HT1766 Once backed up how do I put the photos into my photo file on my computer?

Cannot find where all my backed up photos are. And cannot figure out how to just pull photos from my phone onto my computer. Am I just that bad with technology or is there something I'm missing?!! Help!!!

After my iCloud became full I backed up my photos and I have been searching online for a while for an answer to this question. Here's what I did
On my Windows 7 computer that has iTunes and that I configured to use with the iCloud I went to my pictures and my photo stream and you can use shift click or control click to select multiple, or drag around them, or use keystroke..control a ... To select all, Then push the delete key on the keyboard and it will automatically sync that with the iCloud. Make sure you back up everything first somewhere else, because it will delete from all devices.
I hope this helps!

Similar Messages

TS1463 how do you put the ipod into disk mode

how do you put the ipod into disk mode

iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod nano (6th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Volume Down buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod devices with a Click Wheel
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
Older iPod models without a Click Wheel
Before placing the iPod into Disk Mode, verify that it has a charge.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
source: Putting iPod into Disk Mode

How Do I put Album Art into my music files for Zen V Pl

I have a Zen V Plus and don't know how to put album art on songs that are already on the player...
Please Help MeMessage Edited by kmn755 on 2-03-200706:47 PM

You have to append the artwork to the actual music files themselves. What I do is search Amazon.com for the album that the songs are off of, click the artwork so it expands and then right click the larger artwork and COPY.
Then in iTunes go into "get info" on the song, and paste the artwork in the artwork tab. This will append it to the file. Yeah yeah i know it isn't technically legal to "copy" the artwork but I honestly don't give a rat's a$$ about doing it and neither should you.
(...cue finger-waving "shame on you, you're breaking the law" post...)
Then once you transfer this song you put the artwork on to your nano, it should show up there when you play the song. At least this works for me on my 30GB iPod video.

How do I put the music on my ipod onto a new computer?

I read the thing on how to put the music on my ipod onto my new computer and it says you need the old computer which I don't have because it died.
What else can I do?

itune blocks this function, you must utilize other tools to achieve that. There're couple of tools for transferring the files between ipod and computer depends on your demands, e.g transfer only songs/videos, transfer photos etc. You can have a look at this review site, hope it useful.

How can I put the signature into the data file.

Hi all,
I want to put the signature into the data file, mean the data file will be on the top and the signature will be at the buttom.how can i do that?
Thanks.
example:-
dataFile.txt
Name=...
Address=...
Signature=6A07C70E....123FEAB(Hex)

Thanks for your reply.
First, i have a keypair (public key and private key).
I use the private key to initialize the Signature and
use the Signature to sign a data file ( dataFile.txt) .
So when i need to comfirm the data file not being modify
I have to verify the data file with the Signature and the public key.
I hardcoded the public key in my program so my client (receiver of data)
need only the Signature file and the data file (2 files).
So how can i combine the Signature file and the data file into 1 file?

Hi. I made a modern resume from the pages template and then made a modern letter from the templates, how do I combine the two into one PDF file in Pages? Thank you.

Hi. I made a resume from the modern template in Pages, then I made a letter from the modern template in Pages. How do I combine the two (cover letter and resume) into one PDF file. Thanks in advance.

Open them both in Preview.app and drag the thumbnail of one into the other,
Peter

How do i put the row into the target rowset

hi am trying to add new row to another table,by selecting taking values from one table to another,i have below code but its not adding vlues,how can i Creates and initializes a new Row object, and insert it into the Row Set.
my code is
    public void updAddMember(ActionEvent actionEvent) {
        // Add event code here...
        //Code to get the bindings for TargetVO :
        OIDOperations   oIDOperations= new OIDOperations();
        Map<Object,String> mp=new HashMap<Object, String>();
                DCBindingContainer bindings2 =
                   (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
               JUCtrlHierBinding obj = (JUCtrlHierBinding)bindings2.findCtrlBinding("UserDetailsViewVO1");
               ViewObject targetVO = obj.getViewObject();
          DCBindingContainer bindings =
                   (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
               DCIteratorBinding empIter =
                   bindings.findIteratorBinding("DeltMember1Iterator");
        //SourceVO1Iterator is the iterator under Executables section for the SourceVO1 bindings.
        RowSetIterator roleRSIters = empIter.getRowSetIterator();
        RowSetIterator rs1 = roleRSIters.getRowSet().getViewObject().createRowSetIterator(null);
        rs1.first();
               NameValuePairs nvp = null;
               String username = null;
        while (rs1.hasNext()) {
                           Row r = rs1.next();
                   nvp = new NameValuePairs();
                   nvp.setAttribute("Organisationid", getorgid());
                   System.out.println("printedorgid" +getorgid());
                   nvp.setAttribute("Username",r.getAttribute("Username"));
                    nvp.setAttribute("Username1",r.getAttribute("Username"));
                   nvp.setAttribute("Firstname",r.getAttribute("Firstname"));
                   nvp.setAttribute("Surname",r.getAttribute("Surname"));
                   nvp.setAttribute("Emailaddress",r.getAttribute("Emailaddress"));
                   targetVO.createAndInitRow(nvp);
               rs1.closeRowSetIterator();
               targetVO.getApplicationModule().getTransaction().commit();
    }Edited by: adf009 on 2013/02/14 10:20 AM
Edited by: adf009 on 2013/02/14 3:32 PM

