HT1773 Unable to erase and re-install leopard OS in my macbook pro

Hi all
I wanted to re-install my macbook pro by using installation CD (given by apple). But when I tried to restart, unable to restart the computer even I was holding the C key.
How can format and re-install?
Kindly help
Regards
Suresh

There is not much to work with, Suresh.
For all we know it may have never worked, or it may be the wrong grey disk for your MacBook. You have done pretty well to go this long without requiring its use.
Two months ago I would have said buy another disk, the coloured retail 10.6 DVD with the image of the Snow Leopard. They used to be about $30, however finding one is now as difficult as finding a real one in the Himalaya.
If you live in the US, the 10.6 DVD can be ordered over the phone. Other countries… hard to say.
Essentially, I would question the disk,
which implies trying another 10.6.3 DVD that you know works,
or equally, inserting the one you have into another Mac just to see if that other Mac can see it, but not to proceed, just to see if it registers as bootable, using the alt/Option key during the startup phase.

Similar Messages

  • Erase and re-install OS X in old MacBook Pro

    The same friend I sold my circa 2006 MacBook Pro to has asked me to erase it and re-install the OS. I must have upgraded it to OS X.5.8 before parting with it. I don't have the original discs, but I have discs. I have OS X Discs I have purchased from 10.1 until there were no more "disc". The optical drive rejects everything I feed it. 10.4-5-6-7. It just spits it back out. I have a USB optical drive, the problem there is I keep getting warnings that my "USB drive is drawing too much power, and it will now be ejected". I don't have a power adapter for the drive. Assuming something might be adverse with the internal drive, is there another strategy? Clone the OS X DVD disk to a flash drive?

    Hi razzman,
    Welcome to the Apple Support Communities!
    One option you may want to take a look at is using Remote Disc.
    DVD or CD sharing: Using Remote Disc
    http://support.apple.com/kb/HT5287
    Have a great day,
    Joe

  • I'm unable to do a clean install of Firefox 6 on Macbook Pro OSX 10.6.8.

    I'm unable to do a clean install of Firefox 6 on Macbook Pro OSX 10.6.8. After trashing the firefox.app from the Applications folder and trashing a related file in the Library folder and then reinstalling, all of my previously opened windows and tabs reappear. And the history and bookmarks are populated too! Then, the computer freezes up so that I must reboot. Because these windows automatically open and the history and bookmarks are populated with my old history and bookmarks, I believe this is not a clean install. Please help.

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • How can I erase and re-install Leopard with dropped-in DVD?

    Hi,
    I bought my first mac on the day Leopard was released. It came with Tiger pre-installed, and Leopard DVD was dropped in. When I install Leopard, it didn't even give me the option for a clean installation. So I guess the DVD is for upgrade only? Now the permissions on my system is messy, and I want to erase everything and re-install Leopard. Is it possible? Do I have to install the Tiger from original DVD first and then upgrade to Leopard?
    Ironically Windows Vista (Ultimate) runs beautifully on my iMac under Boot Camp, where I do most work related things. When I re-install Leopard, is it possible to keep Windows Vista partition unaffected?
    Thank you.
    Rxiesling

    You need an ext HD to backup SL, either using something like Carbon Copy Cloner, SuperDuper!, or Disk Utility or using Time Machine to backup just the SL partition.

  • Installed Leopard On B.N. MacBook PRO and Imovie crashes before it opens

    I purchased the machine and it came with the Leopard install DVD. After installation I checked to see if all apps. open, most do except for iMovie - any ideas to help remedy this?
    Thanks!

    download the system updates from apple, there are fixes for this bug...
    most ilife 08 apps were crashing...
    install the updates from apple and ull be good to go...
    sys pref, then chose software update

  • Unable to erase or format a CD on mid 2009 MacBook Pro

    I just upgraded to Yosemite, with all other available updates.  I'm trying to copy jpeg images to a CD, but the SuperDrive says that that the CD can not be erased.  It does not give the option to format the disk.  The CD does not appear on the list of volumes.

    Unless it's a CD-RW disc it cannot be erased.
    OS X Mavericks- Burn a CD or DVD in the Finder

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • My Mac is three years old and has crashed about 10 times. I have had to erase and re install Snow Leopard every time,yet it keeps happening.

