HT1820 how do you restore the hard drive with install cd after zeroing out all files? when i try to boot install disk or from usb a kernel panic screen appears telling me to restart my computer.

everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?

You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Similar Messages

  • How can I restore the hard drive to an earlier date

    I was wondering if there is a way to restore my computer to factory defaults like when I received my iMac, without a disk? I think it needs a good cleaning. It is running very slow and my web browsers keep freezing as well as skype. It doesn't matter which browser I use either.
    Please direct me how to if possible.

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • How do you confirm the hard drive speed

    I am trying to confirm my hard drive speed.  I have looked at "about this mac" but can't seem to find it.  New MBP 15 inch running Lion

    found it.
    About this mac, more info, system report, serial-ATA, then scroll down to the nformation about the apple HDD, and there it is under "rotational rate"

  • How do you clone a hard drive with boot camp?

    My daughter got a new 13" Macbook pro in July.  She is still running Lion.  Se started to exerience system freezes.  She called Applye support which had her reset the PRAM(?).  The the system would no longer boot.  When she went away to college, I sent her off with an external usb drive partitioned for Tme Machine and also with a partition of a copy of her system from that date.  She was able to boot into that and continue her work.  The internal hard drive did not show up as a boot option, but was accessible one she had booted to the external drive.  This morning the internal drive was an option when she did the boot to external.  My son had a similar situation a few years ago with a Mac mini and it turned out to be a failing internal hard drive.  We have decided to continue from the external HD until she comes home for Thanksgiving and can go to the local Apple store.  In addition to OSX she also has bootcamp with Windows 7.  Now to my question.  Is there a way to clone her internal hard drive including the Windows bootcamp?  I would like to create a clone we can use for a restore as we expect the internal drive will be replaced.  Time Machine can replce the OSX system, but I am thinking if we can do an exact copy of the internal drive, then we would not have to reinstall or recover the Windows system.  Any ideas?  Would Carbon Copy or Super Duper work better?  I believe one of them has a family license so that I could use it for the other kids cloning as well. 

    You can't clone the entire drive. You can clone the OS X partition and the Windows partition separately.
    Cloning OS X should be done with Disk Utility or Carbon Copy Cloner. The Windows volume can be cloned using Windows software, Winclone 3.5, or Volume Snapshot.

  • How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    How can I completely wipe the hard drive with out the Mac OS X disc? I don't need any of the info on the computer.

    You can't unless you have a bootable system on an external drive you can use. Otherwise, you need either the original disc that came with your computer or a retail copy of Snow Leopard DVD. The latter contains 10.6.3, so your model must be capable of booting from that or an earlier version of OS X.
    You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • How do you put your hard drive from an old computer to your new mac?

    how do you put your hard drive from an old computer to your new mac?
    i want to get the pictures, etc off of my old mac onto my new mac desktop. how can i do this?

    You don't.
    How to use Migration Assistant:
    http://support.apple.com/kb/HT4889?viewlocale=en_US
    http://support.apple.com/kb/HT4413?viewlocale=en_US
    http://support.apple.com/kb/TS1963
    Troubleshooting Firewire target disk mode:
    http://support.apple.com/kb/HT1661

  • Restore the hard drive to the factory WinXP OS image - T60 1951-A31

    I'm trying to restore the hard drive to the factory WinXP OS image on a number of 1951-A31 ThinkPad T60. 
    Found these instructions in the trouble shooting guide:
    1. If possible, save all your files and shut down your operating system.
    2. Turn off your computer for at least 5 seconds.
    3. Turn on your computer. Watch the display carefully. While the message, “To interrupt normal startup, press the blue ThinkVantage button” is displayed, press the ThinkVantage button. The Rescue and Recovery workspace opens.
    4. Click Restore your system and follow the instructions on the screen.
    The problem is that Restore your system does not appear.
    I found a thread on Thinkvantage  looks promising:  No Restore Option
    The thread has this:
    04-03-2009 12:55 PM
    kamszelei, welcome to the forum,
    from a lurker 
    which version of Think Vantage System Upate do you have installed?
    If you have version 3.13.0009 installed please try the following; boot into Windows and run TVSU.  It'll update itself, restart, then update itself again. Hopefully the option to recover to factory content will then be available to you.
    Please also check the following registry key; HKLM\Software\Lenovo\TVT Common
    If the "System Type" key is 1, change it to 0. If it is already set to 0 don't change anything and let us know
    Unfortunately my Thinkvantage update system is saying it cannot connect because it is not running
    Here are my questions about ThinkVantage:
    How do I get Thinkvantage update to run?
    How do I find the version number for Thinkvantage
    How do I "boot into Windows and run TVSU
    My other question is this:
    Can I simply buy the backup DVDs with the original XP?
    Thanks
    (mod edit: fixed broken link)

