HT1782 storage system fail or repair failed

When I use the disk utility, I click on the first volume which reads ST9500325ASG, it gives me a message "storage system fail or repair failed".
When I click on the disk below which reads Macintosh HD. It says the volume 2FE etc.....appears to be ok. The volume Macintosh HD appears to be ok.
Why the error message on the first? Also I did encrypt the volumen.
I have Mac OSX 10.7.4
Thank you.

The top-level item, ST9500325ASG, is the disk. The items below are that disk's volumes/partitions. You'll get different results selecting each. Step one is to boot with your SL install disk, launch Disk Utility, select the disk, and repair it. You might turn off FileVault before proceeding. i don't use it, so can't address any issues with it.

Similar Messages

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

Storage system verify or repair failed,cannot download system updates,in ColorSynk found 4 bad profiles, in ITunes I still see my old Apple ID. What I can to do ,please identify it for me.

I have changed my Apple ID and may be anything wrong did with Disk Utility.
So , I could not download system updates by normal way and downloaded them from Apple site via Folx and have them installed thus.
I have tried check out condition of Toshiba disk and got messages of errors.
What can I do in this situation?
In Disk Utility:
Storage system verify or repair failed.
Problems were found with the partition map which might prevent booting.
Problems were encountered during repair of partition map
S.M.A.R.T status verified
In ColorSynk Utility:
Searching for profiles...
Checking 64 profiles...
/Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/Smokey.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Prosystem ufiles/TealMagentaGold.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
   Tag 'pseq': Required tag is not present.
Verify done - found 4 bad profiles.
In ITunes :
I see my old email as Apple ID
I going to change Lion OS to Mountain Lion OS ,is there any troubles ahead because of problems described above? And how to fix all that ?
Thank you in advance.
Message was edited by: TatianaTia

PS
In Disk Utility all looks so:
Verifying partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were found with the partition map which might prevent booting
Error: Storage system verify or repair failed.Verifying and repairing partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
I will be greatly appreciated for any considerations or advise (*.*)

2011 macbook pro OSX maverick, error: storage system verify or repair failed

Hi there,
My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
I also get: error, storage system verify or repair failed.
S.M.A.R.T staus is verified
None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
Any ideas???

I have the same issue. Not able to fix it.

Error: Storage system verify or repair failed

My MBP frooze a couple times yesterday; I loaded Disk Utillity and with the top level "122.33 GB APPLE SSD" selected I tried both "Verify Disk" and "Repair Disk." I get a pop up that says, "Alert: Storage system verify or repair failed." On the detailed section it states: "Problems were found with the parition map which might prevent booting. (In red letters) Error: Storage system verify or repair failed." When I select "Macintosh HD," I encounter no problems with Repairs or Verify Disks/Disk Permissions. I have always been able to select both and do the Verify/Repair options and haven't had any errors. I am running Lion and do have encrytption enabled. When I boot in recovery mode, I am able to Verify and Repair Disks on the "122.33 GB APPLE SSD" level without any problems. Only when I boot normally and attempt to Verify or Repair the top level. I am thinking its an encryption related error and not actually an issue. Any thoughts?

My sert up looks simple in 10.6 and 10.7 disk utility             500GB Physical HD
                                 slightly to the right virtual volume partition (icon)1 Mountain Lion
                                                                                                        2 Lion
                                                                                                        3 Snowleopard
                                                                                                        4 empty
In Lion Disk Utiity on First Aid if I choose 500HD and repair disk In red it states alert storage system verify or repair failed disk permissions are greyed out that means they can not be clicked.
If I choose Mountain lion (I am booted in Lion) it will repair permissions and veryfy and repair disk.
If I choose Lion (I am booted in Lion) it will verify and repair permissions but only verify disk. NOT repair !
( it is said it can not repair itself so we need to be booted into lion recovery disk disk utilities)
If I choose Snow leopard (I am booted in Lion) it will verify and repair permissions and verify and repair disk.
In Mountain lion the partition map or set up is strange.
                                                                             500GB Physical HD
                        slightly to the left virtual volume partition (icon) 1 Lion
                            slightly to the right virtual volume partition (icon) 2 Lion
                        slightly to the right virtual volume partition (icon) mountain Lion
                       slightly to the left virtual volume partition (icon) mountain Lion
                                                                                           3 Snowleopard
                                                                                           4 empty
Do I have 6 partitions 2 Lions 2 Mountain lions?
And on Mountain lion and lion on sub volume only FirstAid and Partition is shown not erase or restore !
In Snow leopard disk utility Mountain lion and lion shows as incompatable so can even partitioned or repaired.
When partitioning and installing 3 OSX's on 1 HD the partition table changes with Mountain lion and Lion.
And if you have Vile fault turned on you can not access the Mountain lion and lion repair permissions and repair disk ,also can not access the recovery disk when booting using options.
That means you have to turn Vilefault or Gate keeper off.
Apple Japan said it does not support more than one OS per HD !
It is a resl mess they do not fix these things and show photes and explanations of different scenrios on disk utility.
we want to use all our OSX/s on the same machine because many applications do not work on different platforms.
They should work out a solution when bring out new OS

