HT1789 ipod generation 5 does not work backlight

my ipodolution. 5 th generation backlight is not working.Help me for solution
THANKS

Hello Devendra dalal,
It sounds like your iPod Nano screen is not lighting up but the device appears to be on. If you have done the troubleshooting in the following article:
iPod nano (5th generation) Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/nano5gen/
I would next seek service for the device:
Service Answer Center - iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • HT4859 every time I try to restore my ipod it does not work...how come?

    every time I try to restore my ipod it does not work...how come?

    The only way to clear off the passcode is to restore the device.  You could always try the restore process on another computer that has iTunes just to get the iPod working again, then you could plug it back into your comptuer to sync all of his content back on the iPod.

  • My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

    My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

    Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

  • I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.

    Downgrading the iOS is not supported by Apple.Have yo tried:
    - Backing up and restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    - Go to the OverDrive support site

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • Brand new ipod touch does not work

    Brand new ipod does not work will not sync or power up.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Brand new IPOD touch does not work w Bose speaker docking station is there anything that needs to be done?. The Nano that I have works fine.

    My new Ipod touch is not working with my Bose Speaker docking station. My Nano works fine.
    Any reasons for this?

    Does Bose say it will work with your model iPod and iOS?
    Does it appear that the iPod fully seating in the dock?

  • Ipod 4g does not work with gps mount anymore, with iOS lower than 6.0.1 it worked

    After updating my iPod to iOS 6.0.1 and 6.1 my gps mount does not work anymore. It used to work perfectly.
    Have checked with a TomTom app if satelites are connected and it has good connection but navigation app does not work.
    All advices given in the community did not help so far.

    Have yo look here:
    TS1702 magellan External gps not...: Apple Support Communities
    after updating to iOS 6 gps signals are...: Apple Support Communities
    Otherwise I know of no solution.
    For the future just saying "All advices given in the community did not help so far." provides us with no information as to what that is.

  • HT1665 downloaded to 6.1.3 ipod touch does not work with previous working sound docks

    Downloaded 6.1.3 and IPOD does not work in previous working sound docks.  Cannot charge inthose docks now either.  They worked fine before download

    Reset the dock
    See if there is a firmware update available for the dock
    Sometimes tyhis works:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    Sometimes an iOS update breaks compatibility and y havet wair for a firmware/iOS  update

  • My new ipod nano does not  work when you turn off the computer

    I bought a new iPod but I have a problem when you turn off the computer does not work. Shows that the battery is full and it was lightning. Ipod only works while connected to your computer. What should I do

    Hello pepi95,
    And welcome to Apple Discussions!
    If you just bought the nano, why not bring it back for a replacement or your money back? It's definitely a defective iPod. Not much else for options here. Sorry.
    B-rock

  • Ipod touch does not work with hex from sharper image

    I just bought an ipod docking/speaker from sharper image (Hex) for my ipod touch.  My ipod does not work on it. I have also had problems playing my ipod touch music on ihome products - works on some but does not work on others. Is it my ipod touch. thanks.

    Some docks are not compatible with iOS 5. Ceeck with the manufacturer. Other users have post problems with iOS 5 and iHome docks too.

  • Macbook pro ipod nano does not work after plugging in

    I plugged in an iPod nano to my MacBook Pro which has two operating systems, one is OS and the other is Windows. I don't know which generation the iPod nano is. The PC side of the MacBook Pro is working but the OS side is not working. It allows me to login and then shows a blank white screen with the pointer cursor.
    The iPod nano was plugged in to add music from iTunes. I plugged it in, opened iTunes, and the iPod nano was not recognized on iTunes or on the computer in Finder. I unplugged the iPod nano and closed iTunes. When I opened iTunes again, it gave me an error and will not open iTunes again. I restarted the computer and this is when the OS side stopped working and the PC side continued to work. I was able to load OS in Safe Mode though.
    Does anyone have any suggestions? Please help. Thanks!

    I had the same issue...of course i went swimming with my iPod but still. If it is the battery that is giving you trouble then go back to your local apple store or call them. Ask what the most reliable place for iPod repair is. A second option (what I did) is to go into the iPod recycle program. They take your old iPod and either give you a discount on the new one of the same style or a discount on a new one of the 3rd gen. I recomend the first option if your iPod is unused.

  • Ipod shuffle does not work

    Hi All,
    I pull my ipod shuffle with out doing "Safely Remove Hardware" so now when i connect my ipod shuffle to my USB my computer does read it. it still charge and i ipod shuffle still work and everything, but my computer does not read the ipod so i can go in to Itunes and change my music....please help, i'm sick of listing to the same music

    You will probably have to Restore it, which should fix you up along with getting rid of all of your by-now boring music. Follow the instructions you find via the iPod Shuffle Support Page

Maybe you are looking for