HT1766 White Screen, NOTHING works! PLEASE HELP!!!

Okay, so I was on the Facebook app on my iPod Touch... Then the screen froze, shortly after that my screen turned white. The two button thing isn't working and i don't know what to do, i don't live near an Apple Store, and i can't go there. so someone please help me. by the way, it was about 10% battery when this happened and nothings happening when i plug it into the charger or when i go to iTunes, my iPod doesn't show up.

- Try here:
iOS: Not responding or does not turn on
- If not successful and you can't turn it off, let the battery fully drain. AFter charging for at least an hour try again.
- If still not usccessful then service is required. The Apple Genius Bar is recommended.

Similar Messages

Black screen nothing works please help me

Hey man, I'm sure my iphone isn't stuck in screen or something this morning after a night sleep it had the apple logo reboot stuck so I putted it in DFU mode and recovered it in itunes it downloaded the new ios but then it just stopped working, screen is black won't do anything when I put it into pc it won't connect.and any holding home and power button for '' secs then home or power all don't works. WHAT I GOTTA DO?! PLEASE HELP ME

I'll talk with my dad tomorrow and send it too some repairder.. I'm not going to pay anything for this and I won't let that happen since nothing is my faulth

HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

Should I use a network switch and plug my Yamaha A/V receiver and Yamaha DVD into it, then into the wireless router? Then the net into the routers net port???

HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

My 80 GB Classic shows a white screen, thats it, please help

So i may or may not have dropped it accidentily,(in a leather case) but anyway the only thing it will do is show a plain white screen, i've tried resetting it(menu+centre button) and ive tried completely restoring through itunes, and it went through that process fine but changed nothing
any thoughts or tips
please help

It sounds like a physically bad display. There are online services that will diagnose and fix iPods. One that I have seen mentioned is www.iresq.com. I have never used this service (or any other, for that matter) so this is not an endorsement. You can also Google "iPod repair" to get a list of service sites.

Nothing Working - Please Help

I have been using Skype for years, never once had a problem before. Now, all of a sudden I can't do anything on it. I can get to the home page, and I can click on a contact and get to the screen where I can message/call them. Making calls does not work, messages do not send. Sometimes I will get a call but only hear the sound it makes, I am never able to actually answer it. Other times, I can see that I'm receiving a call (no sound) but when I click answer, nothing happens. The farthest my friend and I have ever gotten in the past two weeks is the 'connecting' screen, but it crashes shortly after. I'm very frustrated and just want to skype call my friend. Please help me.

Try to install Skype for Windows desktop version:
https://support.skype.com/en/faq/FA12162/how-do-i-get-the-desktop-version-of-skype-windows-8-or-abov...

Ipod touch not responding blank white screen cant reset please help?

Please Help!!
I Just got the new a new ipod touch which was working fine. I began updating to new apple software and while doing so I lost internet connection and ipod was unplugged. Now all I get is a blank white or green screen even after reset. The ipod won't even register when plugged into computer or itunes. What can I do?? If I wait until the battery dies and run a restore will it work?? If so How do I get the games back I purchased recently? Please help I'm pretty new to all this.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My touch screen not working please help!!!

I recently baught a hp touchsmart 320-1010a running windows 7 home premium and then installed a new version of windows (windows 7 ultimate 64 bit) and now the touch screen doesnt work and i have non of the hp touchsmart applications like, hp magic canvas and others. i installed all the drivers from the hp webbsite and it still doesnt work
can somebody please help??? im dying here !

Hello Jerome19961996:
Sorry about your wipe out. Are you ready to try it again? This time we will do it the right way. We first have to get you back to orginal factory ok. Lets first see if can use the recovery manger. Type in your all program search box Recover Manager.Open it and click factory restore. If it is still there. If not then you will need to use your recovery disk. If you did not make a copy then you will need to purchase them from HP's parts store. Direction on how to order them are on your computers update page. Ounce you have your computer restored to factory condition. We can now upgrade to Windows 7 Ultimate.
This time we are going to use just the product key number. Goto all programs search box again and type in Windows 7 Upgrade Advisor. Open it and inter the product key that you purchased already. This time do not remove programs or delete any thing. Let it upgrade on it's own. This time everthing that is on your computer already will not be touched. The upgrade will only install what upgrades are needed with out disturbing HP's software. Ounce the initial upgrade is completed then go on line and download Windows 7 Ultimate add on's. Windows XP mode, XP Virtual Windows and Languages . http://windows.microsoft.com/en-US/windows/downloads/windows-7 You should be all set now. Thank and welcome to the forum. Please click on Kodus if this has helped resolved your issue. Thank you.frrw

Ipod nano 6th gen touch screen stopped working please help

Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
I have given up with my Nano and am now using an old model

White Screen of Death, Please Help

Hey Guys ;
I have an imac 2010 with windows installed on it (No MacOS is installed). today I updated the windows and shut it down and after a few hours I turned it on but now I am only getting the white screen ! it doesnt boot up at all ! I dont know if this problem is related to windows update or not. it may be only luck that this has happened after updating my windows.
I tried to boot it from CD or a flash drive , but holding the option key or d or c doesnt do anything. when holding the option key , even the mouse cursor doesnt appear !
the only thing that works is reseting the PRAM , when I hold the option and command and p and r , I can hear the second chime , but still it doesnt boot up. it is why I am sure my keyboard is working. also I tried to reset the SMC but no results.
also I tried command + r and command + v , but no luck ! only white screen.
I dont understand why I dont get any kind of output ! even if my hdd is broken I should be able to boot from a CD , right ? or at least it should show some kind of error message or logs. but only white screen.
do you have any suggestions ?