Os x could not be installed on Mac book pro because storage system verify or repair failed. When i open disk utility HDD does not let me repair.

os x could not be installed on Mac book pro because storage system verify or repair failed.
When i open disk utility HDD does not let me repair.

In order to repair the system disk you must boot from another disk drive. The operating system will not allow the disk drive it is running from to be repaired.
Book the MBP and create a bootable clone on an external disk drive. Then boot from the external disk drive and repair the system disk drive from there.

Disk utilities: storage system verify or repair fail

The Verify failed when checking the drive at the physical disk level, but the main voulmes passed. Is this "normal", i.e. should I just be checking the volumes?
Thanks

10.7 boots into a Recovery partition (command c boot) then can check the condiiton of other partitions on the drive.
To repair the entire drive it the computer needs to be booted from Lion w/Disk Utility on a external drive
Either use Carbon Copy Cloner and make a option key bootable clone on a blank external drive and use Disk Utility that way or create a data recovery drive
Most commonly used backup methods explained
Create a data recovery, undelete boot drive

Storage system verify or repair failed

Had problems with Time Machine and accessing external backup drive. Both Mac Hard drive and extenal drive encrypted and external drive not opened with password. Eventually located corrupt file on external drive. Have managed to get time machine to backup to external hard drive but now get above error message when attemting to verify/repair Mac Hard drive. Along with :
Invalid Volume Header @ 0: Incorrect block type
Invalid Volume Header @ 749296614912: Incorrect block type
Disk0s2 is not a CoreStorage volume.
Obviously disk will not repair.
Any ideas as to what to try next (is this where LIon Recovery comes in, or does it even work for 2.8 GHz Core 2 Duo Macs?)
Any advice gratefully received.

Answered my own question. Went to Lion Recovery Partition [Restart + (Command-R)]. Ran Disc Utility in Lion Recovery. No problem with Macintosh HD. Restarted & showing no problem on verification now.
Found a few other postings going back to O/S 10.4 detailing similar problems both with internal and external drives. General consensus looks like First Aid Verify can throw up spurious errors at times .... Hope they are right

OS X could not be installed on your computer File system verify or repair failed

Downloaded OS X Yosemite update through Apple Store and attempted to install it on my mom's 2013 21" iMac running OS X 10.9.5.
However, a few minutes into the process I received this message:
OS X could not be installed on your computer
File system verify or repair failed. Quit the installer to restart your computer and try again.
Tried restarting several times to no avail. Ran disk utility and saw:
Invalid node structure.
File system check exit code is 8.
Error: This disk needs to be repaired.
Repair disk button not available for Mac HD, but is available for 1TB Apple HDD. Is there any way to abort the OS X Yosemite installation?

TThe Disk Utility cannot repair the disk it resides on. The way I get around this is to use an external hard disk as my startup disk and run did utility from that. Most time then the primary disk on your iMac can be repaired.

Error: File System verify or repair failed :-(

I'm hoping that someone here can tell me that I don't really have to worry about my new 13 inch unibody Macbook, which I bought last November. I'm travelling until April and, of course, don't have my install (or any other disks) with me.
Today I installed some software and then ran 'repair disk permissions' to check that all was in order - which it was. However, my finger slipped (I actually find the new trackpad quite inaccurate from time to time but I guess that's my fault)- instead of closing Disk Utility I clicked on Verify Disk. I thought I would let it run its course ... imagine my surprise when this was the result ....
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file MB510073_06BLOCKED.scap
(It should be 2082 instead of 1041)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume free block count
(It should be 41730138 instead of 41731179)
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
Can anyone throw some light on this problem for me, please?
Cheers
Tricia

