HT1848 Upgrading iPad from 4.3.3 to 5.1 and retaining bookmarks
I have an iPad running OS 4.3.3 and I want to upgrade to 5.1. Can I retain my bookmarks and how do I backup my music?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom
Similar Messages
-
How do I stop my wife's iPad from receiving all of my texts to and from my iPhone. I ready to scrap all things apple
You could create the new Apple ID for her and keep the existing one for you.
If you need/want to keep the same ID, perhaps this article will help: http://support.apple.com/kb/HT5538
~Lyssa -
trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download. could anyone have a suggestion of a possible solution? Thx
trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
hi, i have to reset an ipad from work which belonged to another employee. It says on the screen that it is disabled and connect to itunes but when i try to connect it says error i need the passcode, can anyone help?
You have to use recovery mode which will totally erase the iPad. Read here.
iPad: Unable to update or restore - Support - Apple -
Upgrading APEX from 3.2 to 4.0 images and buttons not displaying correctly
Database 11.2.0.1
APEX: 3.2.1
Attemping to upgrade APEX from 3.2 to 4.0. The installation script runs fine and updates the database successfully. I run the .sql to import the images and it ran successfully however when I attempt to access the APEX home page, the images are not loaded and the buttons don't do anything. I did some research through google but did not come to anything that resolved my issue. Does anyone have any ideas?
Thanks for your time...If you are using mod_plsql, you need to run @apxldimg.sql script with SYS user file present with Apex installation. Also provide the location of your apex folder as parameter to this script.
Habib -
I was trying to update my husbands ipad from ituns. Now it has my information. How do I get his info back?
If you have a backup of your husband's device then restore it from that
-
HT4759 Can I find my stollen iPad from my iPhone I have the serial and IME #
Stolen ME033/A iPad mini Wi-Fi Cell 16GB White-ATT
Model 1454
Serial # F7*******19F
How can I find this with my iPhone ? I had a password to lock it. Is it easy to unlock?
Can Apple track it by the phone # ?
<Edited by Host>What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
Find My Mac can be used from Find My Phone at iCloud.com and via Find
My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0
9. Prey 0.6.2 -
How do I change the email and account info on my new iPad from the old user to me?
Restore the iPad to out of the box configuration. This will erase all contents/settings on the iPad. Then set up using your ID and email info.
Troubleshoot Your iPad: Restore
http://www.dummies.com/how-to/content/troubleshoot-your-ipad-restore.html
Cheers, Tom -
Problem upgrading iPad from iOS 4.2 to 4.3....
Before I start, I can confirm that I have successfully upgraded my iPhone4 from 4.2 to 4.3.
In regard to the iPad, when I click on the 'Check for update' button in my iTunes device summary page, it states that 4.2 is the 'Current Version', even though I know that iOS 4.3 is available. Therefore to try and force an update I selected the 'Restore' option in the same summary page and it prompts me if I am sure that I want to restore etc... which I confirm with the RESTORE, then I get an error message of _'There was a problem with downloading the software for the iPad "iPad". The requested resource was not found.'_
Anyone have any ideas how to get around this issue, or why iTunes is telling me that 4.2 is the latest version.
Thanks in advance.here's a tip from another thread http://discussions.apple.com/thread.jspa?threadID=2777490&tstart=0
-
How do I get the latest software om the device? The software upgrade button does not show ios6 as available. It shows ios5 as current.
The first generation iPad is incapable of running iOS 6.
(88422) -
Problema to upgrade iPad from 4.3.5 to 5.0.1
I tried several times to upgrade from 4.3.5 to 5.0.1 , but at the time finished download(732.1 mb) respond with the error that i have to check my network setting, i don't see any wrong with the net, any clue? But anyway according the document is not so critical to upgrade except for the battery life improvement
No, I didn´t , I´ll try disabling firewall my Kasperski
thank you -
I am having challenges streaming movies from my Mac Mini to my IPAD 3, the movie will load (after what seems a bit too long) and start to play. It then stops after 30-50 seconds and if I leave will start again, but repeat the start stop thing. Its almost like it stops to buffer than starts again. I have had the same issue appear wiht my Iphone 5.
Thoughts?Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
Upgrade path from old version of LabWin 3.1 and NIDAQ to WinXP system
Hello, I am trying to help folks at my old university lab recover from a Win95 PC failure with an old version of LabWindows, 3.1 (ca.~1997).
They have a WinXP PC and have installed the old 3.1 software on this PC. My old projects will compile and mostly run, but they are having problems finding a version of legacy NIDAQ that will work in LabWin 3.1 and WinXP. Function calls simply return errors so far, although I suspect they may not have configured the DIO-48 card in NIDAQ yet and the version of NIDAQ they have may not have legacy support for the "easyio" library.
Does anyone have experience with this? If it is simply not possible, the second path is to have them buy LabWin2010, but I do not know whether the NI libraries (other than easyio which is easy enough to swap for std NIDAQ fcn calls) have changed significantly and will require a large code rewrite for the GUI or other NI libs. Third option is to simply install Win95 if they can find disks, and use teh very old NIDAQ on the old PC.
AlexHi Alex,
I have not seen this exact situation before, but I would be happy to help you out to find what you need. Can you tell me a little bit more about your setup? From what I understand, you have an old program written in LabWindows 3.1 and a DIO-48 card. Are there any other pieces of software or hardware in your setup? It looks like the version of traditionalDAQ you need is 4.9 or lower. Do you know what exact version you had been using? I have sent you a private message to get your email address so that I can send you this driver.
Regards,
Andrew M.
Applications Engineer
National Instruments -
I updated my ipad from 5.1 to 5.1.1 and does it delete everything ?
I disconnected my ipad 1 cause i though it was gonna delete everything and it did . i have icloud too and i had 1,100 some pics in my ipad. did icloud saved those pictures ? thats the only thing im asking thanks :/
and i have imessage too did that saved my messages too ?If you had backed up your iPad then yes
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT1414 -
I wanted to upgrade ipod from 4.x til newest ios. And then the trouble startet
It didn´t work out, my pc displayed an error (usbaapl.) and now my ipod is unable to connect to Itunes. It only displays the USB wire, an arrow and Itunes ikon. What should I do ?
What was the exact wording of the error message?
Without knowing that:
- Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try disabling the computer's antivirus and firewall.
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe you are looking for
-
I have simple question. I am trying to create new partition of 25GB from Disk Utility but each time it given me this error: "Partition failed with the error: No space left on device" Why this error occurs?
-
More photos than wanted when iPad synch
Old iPad 1, wife owns and uses it. She never synched before yesterday. She has no PC. I have PC and iPhone 4s. She had no iTunes account nor did she have an iCloud account. iPad 1 was set up with my iTunes account so she could buy books and buy a
-
Not getting right string format from textarea
hello i am asking this question again sorry but i am facing another issue? actually i am not getting right text from textarea when i type in textarea in language other than english and run it prints text of text area it prints ? marks so i think its
-
FF4 final running on Win Vista 32bit. FF 3.6.15 was faster and completely stable as is my OS. With FF4, opening a new tab usually causes the screen to black out very briefly, and then sometimes (not always) totally lock up - even when it's an empty t
-
I have mac book OS X 10.4.11 model No.A1181 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?