Thanks BalusC,
I awarded you the points in my other forum...
http://forums.sun.com/thread.jspa?threadID=5376871
If a managed bean is declared with request scope in the configuration file with the help of <managed-bean-scope> tag then the life-time of this bean instance is valid only for the current request. Any attempts to make a reference to the bean instance after the request end will throw in Illegal Argument Exception by the server. To avoid these kinds of Exception, component <a4j:keepAlive> is used to maintain the state of the whole bean object among subsequent request.
Example:
<a4j:keepAlive beanName = "#{myClass.testBean}"/>
The "beanName" attribute defines the request scope bean name you'd like to re-use. Note that this attribute must point to a legal JSF EL expression which resolves to a managed mean instance. For example for the above code the class definition may look like this one:
=====================================================
I still have this issue from the last forum...
nohacks wrote:
Do you have and example of this type of filter?
Just implement javax.servlet.Filter. The coding is fairly straightforward. Just add the desired headers to the HttpServletResponse and map the filter on an url-pattern covering the images.
Why are the images obtained from a separate request? Is that a JSF thing?
Certainly not. Did you check the generated response? It's all plain vanilla HTML.

How can I get the exact pathname for a file on my computer?

I need to enter a command in Terminal that contains the pathname of an application. I know what the path is but Terminal does not recognize it. How do I make sure the pathname is in the correct form?

Enter the command up to the point of entering the file path and add a space, then drag the file into the terminal window. It will fill out the path.
If you need to go further into the contents of the Application package, you can continue with /Contents...
Another way is to start typing and then hit Tab to auto-complete. It will stop where it can't determine the next letter.
So, type /App tab and it will fill in /Applications. Type a / and start with the name of the app, then tab and it should complete. Continue till you have the correct path.
Spaces will be replaced with \<space>, so, App Store would end up as /Applications/App\ Store.app

When i bought my new iMac recently i transferred all my photos from pc to iPhotos then i recd an update that gave me Photos how do i combine the two into one photo library and which should i choose?

When i recently bought my new iMac, i transferred my photos from the old pc. then i recd an update which introduced the Photos...so now i have two photo repositories and i only want one. how do i get them together and how can i easily find duplicates to delete? and which library should i choose.

When you launch Photos for the first time it will import all of your photos from iPhoto. iPhoto is going away eventually and Photos is the replacement. For the time being both apps will remain on your system but you should start using Photos exclusively for the future.

How to put the data into cache and distribute to nodeusing oracle coherence

Hi Friends,
i am having some random number data writing into file,from that file i am reading the data and i want to put into cache,how can i put the data into cache and partition this data into different nodes ( machines) to caluculate like S.D,variance..etc..like that.(or how can i implement montecarlo using oracle coherence) if any one know plz suggest me with flow.
Thank you.
regards
chandra