What software is on the package? I believe Tech Tool Pro can do a directory repair job though Diskwarrior is, as the other poster observes, premier.
Sometimes running verify on the same drive from which you are booted can produce spurious errors because the drive is constantly changing and verify can't keep track of everything and reports errors.
Errors should be taken seriously and corrected before things get worse. It could ultimately end up in your losing files and having the computer crash. If nothing else make sure you have a backup of your data files.
You can try running Verify in Safe Mode where the computer is running under a more restricted environment and see what it says.
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
Safe boot mode runs a directory check command similar to that used by Disk Utility's repair. In Tiger it ignores some stored information (cache) that is normally read that speeds up the boot process, and it moves some other caches to the trash. It also uses only System fonts and disables all Startup Items, third party items, and any Login Items.
Failing all else there are several tools that run from Single User Mode, including fsk and Applejack. I would run these after backing up the files since occasionally any repair attempt (even with Diskwarrior) can go wrong and make things worse.
[Applejack|http://sourceforge.net/project/showfiles.php?group_id=79562]
Very informative [Macworld Applejack article|http://www.macworld.com/article/135377/applejack15.html]
[Mac OS X: How to start up in single-user or verbose mode|http://support.apple.com/kb/HT1492]
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]

Why is os x not installing on my Mac book it keeps telling me to restart the computer an saying file system verify or repair failed

nit now I can't use my computer wth

What is the EXACT model/year MBP and what OSX are you trying to install? What is the OSX that is currently installed?
It seems you may have HDD issues.
Ciao.

Unmounted External Hard Drive, Error: Filesystem verify or repair failed

Earlier today, I disconnected the external hard drive while it was working.
Now, the External Hard Drive won't even show up on my computer. However, on the Disk Utility it does. I have tried to verify & repair the disk. Plus click the mount button nothing work.
Whenever, I ran the system verify or the repair. I got this error: Error: Filesystem verify or repair failed
Ok. So I have searched all over the internet and forums. Tried everything. Nothing works.
I even tried Disk Warrior. It would work for a while, then when it came to step 8. It would make my computer go black and hold down the power button to restart.
Any suggestions? Please let me know, I would like to recover the files if I can. Thanks.
P.S.Yes I have tried to restart multiple time. I have tried with my USB 2.0, firewire 400, & 800 too.. Nothing.Everyone except the USB shows up in the disk utility but doesn't mount.

I have had the exact same situation occur, but was able to follow these steps to successfully save everything!!
The Unix program "dd" will instruct a drive to stream out all of it's data from beginning to end without regard to file structure, therefore creating an exact block-for-block duplicate. By doing this, it will allow you to copy everything off without having to mount the drive. It also ignores any corruption or physically damaged blocks on the drive which would otherwise crash or freeze the Finder. It saves the data to a disk image file which you can then open and use without fear of imminent failure (the format of the disk image will be the same as the original drive). Now that the data is preserved, you can safely go through and recover your files. Keep in mind that if a file was damaged or corrupted on the drive, it will be unusable, but at least you'll be able to get to the good ones safely. In my case, using "dd", I had no problems and got every file off. If it doesn't work for you, at least it's impossible for just trying it to further damage your files. I can recommend a few other remedies if this doesn't work for you.
Note: The computer must be able to at least recognize the drive. That means either 1) It mounts 2) When you connect the drive the Finder asks if you want to erase or ignore, click ignore and you should be able to do this, or 3) Nothing happens in the Finder, but the volume in question does appear in Disk Utility. If you connect the drive and absolutely nothing happens and it never shows up in Disk Utility, it won't work.
Note: As always, it is suggested that you backup important data on your startup disk before proceeding with stuff like this. It is possible to wipe a drive by mistyping a terminal command, so double check before you hit enter.
_Now, on with the show!_
Prep: Restart your machine so that it goes straight to the login window. Enter your user name and password. As soon as you press enter after your password, immediately hold down the shift key until the Finder finishes loading (this prevents any background startup items from running that might interfere).
1. Attach the drive to the computer and make sure you have another drive with enough free space to hold the entire capacity of the bad drive, not just it's used space, but the WHOLE size of the bad drive (for exception, see very bottom of this post).
2. In Terminal, type:
+diskutil list+
Look for the drive you want to recover in the "name" column, then write down it's "identifier" (ex. disk1s2)
3. In Terminal, type:
+dd bs=512 if=/dev/disk#s# of=/my_directory/image.dmg conv=noerror,sync+
!! Replace "disk#s#" with the identifier you wrote down before !!
!! Replace "/my_directory/" with the path to where you want to save !!
!! Replace "image.dmg" with the name you want to give the disk image (must end with .dmg) !!
4. To confirm that something is happening, open Activity Monitor (in the Utilities folder) and click "Disk Activity". Once you determine an average transfer rate, divide the size of the drive by that and then divide by 60 to see how many minutes it will take to finish. *+! ! FOR LARGE DRIVES THIS WILL TAKE A VERY LONG TIME ! !+* To be safe, do not use your computer for anything until the process finishes, you can leave Activity Monitor open so you can see when it's finished.
If you're only really concerned about a certain files and you know their exact path on the bad drive, let me know and I can give you modified instructions to copy just those files, saving the time and space of doing the whole drive.

