and also back here to get a reality check that everything is configured and working properly for your system.
Jim

New user - need help with PC Suite use

Hello. I have a new Nokia 6233, and have installed the current version of PC Suite (6.84.10.4), but can't figure out how to make certain things work that seem like they should. I'm using Windows XP with Service Pack2, and am connecting my phone with my PC via Bluetooth.
1) I have installed an application using the Install Applications component of PC Suite, and it now shows that the new app is on the phone -- but how do I actually get it from showing up in that category on PC suite to the actual phone?
2) I have hundreds of phone numbers that migrated over poorly from my old Sony Ericsson via SIM, and would like to edit them on the PC instead of on the phone. However, I see nothing under Contacts in PC Suite. How do I get the PC to recognise the contacts on the phone? If I enter new ones on the PC, how do I get them to the actual phone?
Thanks in advance if you can help!
//Albie

Hi,
1) Do you mean that you can not find installed application from phone (or what)?
2) Try to update Contacts folder -> open Nokia Phone Browser > "phone name" > Contacts > and press F5 button.
Contacts folder includes also button for create a new contact and when you click "Save", it saves that in phone.
BTW: if you contacts are in SIM card -> you have to copy those first in phone memory.

Desperately need help with installation

Right, so I bought the student pack for the Creative Suite5 Design Premium.
The first of my problems came when I was trying to install acrobat 9. The problem was that halfway through verification, the setup wizard said that Windows Installer needed to be closed for it to finish verifying, which is really confusing because it was Windows Installer running the installation i nthe first place.
So I tried installing the Design Premium suite itself, I was informed that the minimum requirements were not met for a number of products. I deselected the ones I did not need until I was left with adobe photoshop cs5 and adobe indesign cs5. Both of these did not meet system requirements, even though I did a check on this website itself for the requirements. I found that I actually exceeded the minimum requirement needed so I still don't understand why the installation won't work.
I am an art student doing digital painting so I would really appreciate swift help. This is a really frustrating issue.
Thanks.

Could you please post your machine configuration, OS, RAM, Processor details and resolution on which you are installing. Please post PDApp.log file from C:\Users\<User>\AppData\Local\Temp\PDApp.log
and ignore all the warning messages and try installing. These are just kind of warnings and does not stop installation, if any application does not support the environment, that particular application will have trouble working with.
Thanks,
Tahseen

New ipod need help with songs from old one NEED HELP!!!!

I got a new ipod nano 3rd gen. but it wont let me take all of my old songs from my old ipod(nano 1st gen) and put them on my new one! I dont want to lose my songs so PLEASE HELP!!

When I did that on my old ipod and it said doing so will delete all the songs on it and replace it with my library. When I did it on my new ipod it just put the songs that was already in that playlist back on the ipod, not the songs that i need from the old one.

Need Help With Installling Classic on OS X Panther??

Hi: When I installed OS X Panther, I wasn't aware that in order to run Classic 9, I needed 9.2. Well, I purchased 9.2 but everytime I install it it's giving me an error message. I've checked the disk as well as my HD and everything seems to be fine. I've turned off screensaver, unplugged my printer and disconnected the cable to the internet. What's up? It still won't install. It keeps saying there were errors in installing. Can anyone help me out here. I'd sure appreciate it.
G4 AGP Sawtooth Mac OS X (10.3.9)

Hi flyingcat,
reinstalling OS 9 is not always an easy task. See if any of these article s can help:
Using Apple Software Restore to install or reinstall parts without erasing (Mac OS X 10.1.5 or earlier)
Using Restore Discs with Mac OS X 10.2 through 10.3.3
Mac OS X 10.4: Restoring applications from a Mac OS X 10.2 Software Restore disc
Using Restore discs with computers that ship with Mac OS X 10.3.4 through 10.3.7
Using Restore discs with computers that ship with Mac OS X 10.3.7 or later
Mac OS X: Reinstalling Mac OS 9 or recovering from a software restore
Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs
If this answered your question please consider granting some stars: Why reward points?

Cleaning up my new Thinkpad need help with what to Uninstall

So I finally got my new thinkpad T520 set up with Windows 7 and I currently have all the prepackaged Lenovo Programs and thinkvantage tools installed. I am trying to optimize my system right now and I am wondering which programs I should keep and which I should delete.
I already have Revo uninstaller, CCleaner, and ESET NOD32 smart security antivirus so I already have some good utilities to clean my system.
Basically if anyone could help me determine which lenovo programs to keep and which to uninstall I would be very greatful. I dont need this computer to be a screamer, but I would like a stable computer that is as fast as possible.
Thanks

from your list, i don't use the following:
Screen reading optimizer
Simple tap
Solution Center
AutoLock
Communications utility
truthfully, Lenovo's factory load is lighter than most every other OEM load i've worked with.
if you want to further optimize your machine's running state, you should have a look at the blackviper site to dig through your running Windows services. even if you choose not to modify anything, it's quite educational. http://www.blackviper.com/
you can also go through your system's start-up programs and what-not. apps like acrobat reader install update checkers that load at every boot and run in the background. i like a Microsoft tool named Autoruns for this task. it's part of the Sysinternals suite. http://technet.microsoft.com/en-US/sysinternals
hth.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

New and need help with replace harddrive M45-s265

Hello,
I am not sure were to post this had a hard time trying to find were to post this message.
(I also upgraded to 2g memory with out a problem)
I replaced the board and get a message as if it has none
part of message
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE ROM
The new board is from newegg and is a western digital wd scorpio ATA 250 gb wd2500beve-00wzto, I was told this is what i needed.
The key in and pins are the same as old board.
Thank you so much for any help I can get

That's the correct drive. What is your question? To do the replacement, you flip the unit over, remove the hard drive cover, slip the drive out, remove the 'caddy' and put it on the new drive, slide the new drive back in, replace the cover and boot from your recovery disks to restore the original disk image.

I am really new and need help with internet

Hi. I am really excited about the new MACS and want one really bad. First, I need to know what I would need to get for wireless internet. Next, are Macs compatible for Internet like MSN?
iBookG4 Windows XP I want to get an iBookG4

I have a PowerBook G4 17 with a gig of ram that I absolutely couldn't live without. I use a Verizon aircard for internet access, and it's proven to be about 90% as fast as a high speed cable connection. I routinely send pics up to 3M in size with no problem. The only thing I have found that it really doesn't do very well is downloading software. And the Verizon card is really affordable--I have an unlimited plan that doesn't hurt each month at all. Hope this helps.

HT1766 New phone - need help with installation

Similar Messages

Maybe you are looking for