    I have communicated with apple care every time and they keep telling me there is no problem,so why does it keep crashing. I took it in for repair under warrenty and they told me there was nothing wrong with it yet it crashed again two weeks later and has crashed another 5 times since then,I have to erase and re install each time. It has now crashed again , i have re installed snow leopard and all i get is the spinning wheel and nothing loads..Im over it. I have several mac products including two other imacs that are running fine..

    Run Apple Hardware Test on your computer, the next time your machine crashes try running disk utility on the hard drive.  You shouldn't need to reinstall the OS each time your system crashes, if that the case then you could have a bad hard drive. 

  • About to Erase and Re-Install Snow Leopard. Anything I should know?

    I'm about to erase and re-install Snow Leopard on my 2009 21.5' iMac. Something got snarled up during the migration process from my old 2006 iMac to this new one and things have been steadily getting more and more "weird" over time, so it's time for a clean slate.
    I have a few specific questions and would be grateful for any other tips you may have regarding this operation as I've done it on Windoze computers many times but never done it on a Mac for obvious reasons
    My specific questions are as follows:
    1. If I archive my various Mail inboxes, can I just put them back after the re-install and have all my messages back again?
    2. Does anyone know how to save Firefox Bookmarks, as it doesn't have an export option like Safari.
    3. Any other things I should be aware of.
    Your help and suggestions will be much appreciated

    After what you want to do, you'll still get the same permissions repair report. Ignore it as detailed in http://support.apple.com/kb/TS1448 (which doesn't include the recent JavaVM warnings).
    Your bootstraps solution doesn't hold water. OK. Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your test account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
    The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

  • If I have to erase and re-install......

    Will I lose all of my applications during that process? My SL install failed and DU says the disk cannot be repaired, back up files, and erase and re-install the OS.
    Do I lose all of my applications when I do this? Illustrator, Photoshop, etc???

    Will I lose all of my applications during that process? My SL install failed and DU says the disk cannot be repaired, back up files, and erase and re-install the OS.
    A quick note here: you can be sure that the install failed because the disk was damaged, not the other way around. I just want to head off yet another string of "Snow Leopard destroyed my system!" complaints before they get started.
    Now, to a solution... when you say Disk Utility can't repair, was that when you were booted from the Snow Leopard disk and running Disk Utility from there? I'm assuming so, but if not, you need to try that... Disk Utility can't repair the current boot drive. If Disk Utility isn't working, you can try [DiskWarrior|http://www.alsoft.com/DiskWarrior/index.html] or [TechTool Pro|http://www.micromat.com>. Neither of these are free, unfortunately, but they're both excellent utilities. If DU, DiskWarrior and TechTool Pro can't fix the drive, it's not fixable.
    If it turns out not to be fixable, you'll need to erase the hard drive and reinstall everything. If erasing doesn't work, your hard drive has failed and will need to be replaced.
    Do I lose all of my applications when I do this? Illustrator, Photoshop, etc???
    You will have to reinstall those apps from the original install disks. If you don't have the disks anymore (I'd have to question why not), then you should have a backup that includes those apps and all support files... this is a less-desirable option, since you may not know where all the support files are and may have trouble getting the apps working again.
    Also, as was already pointed out, your documents are more important and less replaceable than your applications. Do you have a backup of your documents? If not, you're going to need to think about file recovery before erasing the hard drive. Don't expect to recover everything, though. I don't have experience with Mac file recovery utilities... you never need one if you keep good backups. Google "mac file recovery" for some options.

  • I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how  to uninstall this one and reinstall snow leopard?

    Hello,
    I have installed mountain lion on my macbook pro ,but it made my mac very slow. Would someone please tell me how  to uninstall this one and reinstall snow leopard? I tried to do it by my original CDs but macbook  pro didn't let me to do it.
    Thanks

    It would be easier to just fix whatever is making your machine slow.
    I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
    Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.

  • Erase and re-install on my powerbook G4 12 inch

    I lost my Mac OS X v10.2 install disc and was wondering how I can obtain a replacement? Of course, once I do so, what is the proper procedure to erase and re-install?

    Hello and Welcome to Apple Discussions ...
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    To see your serial number, from the Apple Menu click: About This Mac Where you see:
    Version 10.x.x click there once and the Serial Number will be displayed.
    Carolyn

  • After apple store erased and re-installed iPhoto has gone. how do I get it back ?

    macbook air 14 mths old wouldn't turn on. apple store said corrupted hard drive. erased and re-installed os x 10.8 . now restoring back up but iPhoto missing and iTunes and app stores says os version doesn't support them. What can I do ?

