HT1846 My iMac 24" is mid 2008 and I have just instaled Win7 Pro 64 bits. All went well execpt...
Hello everybody,
My iMac 24" is mid 2008 and I have just instaled Win7 Pro 64 bits. The windows installation went very well, except wen I starte to use the Boot Camp CD for the drivers and then I have this error "Boot Camp x64 is unsupporteded..." So I had to instal everything in the CD one by one and went quite well. The only thing that I can not install is the Boot Camp itself! So I do not have any windows control over the Boot Camp. How can I solve this issue?
Thanks
Follow the steps in this guide...
http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang= en
Then install the following Bootcamp Updates:
BootCamp 3.2 Update 64-bit
BootCamp 3.3 Update
Hope this helps!
Message was edited by: vea1083
Similar Messages
-
I'm Using Windows 8.1 and I have just installed Creative Cloud Desktop but whenever I attempt to log in it then signs me out
I have tried logging in and out and reinstalling but still fails to sign me incontact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turned on off iPad and iPhone but neither will set up, I have given up and forwarded all new emails from hotmail to icloud until I sort this out. Please help it's doing my brain in!!!! Thanks
You need to turn off find my ipad in settings
Then restore to factory settings ipad will then be
as new then enter you Apple ID and password
bsydd uk -
The question is written above. Please answer it and if this is the new way lists are going to appear, I'd rather go back to the old Firefox
The question is written above. Please answer it and if this is the new way lists are going to appear, I'd rather go back to the old Firefox
-
I have just installed Qicltime Pro but when I edit a video file and try to set the In and Out points, it does not show any way to set them. It trims the video down to the one point on display. Have I installed the software correctly?
QuickTime Player 7 Pro is in the Utilities folder.
To set in and out points set the position you want in the timeline and tap the i key. Move to the end of your selection and tap the o key. To step frame by frame move the playhead by tapping the left/right arrow keys. -
Problems installing OS
I have an iMac 21.5 (mid-2010) and I'm trying to install a new hard drive. When I choose the installation disk the Apple logo comes up and it stops there. Then the mouse and keyboard goes dead. I'm trying to install 10.6. Any help would be appreciated. ThanksSince you have a new hard drive, there is nothing on it, so you need to boot from an external source (and probably format the hard drive before installing an OS). Are you booting from the 10.6 install disk? Better yet - do you have a bootable backup clone or at least a Time Machine backup?
-
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.
Hello, not certain, but turn the Camera onto Play if it has such a setting, does it show up in iMovie then?
-
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly. -
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated. -
Converted to Crystal Reports 2008 and now have an issue with deployment
Post Author: lwager
CA Forum: Deployment
I have converted my application to Crystal reports 2008 and I have that as a prerequisite in my set up program but everytime I try to install the software package on the client's machine I get this error when it is trying to install Crystal Reports
Verifying file integrity of C:\DOCUME1\lauriew\LOCALS1\Temp\VSD1B7B.tmp\CrystalReports 12.0\CRRuntime_12_0_mlb.msiWinVerifyTrust returned 0File trustedError: Setup has detected that the file 'C:\DOCUME1\lauriew\LOCALS1\Temp\VSD1B7B.tmp\CrystalReports 12.0\CRRuntime_12_0_mlb.msi' has changed since it was initially published.
Does anyone know why I am getting this error? Thanks in advance for your help.I'm having the same problem ! Can someone help me with this problem ????
-
My iMessage freezes mid-typing and I have to restart phone to unfreeze it
My iMessage freezes mid-typing, and I have to restart my iPhone 4s to get it working again. What is happening and what do I do?
Hello cconklinhmb,
Thanks for the question. After reviewing your post, it sounds like one app is freezing. It looks like you have already done some troubleshooting. Since this is a pre installed app and you have already restarted the iPhone. I would recommend that you read this article, it may be able to help the issue.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?
iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications
-
I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.
https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…
-
I had an iPhone 4, and I have just gotten an iPhone 5. How do I restore all of my content and settings from iCloud. The sales lady skipped through that option when she "set up" my phone...
When you go through Setup Assistant on a new iOS device, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose from which backup to restore.
Learn how to replace your current iPhone, iPad, or iPod touch with a newly purchased iOS device. http://support.apple.com/kb/HT2109
Maybe you are looking for
-
Contacts in address book do not show in iCloud
I have set up the iCloud and got Calendar working fine. Contacts don't. When I merge contacts from iCloud they don't upload and disappear from my Address Book in my iMac ( I have a back up so I ca restore them....). I tried several times but no resul
-
Splitting of dimensions into two applications
Dear all, I've come across an artical in SDN says" The Application could be split into two applications POC_APP5 and POC_APP6 with less number of dimensions to expand. In turn would improve the performance of Input schedule and Reports." Could you ki
-
My keyboard is located @1 inch above the bottom of my screen. For most things this is ok. But on my notes utility, it's in the way. I can't see what I'm typing behind it and cannot move the note up or downtown seeing. Is there a way to move the keybo
-
What drive size max for K7N Pro
I downloaded the pdf manual but I could not figure out what the max drive size is the K7N Pro can access. My Bios version is 2.4 and I want to buy/use a Hitachi 180GB hard drive. I was told my controller must support 48bit access and I wonder if the
-
Why is my printer printing one or a few lines of garble, rather than the page I am trying to print? HP Photosmart C4150 Windows 7 64-bit