    You need to have a harddrive installed that contains the original system restore partition, many people delete them because they are redundant and use up space and after a while, most of the content is outdated, meaning it will install 4-5yo system and software that you'd only want to replace or update anyway. I prefer to install from a windows setup disc, but you can buy the restore sets, it's a set of 7 or 8 CDrom, not DVD discs. Lenovo sells them I believe, or if you can find someone willing to copy a set and send them to you, it would save you some money. I can tell you that if I had a several of these to do, I'd much rather use a single windows setup disc, preferably one with the latest service pack and updates, so I'm done after a few mins and one disc, opposed to installing many discs, changing from one to the other, then in the end downloading and installing service pack three, then a few dozen hotfixes, it could turn into hours of work on each unit, but if you want them with all the preloaded software, then that is the only way. Good Luck
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • I have lost my external drive on desk top.  How do you remount the external drive

    I have lost my external drive from iMac desk top.  How do you remount the external drive?
    WindyCityNorth

    Kappy Thanks for help..  I had already tried the Disk Utility but external drive did not show.  What worked was to shut down every thing and shut off power to all.  Disconnect power to the external drive.  Connected power to computer and then restarted the computer.  After the computer was up and running, I reconnected power to external drive and then turn it on.  At this point the external drive returned to my desk top

  • With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

    I plan on buying a used iMac with a Core 2 Duo so that I can run Lion.  Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software.  How can I do this without a DVD with the OS on it like I have for Snow Leapard.  I suppose that I could boot from my Snow Leapard DVD and do the erase.  Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again.  But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
    -- Kaydell

    When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
    FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

  • How can I remove the hard drive from an iMac g4 before recycling it?

    How can I remove the hard drive from an iMac g4 before recycling it?

    There are take-apart guides online.  For example
    http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
    However, you can also consider securely erasing the hard drive instead.  You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive.  If this is a viable option, please post back (include Mac OS X version on installation disc).

  • How do you know a hard drive is bad?

    how do you know a hard drive is bad?

    From the OS X "Help" system:
    Check whether a disk is about to fail
    You can check the health of many disks in Disk Utility. Many disks include Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) hardware, which lets a disk test itself for potential problems.
    Open Disk Utility.
    Select the disk in the list at the left.
    If you see a message saying the disk has a fatal hardware error, the disk has an irreparable hardware problem that can’t be fixed by Disk Utility or any other utility that repairs software problems. Back up as much of the data on the disk as possible, and then replace the disk.
    If you don’t see a message saying the disk has a hardware error but you still have problems with the disk, you can try to repair it with Disk Utility.

  • I have a MacPro with two 1T hard drives. How do I access the hard drive that is not the start-up drive?

    I purchased a MacPro and upgraded to 2 1T hard drives.  How do I access the hard drive that is not the start-up drive?

    Have you formatted these new drives yet with Disk Utility?  That is the first step.
    Once they are formatted, if you want to see them on your desktop open the Finder preferences, General, and clock the checkbox that says "Show these items on the desktop" for the hard disks.  If that preference was already set you should see the drives appear after they are formatted.  Then they are there for you to use as you wish.

  • I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  • How do I format the hard drive on my Imac without losing the applications etc?

    I am fairly new to mac computers. and was wondering if there is anyone out there who could help. I have an Imac running Snow Leopard which is becoming very slow in starting up. I want to format the hard drive but still want to retain the applications etc already on the Imac. Can I just time machine the computer then insert thte OS disk which will format the hard drive? Will this give me a better start up time?
    Many thanks in advance.

    If you format the hard drive, you'll lose all your data. You can make a Time Machine backup, format the disk and restore from the backup only what you need

Maybe you are looking for