    Visit the store, log in and download again, what you can get. Apps are no problem, even videos.
    Regarding music, this is not since ever that you can download music again. So if there are older purchases, like from 5 years ago, you can't simply download them again from the store.
    In this case, contact iTunes support saying you lost all music purchases from before a certain date and kindly asking if they would make that available for download for you and most probably they will. The store keeps your purchase history, so they can verify.
    After all or at least most of the stuff is ack on HDD again - make a backup! And later, regularly make backups again. Remember it.

  • Do I really need to erase and re-install OSX?

    Hello all, 2 days ago when downloading an update to the OSX Operating System there was an error in the installation, bundle ended up in trash. Now I get an error message with most of my third party software like MS Word, Entorage, Firefox that there is a "conflict in the shared library". Also, it looks like when I empty trash that update bundle is still there.
    I tried repair disk permissions and AppleCare tried a few things but disk could not be repaired so the suggestion was transfer all critical files and erase and re-install OS.
    Is this sound advice? Any thoughts?
    Much obliged in advance,
    JT
    PowerBook G4 Mac OS X (10.4.7) Aluminum 17"

    Tiger 10.4.6 is out on DVD for $114 @ Amazon if that helps.
    TechTool Pro 4.5.1 is shipping now from MicroMat which is (I think) up there with Disc Warrior now with a 'few' more features, and regularly updated.
    Do you not have a FW backup drive with room on it for an emergency and backup OS on it? That would be first thing I would be doing is backing up and having an emergency boot drive. Needed to find one for family member and it is either FW800 320GB $207 from OWC or slightly smaller.
    No matter what, yes, transfer the files. Maybe even boot Tiger DVD, Disk Utility, Restore, and do a volume copy.
    Only once have I seen Apple offer a CD with the combo updater ($25) unfortunately it was obsolete the next day due to bugs in USB support in 10.2.4/.5 and, didn't even come with a few other "goodies" like latest QuickTime and other nice or essential software updates.
    I tend to run fsck before installs or updates, to run Applejack and clear out swap files and cache folders (which does seem to help, too) and maybe Disc Warrior and/or TTP4. And only then download the combined updates to another drive or partition. Not easy when it weighs in at 140MB, but delta updates seem more like "hit or miss."
    I assume you can use FireWire Target Disk Mode or something.

  • Erase And Clean Install Error

    Hi Guys,
    I'm attempting to reinstall OSX on a Macpro - 10.4.10 using the Erase and Clean Install. All goes well with the first installation disc and all is going well with the second disc until it gets to garageband where it freezes and then stops installing and says that I need to try and reinstall again - I''ve tried three times now - is there something I am doing wrong or need to do differently to bypass this problem.
    Thanks

    First off, there is no such thing as an erase and clean install option. These are these Mac OS X installation options:
    http://discussions.apple.com/thread.jspa?messageID=607614
    So what are you doing according to the actual installer?
    Message was edited by: a brody

Maybe you are looking for

  • What is the 1/2" slit on the right front edge of the MacBook Pro?

    I recent bought a 15" Macbook Pro (2012 Model without the Retina Display). I love it, but I notice there is a little 1/2" slit on the right front edge of the laptop. Looking on the Tec Specs Page that lists all the ports and connections it is not lis

  • PDF export for  columns formatted as HTML

    Hello, I've created a report having some columns formatted as HTML . in the PDF file exported from BI Answers dashboard, HTML tags are shown instead of formatted value. (for example : "div style="width:100%;background-color:#FF3300">89.12%</div" inst

  • Interakt File Upload incompatible with Firefox?  Recommend ASP Upload tool?

    Hi, I've been using Interakt's File Upload tool for quite some time but have recently been made aware that it doesn't work in Firefox! Anyway, I notice that Interakt no longer exist now, having been bought out by Adobe some time ago as it turns out.

  • XML report display in TestStand 4.0

    I've just migrated from TS 3.5 to 4.0.  4.0 is more user friendly than 3.5.  But I can't display my XML report after running sequences.  If I choose other report format, everything is fine; if XML is set, the report file would be generated but I can'

  • Redirect based upon a form entry.

    I'm trying to get one of two pages to load depending on a form entry.  The form consists of one text field (asking for the person's zip code),  If the zip code is found in a master table, I would like them to be directed to one page.  If it is not in