HT1766 Screen locked Question: this is the same as the phonoe power is off

Cloud  ask screen locked.
This is the same as the phono power is off?

No.
Pressing the power button puts the iPhone in sleep mode, where the display is off but the phone is still on, "hibernating," and will come on again by simply pressing the home button or the sleep/power button.
Holding down the home button until you see "slide to power off" in red and then sliding it across the screen will completely power the phone down. In order to turn it back on you would need to hold down the power button again until you see the Apple logo, and wait for it to boot up.

Similar Messages

  • Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel. Please Help.

    Hello,
         I'm currently in mac recovery. I have a 21.5'' iMac (I think late 2011). I'm running OSX mountain lion and I think its kept up to date. Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel (not the beachball one). This seems to go on for ever (at least 3 hours) ant will not boot. Booting in safe mode does not work and results in the same problem. As I said earlier I can get tom recovery mode. Thanks Oliver.
    I have on/for my machine:
    Mac OSX mountain lion
    Windows 7 Pro 64bit
    4GB of ram
    OSX 10 FULL backups (External 2TB drive)
    500GB HDD
    Please ask if you would like more Information.

    Hello, disconnect any external drives for now.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT4061 How do you unlock your AppStore Lock, seriously this is bugging me because the App Store costumer service is down , APPLE HELP ME!!!

    How do you unlock your AppStore Lock, seriously this is bugging me because the App Store costumer service is down , APPLE HELP ME!!!

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).  The key behaves the same for the laptop keyboard and for an external Apple keyboard?  This just started in last week after 6 months of use

    My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). 
    The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard. 
    This just started in last week after 6 months of use.  The right shift key and other keys on the keyboard all appear to work correctly.
    Suggestions greatly appreciated.

    I have a solution to this issue now after a discussion with Apple Support.  Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences.  Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
    A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key).  I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility.  The SSD appears to be running better as a result as well.
    Hope that this is of use to someone else in the future.

  • I'm new to Mac, have had for approx.  I put my iPhone and iPad and my wifes in iTunes and now when i start my system on.  I now have a Guest user show up at the log on screen.  Is this normal.  And how can I take it off.   Tried the help and no luck

    I'm new to Mac, have had for approx.  I put my iPhone and iPad and my wifes in iTunes and now when i start my system on.  I now have a Guest user show up at the log on screen.  Is this normal.  And how can I take it off.   Tried the help and no luck

    Tatanka11 wrote:
    I'm new to Mac,...
    Then...  You may find these Links of Interest and Value...
    Show me how to set up my Mac.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    http://www.apple.com/findouthow/mac/
    Enjoy your Mac...

  • An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

    An insect got behind the screen of my MacBook and has since died, leaving a black dot on the screen. As this is a sealed unit the insect cannot be removed, any ideas.

    I believe your only option will be to get Apple to replace the screen for you, which won't be cheap.  If the machine is still covered under warranty, you could try to push the case that the screen must be defective for a bug to get in there.  Apple has been known to do free out-of-warranty service in some pretty unbelievable circumstances, that that is at their discretion, so be very pleasant and polite so they'll like you and want to help you out.    But be prepared to have to pay for the repair.
    Good luck!

  • I bought my first  iMac 27" i5 in November 2011 last year. Do you think there would be a update that will Features a Retina Display, Siri etc ?? So my iMac will be the same as the new one that will be released this year, Or will I have to buy a new iMac t

    I bought my first  iMac 27" i5 in November 2011 last year.
    Do you think there would be a update that will Features a Retina Display, Siri etc ??
    So my iMac will be the same as the new one that will be released this year,
    Or will I have to buy a new iMac to get all these new updates ??
    It would be a shame if I did because my iMac is only 6months old if that ..
    Kind regards Simon Trott Apple user and proud of it

    We're not allowed to speculate on future or rumoured Apple products, but we all know there'll always be newer tech coming along.
    The iMac you have is an excellent machine, be happy with it and get a good few years use out of it. By the time your machine is slowing down, whatever comes next will have been updated numerous times.
    I had the 2011 i5 27" delivered about 3 weeks ago. It's a cracking machine

  • How can I take pictures n videos  the same as  the screen?

    How can I make my pictures n videos come
    Out as big as the screen?

    but the problem is Can we make sure the string we get
    from table.getValueAt(r,c).toString
    is the same as the string show on the JTable UI.That probably depends on the TableCellRenderer that is asked to render that particular column. I would assume that the default behavior is what you want, i.e. that the renderer uses toString() on the Object.

  • My iPad keybsoard now opens in the middle of my screen.  Is this from an update? Can it be turned off? I'm not crazy about it.  Thanks!

    My iPad keybsoard now opens in the middle of my screen.  Is this from an update? Can it be turned off? I'm not crazy about it.  Thanks!

    Press and hold the 'keyboard' button at the bottom right of the keyboard and after a second or two a popup should appear - tap 'Dock' on that and it should move back to the bottom

  • I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from under about this mac and it is the same as the one one the bottom of the MAC any ideas ?

    I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from about this mac and it is the same as the one on the bottom of the MAC any ideas ?

    Did you purchase this product direct from Apple online, in an Apple Store, or through a third-party authorized reseller? Or did you buy it from an original owner whose Applecare plan was supposed to be transitioned to a new owner, by them?
    Do you have an original shipping carton the unit arrived in?
    If the product was a retail 'open carton' purchase and no
    back-track is possible, contact the reseller.
    And if the computer had seen a major service with logic
    board replaced, etc, it may have other issues with serial
    number vs one they may have assigned it. Usually a
    new logic board may have the SN flashed or if a unit
    was determined to be a reman, a new # assigned. But
    that would appear in System Profiler, if officially reman.
    If you registered a product anywhere with Apple, it would show on a web page along with its serial numbers, going back several years, at this page after you log in there.
    https://getsupport.apple.com/GetproductgroupList.action
    A blue text with triangle See all products and services opens an Apple ID
    sign-in window, then the page changes to show your items & info about them.
    If you run the serial number through online Lookup, what appears?
    http://www.powerbookmedic.com/identify-mac-serial.php
    Not sure if this helps, 'your product' should appear - if registered.
    Good luck & happy computing!

  • I recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

    i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue continues, take the device to Apple for evaluation and possible replacement.

  • IPhoto slide show stopped working, just showing the first chosen picture, the same with the sound. iPhoto 9.5.1(902 17), MacBook Pro and Maverics. How to solve this problem?

    iPhoto slide show stopped working, now showing just the first chosen picture, and the same with the music. iPhoto 9.5.1 (902.17), operating system Maverics 10.9.2
    How solve this problem?

    There's a bug with iPhoto 9.5 and Mavericks in that slideshows from Albums do not play correctly if they are sorted manually.  Only photos that have been sorted by date, keyword, rating or title will play from albums correctly.
    To have a slideshow with photos sorted manually use the slideshow mode in iPhoto.
    Send a bug report to Apple viahttp://www.apple.com/feedback/iphoto.html.
    OT

  • HT3302 I dropped my iPad & cracked the screen.  Can this be repaired? Or the screen replaced?  If so, the approximate cost?

    I dropped my iPad & cracked the screen.  Can this be repaired? Or the screen replaced?  If so, the approximate cost?

    See options in link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    It the same phone but you don't have to have data on it if you don't want since they are older phones.  We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone.  Mary

  • How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage

    Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
    My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
    thanx in advance for your response!

    Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
    Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
    The external channel instrument strip will look like this.
    Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
    In the channel strip inspector you can send patch changes to the SV-1.
    Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
    You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps.

Maybe you are looking for