"Disk not readable...", Verify & Repair fail, Zero Out, HFS+ still fail

First, a time machine error came up saying the volume could not be found. Tried disk verify, disk repair (in disk utility) restarting, reconnecting, but to no avail. On restarting, computer says "Disk was not readable by this computer." I then Zeroed out all the data and reformatted the drive to Mac OS Extended (Journaled). TM worked for most of the day until tonight when another error message came up saying that the next backup failed because it required 168GB, but only 49GB was available. Yet I had done virtually nothing since the last backup the hour earlier. I clicked "Back up Now" to try and get it to maybe re-evaluate the situation and maybe do the backup, but instead, I get the error that I got before - "The volume could not be found" (or something to that effect). Upon restarting, I again get "The disk you inserted was not readable by this computer".
Is there something I am doing wrong? What can I do to fix this, or prevent this from happening later?

Alias7 wrote:
"Disk Utility stopped verifying "disk2s1" because the following error was encountered: Filesystem verify or repair failed" In the details box, it says:
"Verifying and Repair volume "disk2s1"
Invalid node structure
Invalid B-tree node size
Invalid node structure
Invalid B-tree node size
Volume check failed.
Error: Filesystem verify or repair failed."
This is what the error message was before, and is what it is now.
You had these sorts of errors, then zeroed-out the drive, now you have them again?
There's only one conclusion: your drive is failing. They don't always just crash and burn.
Note that the volume name should be "Time Machine", but Disk Utility sees it as "disk2s1" for some reason.
That's it's internal name to OSX. Use +System Profiler+ (Apple menu, +About this Mac,+ then +More Info.+
Look in the sidebar for FireWire or USB (whichever it is), select it, and you'll see disk2s1 listed as BSD name.
Time Machine Buddy seems to freeze most of my other widgets (can't type in calculator, can't delete Time Machine Buddy). It doesn't seem to do anything either, It just sits there saying "Backup Status" and "Messages" but no messages, just "....".
That's not normal, if you've had a successful backup recently, or one currently in progress.
An earlier post had a similar problem, because somehow he didn't have permission to read his own system log. From the Finder menubar, select Go, then +Go to folder,+ then type /var/log
That should list, among other things, system.log Double-click it. If nothing shows in the center portion, post back and we'll fix it.
But your main problem is an unreliable drive.

Failed to repair Microsoft Visual C 2012 Redistributable Package (x64) when trying to download Photoshop CC, InDesign CC and Illustrator CC.

So I'm running Windows 8.1 on a laptop and I was installing updates to CS6 modules. It was successful in updating other apps but when I tried to update desktop apps Photoshop CC 2014, Illustrator CC 2014, and InDesign CC 2014 it stopped short saying it had failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). What do I need to do?

The Visual C++ 2012 Redistributable Package (x64) component of your operating system is damaged. You will need to reinstall it. You can find more information at Latest Supported Visual C++ Downloads.

Macbook pro will not restart after failed disk repair

This has happened twice in one week.
A routine disk verify was performed and returned errors. I reboot into the recovery drive and run disk utility. To validate the first finding, I run disk verify again. Same failure. Then I run repair disk. Disk repair fails. After this, the system will not boot. Now, even the disk utility 'sees' the main particitian, but it's grayed out. when i go to retore Lion, the main partition is not seen at all.
The kicker is that two different hard drives are involved. The first is a 500 gb Western Digital and the second is a 750 gb seagate. System is a mid-2009 MBP with 8gb ram.
I performed a full system backup this weekend but do not have it with me and will not have access to it until this weekend. Any help out there? Or am I just screwed?

Oh by the way, a mid-2009 MacBook Pro would not have 10.4.6. In fact it might not even have 10.6.4. 10.6.4 didn't get prebundled until June 15, 2010. So where you get 10.4.6 on your signature, that confused people as to what you really have.

HT1782 storage system fail or repair failed

Similar Messages

Maybe you are looking for