HT1766 will "setting up as new phone" erase all information already on that phone?
Will "setting up as new phone" erase all information already on that phone?
Restoring is the process that sets it back to factory settings. Setting up as a new phone means that it will not use any potential backups and will be a clean slate with no data just as the day you first purchased it.
Similar Messages
-
Why did my phone erase all contact for SMS and recent calls
Why did my phone erase all contact for SMS and recent calls
I googled it found a solution add + and country code to each contact number in your contacts and they will id
-
If I reset and delet all information on one I phone will it erase information on my other iphone sharing the same ID and being synchronizes
D with the same iTunes ID ?If I reset and delet all information on one I phone will it erase information on my other iphone sharing the same ID and being synchronizes
D with the same iTunes ID ? -
I was syncing everything to itunes and I tried to do my contacts, not knowing quite how. I ended up erasing all of them from my phone without any of them syncing to my computer or itunes. Is there any way I can get them back? I really need them all.
There are lots of ideas floating on the web for this particular issue - all of which I tried. I had the same problem and it turned out to be my USB cable. I thought the cable was fine as it would charge my phone and play but the data transfer pin was bent. I replaced the cable and it fixed the problem. Worth a shot as it is an easy fix!
-
I used an upgrade from a different phone to purchase a new iPhone. How do I assign that phone its original number (not the one that it was upgraded from)?
Phone number of the device is assigned by the carrier.
Ask the carrier. -
i synced my phone that had an itunes account but no music on it to a computer and it erased all the music on that computer. is there any way to get the music back?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
HT201274 When I go to erase all content and settings my phone ask for a password
When I go to erase all content and settings the phone ask for a password.
The same password, you use to unlock your phone, use that passcode.
-
When starting a Macbook Pro that has quit by using the disc that came with it, will the "restore from backup" option erase all previous data stored on the machine?
rsbann wrote:
When starting a Macbook Pro that has quit by using the disc that came with it, will the "restore from backup" option erase all previous data stored on the machine?
As long as the backup on your external drive is fine, it will restore your Mac to exactly how it was on the date of that particular backup, all data included. I have used it before and have retained all data from the date of the backup.
Cheers
Pete -
my iPhone was stolen last night and I'm trying to recover all my photos from that phone and get them on my mac laptop. The iCloud photo stream only imported 1,000 photos from my stolen phone. How can I retrieve all of my other photos?
You have to reset the device to Factory Settings in order to restore it from an iCloud backup. You probably want to back it up as is before you do this.
To do the reset after you have backed up the current device, go to Settings>Reset>Reset all Content & Settings. This will erase the device. If you are signed onto iCloud with Find My iPhone turned on, go to Settings>iCloud and scroll to the bottom to sign out of iCloud before you do the reset.
Once you have reset your device, you will set it up like a new phone. When it asks if you want to restore it from an iCloud backup, select the backup you want to restore it from.
Cheers,
GB -
I lost all information of My i phone 5S ID , i phone device massage appears asking to make activation by that missed ID information. my finger print configerd before getting locked , can it help ? If finger print will not help i have all purchsing information from Apple online shooping .
Please help with needfull support.
Appreciated your attention & support .Hi morton2,
Thank you for using Firefox Sync. Without a recovery key, I am sorry you cannot recover right away. I know at the top of my head that it is possible to move the account to the new Firefox sync. [https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync How to set up the new sync]
However this is currently not available in version 28, but version 29 (Beta and Aurora) On those versions you can go to about:accounts and select I already have an account. It *as far as I know* does not require a recovery key.
Once you have it set up, make a copy of the profile folder. you can copy it to the new installation of version 28 if that is the version you wish to continue using.
I hope this helps. -
How to Set Up Content Blocker to Block All Sites Except Those That Are Listed?
How to Set Up Content Blocker to Block All Sites Except Those That Are Listed by Firefox?
One other item I thought I would pass along...
I noticed that the NVG589 gets terribly confused if a device behind it isn't setup properly first to be a static address.