Hi robert,
i have some bulk data in some arraylist or object format,i want to put into cache.
i am not able to put into cache.i am using put method like cache.put(object key ,object value) ,but its not allowing to put into cache.
can you please help me.i m sending my code.plz go thru and tel me whr i did mistake.
package lab3;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.NamedCache;
import com.tangosol.net.cache.NearCache;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintWriter;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
import java.util.Scanner;
import javax.naming.Name;
public class BlockScoleData {
     * @param args
     * s=The spot market price
     * x=the exercise price of the option
     * v=instantaneous standard deviation of s
     * r=risk free instantaneous rate of interest
     * t= time to expiration of the option
     * n – Number of MC simulations.
     private static String outputFile = "D:/cache1/sampledata2.txt";
private static String inputFile = "D:/cache1/sampledata2.txt";
NearCache cache;
List<Credit> creditList = new ArrayList<Credit>();
     public void writeToFile(int noofsamples) {
          Random rnd = new Random();
          PrintWriter writer = null;
          try {
               writer = new PrintWriter(outputFile);
               for (int i = 1; i <= noofsamples; i++) {
                    double s = rnd.nextInt(200) * rnd.nextDouble();
                    //double x = rnd.nextInt(250) * rnd.nextDouble();
                    int t = rnd.nextInt(5);
                    double v = rnd.nextDouble() ;
                    double r = rnd.nextDouble() / 10;
                    //int n = rnd.nextInt(90000);
                    writer.println(s + " " + t + " " + v + " "
                              + r );
          } catch (FileNotFoundException e) {
               e.printStackTrace();
          } finally {
               writer.close();
               writer = null;
public List<Credit> readFromFile() {
Scanner scanner = null;
Credit credit = null;
// List<Credit> creditList = new ArrayList<Credit>();
try {
scanner = new Scanner(new File(inputFile));
while (scanner.hasNext()) {
credit = new Credit(scanner.nextDouble(), scanner.nextInt(),
scanner.nextDouble(), scanner.nextDouble());
creditList.add(credit);
System.out.println("read the list from file:"+creditList);
} catch (FileNotFoundException e) {
e.printStackTrace();
} finally {
scanner.close();
credit = null;
scanner = null;
return creditList;
// public void putCache(String cachename,List<Credit> list){
// cache = CacheFactory.getCache ( "VirtualCache");
// List<Credit> rand = new ArrayList<Credit>();
public Object put(Object key, Object value){
cache = (NearCache)CacheFactory.getCache("mycache");
String cachename = cache.getCacheName();
List<Credit> cachelist=new ArrayList<Credit>();
// Object key;
//cachelist = (List<Credit>)cache.put(creditList,creditList);
cache.put(creditList,creditList);
System.out.println("read to the cache list from file:"+cache.get(creditList));
return cachelist;
     public static void main(String[] args) throws Exception {
     NearCache cache = (NearCache)CacheFactory.getCache("mycache");
          new BlockScoleData().writeToFile(20);
     //new BlockScoleData().putCache("Name",);
          System.out
                    .println("New file \"myfile.csv\" has been created to the current directory");
     CacheFactory.ensureCluster();
     new BlockScoleData().readFromFile();
System.out.println("data read from file successfully");
     List<Credit> creditList = new ArrayList<Credit>();
new BlockScoleData().put(creditList,creditList);
     System.out.println("read to the cache list from file:"+cache.get(creditList));
//cache=CacheFactory.getCache("mycache");
//mycacheput("Name",new BlockScoleData());
//     System.out.println("name of cache is :" +mycache.getCacheName());
//     System.out.println("value in cache is :" +mycache.get("Name"));
//     System.out.println("cache services are :" +mycache.getCacheService());
regards
chandra

I've recently formatted my 10.7.4 mountain lion MacBook from 2007. The hard drive is wiped and I think it deleted to OS too. How do I put the OS back on it?

I've recently formatted my 10.7.4 mountain lion MacBook from 2007. The hard drive is wiped and I think it deleted to OS too. How do I put the OS back on it?

Wiping the drive does indeed delete the OS. Try this -
Boot to the Lion (10.7.4 is Lion not Mountain Lion) recovery partition by restarting the computer and holding down the command and R keys during startup.
If this works, reinstall from here. You must be connected to the Internet to do this.
If this does not work, possibly because you reformatted the recovery partition as well, you will need to reinstall from your original disks (assuming it came with 10.6 or earlier.) Boot to the disk by holding down the C key during startup and run the installer.
Best of luck.

I had my computer worked on and did not back up my itunes library. how do i put the songs on my ipod back to the itunes library

I had my computer worked on and did not back up my itunes library. Now the only music I have is on my ipod. How would I put the music on my ipod back into my itunes music library?

The music sync is one way - computer to ipod.
The exception is itunes purchases: File>Transfer Purchases
You should always maintain a backup copy. This is very important.

How do i put the song from the hard drive back in the new itunes library?

I had a laptop with music in the itunes library. I put the music from there in a hard drive. I bought a new laptop. How do i put the songs from the hard drive back into the itunes library on my new laptop.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

How do I put the music on my IPod onto the ITunes on my new computer? Help

Just got a new computer. How do I put the music, ect. on my IPod onto the ITunes on the new computer?
I downloaded ITunes onto the new computer, plugged in my Ipod, and a box popped up asking to either erase or transfer what was on my Ipod. I'd read before we put up the new computer that all you have to do is click the Transfer button and it will put all the music, ect. onto the ITunes account. Well, it didn't work. The page where it shows the bar that shows the memory is on the ITunes and shows exactly what it did on the old computer, but that's it. There's no music, nothing. I logged on to my ITunes account, that did nothing. What can I do? There has to be SOMETHING. Thanks so much!
Message was edited by: tbatt

1). Connect your iPod to your new computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchased songs and in some cases, videos and games) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

How do i put the file name right on the photo?

how do I put the file extension number or name right on my photo for clients to order?

DonRicklin wrote:
Or put the file name as Copyright in Metadata and add Watermark (Simple Copyright) on Export!
A plugin called LR/Transporter could probably automate that. However, I don't think many people will want to do this once all usages of the image are considered!
So an export plugin called LR/Mogrify (which calls in the utility ImageMagick as an output processor) would be the next suggestion. This should let you put more or less whatever image parameter you want, onto the image as an automated label - also add borders outside or inside the image boundary, place the thumbnail inside a larger square canvas, a few other options. Then that can all be saved as a LR export preset for greater convenience and repeatability in the future.

HT1766 Once backed up how do I put the photos into my photo file on my computer?

Similar Messages

Maybe you are looking for