Yes , I was using the original grey DVD. I tried holding all possible keys ! nothing worked.
Eventually I found out my HDD is dead , I opened my iMac and disconnected my HDD and now it can boot from CD. but the problem is that it shouldnt work this way. I have had a PC for many years and even if HDD dies , you can go to bios or boot from other devices and etc. it shouldnt cause a white screen of death !
may be apple is doing this intentionally so it can charge people for fixig their imacs ! it is not something complicated , it was just a dead HDD and I was getting no error messages or anything, Just a dead imac. thats frustrating.

I downgrade my hp envy 15 from windows 8 to windows 7 now nothing works please help

I downgraded from windows 8 To windows 7. now nothing want to work.I knew I shouldn't but i like windows 7 more.it logs into Windows 7 but from there i can't do anything it doesn't want to respond to a mouse a usb or a portable dvd rom.and the worst of all I can't access the Internet it seems like the windows 7 has noadapter drivers so i know that i have to install intel drivers but i can't access anything so i don't know how to do this please help
This question was solved.
View Solution.

Hi:
Below is the link to the driver page for your model.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6894...
To get the graphics to work correctly you need to install these drivers in this order and reboot after each installation.
1.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
2.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
3.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127811-1&cc=us&dlc=en&lc=en...
Next, intall the audio driver and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127790-1&cc=us&dlc=en&lc=en...
Ethernet:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
Card reader:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1&cc=us&dlc=en&lc=en...
3D driveguard:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&dlc=en&lc=en...
Webcam:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141615-1&cc=us&dlc=en&lc=en...

I want to unistall mozilla off my desktop but nothing works.Please help?

I have tried everything in the community support pages in an attempt to uninstall Mozilla firefox off my desktop. Noting works. How do I get this off my computer. Please Help....Thank you

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps: However note this will just be the unintalling version.
'''Note:''' You might want to print these steps or view them in another browser.
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
Please report back to say if this helped you!

White Screen on Startup - please help

Hi,
I'm having problems starting up the imac when i have an external usb hard drive connected. When I turn the computer on or restart, it will freeze on a white screen until i manually turn it off by pressing the "off" button.
I'm pretty sure its the USB drives, as this doesn't happen when I have them disconnected, but its really troublesome having to disconnect and reconnect everytime i want to restart.
I have the startup disk specified in preferences for the windows partition in the internal hard drive. (the external hard drives that are causing a problem are not being used to boot)
any help is greatly appreciated.
thanks

found out its te cdfs partition on the external drive

Exclamation folder nothing works, PLEASE HELP!!!!!

I restored my 4th gen 20g ipod yesterday afternoon and now all i get is the exclamation folder. i have tried resetting, nothing. tried connecting to computer, nothing. CAN ANYONE OUT THERE HELP ME PLEASE?!?

If you've tried these.....
Folder and ! error.
Your Windows PC doesn't recognize iPod
.......and they don't resolve the issue, then your iPod needs service.
Mac Mini Super Drive; 1GB RAM; 20 Cinema Display; Airport Extreme; Maxtor 250GB ext hd Mac OS X (10.4.3) iPod 60GB (video); iPod 60GB (colour); 4GB nano.

Macbook won't boot up, nothing works, Please help

I have a 13' macbook pro (2009). In the past year, it keeps having problems. Basically, it freezes and won't boot-up. However, this could always be fixed via boot into safe mode, or reinstalling the OS. Previous hardware diagnostics never detected hardware failure. I've never touched anything inside the computer including hard disk, RAM, battery and everything else.
Today, it froze as it did before, and I could not manage to boot it by ANY means. After I press the power button, no grey screen, no apple, it just froze on a blue screen. I was running okay before it froze up. I had safari and skype running and nothing else.
The computer did not response to any of the startup key combinations (I've tried every single one that I could find online, including resetting NVRAM and SMC). It won't boot from installation disc, and, since startup keys did not work, I could not eject the disc. One strange thing is that when the computer froze at the blue screen, pressing power button will IMMEDIATELY shut down everything. That is, I did not have to hold the power button to shut it down, it seemed as if all the power was unplugged at once.
Could someone tell me, what could possibly be the problem? Thank you very much!!!

Could be a HD failure, logic board failure or the SATA cable failure. If you have AppleCare on it take it your local Apple Store or AASP to be looked at.
Roger

"Apple Id desactivated." when I try to download something from app store appers "Apple Id desactivated" I have tried everything but nothing works, please help!!

Please I need Help
When I try to donwload something , it says: "apple id desactivated" and there's nothing I cant do and nobody knows how to help me. I would thank any help!!

Perhaps this will help:
http://support.apple.com/kb/TS2446
Regards.

HT1766 White Screen, NOTHING works! PLEASE HELP!!!

Similar Messages

Maybe you are looking for