Here's the behavior: Say you have a router of your own and you intend to give it one of the addresses from your static IP block. You decide to set it up first and don't make the changes initially in the 589 to force it to be a static IP of some kind-- whether in the private or the public block. You configure the router in this case with DHCP. Your router starts handing out addresses in its own IP range however your configured it.
But look what the 589 thinks is happening: it sees the DHCP client name associated with the same MAC address changing constantly. It makes entries for each different client name in its device list, sometimes aging out, sometimes not.
Now trying to save the private IP will result in a "missing data" error. Worse, trying to change things to a public static IP will result in similar messages about the IP being in the wrong range.
The same issue can also occur if the device was setup statically in the private range and you try to change it to a public static IP.
The only way to fix this:
1) If you intend to advertise the router on an IP from your static block, disconnect all devices from the router and the RG, except for the router you want to setup. Wait for the RG to see them as "offline" in the device list. Alternatively, if you intend to setup another device or server on a Static IP, make sure it is the only device connected to the RG.
2) Switch the IP allocation to "Public"
3) Renew the lease on the device
4) Go into the IP Allocation page and fix the IP to one of the public static IPs from your pool
5) Reconnect all devices.
Generally, the best practice is to setup each static IP device before connecting any others to the RG. -
I have erased my Ipad remotely thinking it was stolen. It has now been returned, but I don't want to switch it on and erase all information. Can I reverse the erase? If not, how do I restore the info?
You can't reverse the erase.
Restore from your iTune or iCloud backup. -
Why can't I run the new upgrade? All I get is that I am not connected to the internet, even though I am connected???
If you haven't, try updating through iTunes while connected to your syncing PC.
-
HT203167 I had a glitch in my phone and all information was lost?
I had a glitch in my phone and all information was lost. I even had to rename my phone. I still use the same email and have ALL of the receipts sent to that email of previous song purchases. I would like them back. Apple says I have to repurchase?
Depending upon what country that you are in (and whether they are still in the store) you might be able to re-download them via the Purchased tab in the iTunes store app on your phone. If you are not in a country where music can be re-downloaded then do you have a copy of them on your computer's iTunes or on your backup of your downloads that you can use to resync them ? If not then only iTunes Support could potentially grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
You should be able to re-download apps via the Purchased tab in the App Store app, and ibooks via the Purchased tab in the ibookstore in the iBooks app. -
hello all....i need some help 2 can activate my 4s,i paid 4 unlock code and cant actvaite my phone ,the server support told me thats phone unlocked done.but apple server not say that..my imei 990001021636113
There is no such thing as an "unlock code" for an iPhone. It's done through iTunes after being approved by the carrier it is locked to.
Go back to the carrier it is locked to and find out what the status is. If you paid someone else to unlock it, you got ripped off.
Maybe you are looking for
-
Kernel Panics - 2013 13" MacBook Pro with Retina Display
Hi everyone, I've been experiencing some system freezes lately, and upon investigating the console logs, each freeze seems to correspond to a kernel panic, which is listed as such: 1/20/14 9:25:19.000 PM kernel[0]: BootCache: too many history cluster
-
Hi guys, I've implemented the following scenario: BPM Process where I've got a async receive (from a file receiver), a sync send (to an ABAP PROXY) and a send async (to a file sender). The scenario is working great, I've catched 'Communication except
-
Bapi or FM needed to read contract (vendor) data in 4.7 version
Hello Folks, I am working in 4.7 version ... I checked in se37 but couldn't find suitable bapi for reading the contract data(vendor contract).In ecc 6.0 we do have bapi_contract_getdetail bapi for reading the contract data.. I couldn't find any bapi
-
I have forgotten my password to my ipad. I have it plugged up to itunes now. how can i restore the password?
-
Hi Gurus, Please advise how to configure Print option in WAD report. Iam able to do export to excel & pdf without any issues. What Iam looking is to have a similar button on the report called Print and when we click it should come up with print setti