HT1849 My album is not showing all the songs...
A few weeks ago I bought three songs from an album that was not yet released. Now the album is released I bought the rest of the songs. The price was discounted because of the ones I had bought. But, on my Album page in music, in the album, the previously purchased songs are not shown on the album. It only shows the other songs. Can somone help?
Hmm... Looks like you're still struggling with iTunes's native built-in Playlists. In most cases, these are "smart" playlists that will "automatically" put your songs into them if the songs match the requirement.
Solutions:
1) Delete these Playlists. All they do is just give you a head start to create "your own" unique playlists.
2) Hate to say but delete all the songs from your newly buy CD. No problem, you can sync them into your iTunes again later.
3) Now create your own playlist. You know what to do (I suppose).
4) Organize/drag your selected songs into the playlist you made.
5) Volla!
Good luck manage your favorite tunes! ^_^
Similar Messages
-
HT1849 My "completed album" is not showing all the songs I purchased.
I "completed my album" and it downloaded the songs I did not yet have. But the songs that the iTunes store says I have already purchased are in an EP and they are not showing up as part of the full length album. How can I get them to list in the full length without taking them out of the EP that already exists. I don't want to have repurchase those songs just to get them to list twice.
The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements. (These are upgrades, as opposed to the updates which you get from Software Update.)
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further. -
Ipod does not show all the songs...
Hi, I bought a new Ipod G5, I put the songs in the iPod but some artists when you select it, it just go directly to one of their albums without showing any other songs, and when i plug it on the computer, iTunes shows all that all the songs are in there, but the iPod it just not showing them, what's going on?
Hi i found that if you go into the ipod options in itunes (Ipod must be connected), click on the advanced tabthere is a box you can check that says "keep itunes music organized"
i checked this the updated my ipod all 60011 song show under artist now without having to put an album in every song-which by the way is waaaaaay annoying when you have over 3000 songs without an album. hope this works for you -
Album art not showing all the time
Is there a way to keep the album artwork to consistently show up? It seems like everytime I go into the music section, there's artwork missing...even though it's all there in iTunes and I sync it every time.
If you are only adding it to one song, that won't work. Itunes itself does this for artwork that it finds automatically, but if you want to add them yourself you have to add the artwork to every track. Find the track that you added the artwork to copy the artwork using command - C , then select all of the tracks at the same time in itunes, do a get info and paste the artwork into the artwork window of the tagging window.
-
Photos album does not show all the camera roll behind the label album
tap on photos icon, albums will be shown i.e camera roll and photo laibrary. In my case the camera roll was hiding behind the label albums. What i mean is the page was not fully shown.
http://support.apple.com/kb/TS3804
-
I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
BI publisher report is not showing all the data
Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.KalidossHi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks. -
In solution manager system not showing all the system in SLD
Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
RegardsThanks for reply
it is not showing all the systems -
ALV not showing all the rows! Please help!
Hi Experts,
I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
I have coded like this:
lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopaldid you somehow manage to set the "first visible row" property on table object
to 2. Only thing I can think of that could cause this effect.
Cheers
Phil -
Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801 -
Apple mail not showing all the messages?
In Apple mail, for my icloud account, I have some mailboxes which show the wrong number of messages, it shows too few.
As an example, a mailbox contains 150 messages, but apple mail reports there are only 146.
I rebuilt the mailbox and let apple mail do its thing. In the activity window I can see there are 150 messages. Yet, once apple mail has finished rebuilding the mailbox, it still tells me there are 146 messages. What's going wrong? Why would apple mail not show all the messages while in the activity window it clearly shows it knows there are 150?Solved!
This was too weird to be real. Apple mail does not show messages it believes to be duplicates, and buy, does it make big mistakes in deciding what are duplicate messages and what not! Some of my mailboxes had over 100 "duplicates" not showing according to apple mail.
I found a solution thanks to this topic:
https://discussions.apple.com/message/18265121#18265121
defaults delete com.apple.mail AlwaysShowDuplicates
does yield an error in 10.8.2 ( Domain (com.apple.mail) not found. Defaults have not been changed. )
defaults write com.apple.mail AlwaysShowDuplicates -bool true
Does work brilliantly though! -
Vertical scrollbar not showing all the records when I scroll down.
Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size 0
- Number of Records Buffered 0
* Number of Records Displayed 60
* Query All Records No
- Record Orientation Vertical
* Single Record No
- Database Data Block Yes
- Enforce Primary Key No
- Query Allowed Yes
- Query Data Source Type Table
* Query Data Source Name WORK_CATEGORY
* Query Data Source Columns
* Column Name JOB_TYPE
* Column Type VARCHAR2
- Column Type Name
- Parent Column
* Length 30
* Precision 0
* Scale 0
* Mandatory Yes
* Column Name WORK_CATEGORY
* Column Type VARCHAR2
- Column Type Name
- Parent Column
* Length 30
* Precision 0
* Scale 0
* Mandatory Yes
- Query Data Source Arguments
- Alias
- Include REF Item No
* WHERE Clause
* ORDER BY Clause job_type
- Optimizer Hint
- Insert Allowed Yes
- Update Allowed Yes
- Locking Mode Automatic
- Delete Allowed Yes
- Key Mode Automatic
- Update Changed Columns Only No
- Enforce Column Security No
- Maximum Query Time 0
* Maximum Records Fetched 0
- DML Data Target Type Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AMOne of the items is a list item.. here are it's properties:
* Name JOB_TYPE
* Item Type List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled Yes
* Elements in List
* Label
* List Item Value LIST20
* List Style Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction Mixed
- Popup Menu
- Keyboard Navigable Yes
- Mouse Navigate Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type Char
- Data Length Semantics Null
- Maximum Length 30
- Initial Value
* Required Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode None
- Formula
- Summary Function None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records 0
* Number of Items Displayed 15
- Database Item Yes
* Column Name JOB_TYPE
- Primary Key No
- Query Only No
- Query Allowed Yes
- Insert Allowed Yes
- Update Allowed Yes
- Update Only if NULL No
- Visible Yes
* Canvas CANVAS2
- Tab Page
* X Position 47
* Y Position 137
* Width 187
* Height 18
- Visual Attribute Group DEFAULT
- Prompt Visual Attribute Group DEFAULT
- Foreground Color
* Background Color white
- Fill Pattern
- Font
* Font Name Tahoma
* Font Size 10
* Font Weight Demilight
* Font Style Plain
* Font Spacing Normal
* Prompt Job Type
- Prompt Display Style First Record
* Prompt Justification Start
* Prompt Attachment Edge Top
- Prompt Alignment Start
* Prompt Attachment Offset 10
* Prompt Alignment Offset 0
- Prompt Reading Order Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name Tahoma
* Prompt Font Size 10
* Prompt Font Weight Bold
* Prompt Font Style Plain
* Prompt Font Spacing Normal
- Hint
- Display Hint Automatically No
- Tooltip
- Tooltip Visual Attribute Group
- Direction Default
- Initial Keyboard State Default
- Keyboard State Any
-
Process Chain got struck and not showing all the variants in the log view
Hi,
We have some process chains which are running daily.The problem here is that one of the process chains got struck at some point
and it is not showing all the variants in the log view but able to see in planning view.
Could any one please let me know why this is occuring.Hi Ramanjaneyulu,
Thanks for the reply.
As you said,i clicked on the 'display message' but it is not showing any errors.It is showing
that the process completed successfully.
Thanks. -
The library module in 4.3 version does not show all the images
The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do? Get this fixed now!!!!!!!!
My bet would be on a corrupt preview folder.
Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews. See if that fixes it.
If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html -
Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.
See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190
Maybe you are looking for
-
I've been using a charger I bought off of eBay for cheap because the one I received with my iPod had stopped working, so instead of paying for a new Apple cord, I went with the cheaper option. It has been working fine up until today. I updated my iPo
-
Personal File Sharing + FileVault = Problems?
Hello, sorry my poor english. I have enabled 'Personal File Sharing' and I have a small index.html file on my 'Sites' folder. When I try to check my webpage using the supplied link... http://localhost/~MyUserName/ I get this error (403 Forbidden): Yo
-
HT4527 transfer i-tunes from my PC to an external drive
My PC is using about 20g for just i-tunes and I need to i-tunes to an external drive but still usable on this computer how do I do this? By the way I really need this to be dummy proof since the one time that I did try this it just duplicted it and e
-
Does a weblogic.jar exist for client
Hello, does a weblogic.jar exist for client, that is not so big? thanks, dorin
-
I am having problems to show dynamic logo's. It seems that XMLP doesn't pick up the value of my fieldname. If i use the the following syntax. It works fine..... url:{contact ('${OA_MEDIA}','/','LOGO_243.gif')} However when i use : url:{contact ('${OA