HT1899 Boot Camp was deleted... How to download and install again?
My Boot Camp was deleted from aplications. I downloaded it again from apple.com but I dont know how to install it since it's an .exe file... Please help me...
Bootcamp Assistant is in your utilities folder. It is part of OSx. It is not downloaded.
I don't know what you downloaded that is a .exe file but .exe files are Windows executable files not OSx install files.Perhaps you downloaded the Windows Support software. If so, these are the Windows drivers that are run from within Windows. Be more specific about what you downloaded.
Similar Messages
-
How to download and install webutil in FORMS 10G 10.1.2.0.2
Where i find all the step to
how to download and install webutil in FORMS 10G 10.1.2.0.2
i DON'T FIND NOTHING OF VERY GOOD TO FOLLOW !!!hi
u do not need to install any webutil in R2 u just need to configure few things.
please read the following notes and try to configure.
How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
Solution
Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
here are steps to get a small test form running, using WebUtil 1.06.
Note: [OraHome] is used as an alias for your real oDS ORACLE_HOME.
Feel free to copy this note to a text editor, and do a global find/replace on
[OraHome] with your actual value (no trailing slash). Then it is easy to
copy/paste actual commands to be executed from the note copy.
1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
2) Copy or move jacob.jar and jacob.dll
[JacobStage] is the folder where you extracted Jacob, and will end in ...\jacob_18
cd [JacobStage]
copy jacob.jar [OraHome]\forms\java\.
copy jacob.dll [OraHome]\forms\webutil\.
The Jacob staging area is no longer needed, and may be deleted.
3) Sign frmwebutil.jar and jacob.jar
Open a DOS command prompt.
Add [OraHome]\jdk\bin to the PATH:
set PATH=[OraHome]\jdk\bin;%PATH%
Sign the files, and check the output for success:
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\frmwebutil.jar
[OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
you may skip this step. Otherwise,
Create a schema to hold the WebUtil stored code, and privileges needed to
connect and create a stored package. Schema name "WEBUTIL" is recommended
for no reason other than consistency over the user base.
Open [OraHome]\forms\create_webutil_db.sql in a text editor, and delete or comment
out the EXIT statement, to be able to see whether the objects were created witout
errors.
Start SQL*Plus as SYSTEM, and issue:
CREATE USER webutil IDENTIFIED BY [password]
DEFAULT TABLESPACE users
TEMPORARY TABLESPACE temp;
GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
CONNECT webutil/[password]@[connectstring]
@[OraHome]\forms\create_webutil_db.sql
-- Inspect SQL*Plus output for errors, and then
CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
Reconnect as SYSTEM, and issue:
grant execute on webutil_db to public;
5) Modify [OraHome]\forms\server\default.env, and append [OraHome]\jdk\jre\lib\rt.jar
to the CLASSPATH entry.
6) Start the OC4J instance
7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
It is important to generate the PLX, to avoid the FRM-40039 discussed in
Note 303682.1
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
8) Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Add an ON-LOGON trigger with the code
NULL;
to avoid having to connect to an RDBMS (optional).
Create a new button on a new canvas, with the code
show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
http://server:port/forms/frmservlet?config=webutil
10) Run your form. -
How to download and install all drivers on my laptop..plz help
how to download and install all drivers on my laptop..plz helpthe pre installed OS was ubuntu but now i havve installed Windows 7 64 bit...i m not able to use internet through ethernet,my wifi is not working..and many such problems related to drivers.
How did you post this? Download the drivers to a memory stick. See Paul_Tikannen's post here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/windows-7-drivers-for-hp-1000-1336TU-notebook/td-p/4852732
-
Hi, Just want to check how to download and install adobe
Hi, Just want to check how to download and install adobe
Download and Installation Help -
https://helpx.adobe.com/download-install.html
If you cannot find helpful information thru that link then you will have to be more specific, "adobe" is not a name of any specific software. -
How to download and install ringback tones on my 5s
how to download and install ring back tones on my 5s
I would love for you to have ring back tones on Iphone 5s! Here is where you can purchase and manage your ring back tones: http://vz.to/15Jto4u
AmberF_VZW
Follow us on Twitter @VZWSupport -
After I purchased pselements 12 and premiere elements 12 I downloaded and installed pselements 12 but I cannot find how to download and install premiere elements 12 because that window has disappeared and I can't get back to it. How do I download and install premiere elements 12? where is it? how can I find it?
rachif
I am assuming that the purchase and download is from Adobe. You should find the information that you seek under My Orders at http://www.adobe.com after you sign in (as per John's link).
However, if you have difficulties in going that route, please contact Adobe via Adobe Chat to discuss your order under the topic of Orders, Refunds, and Exchanges. To do that, click on the following link, and, when it opens, make sure that the topic is set at "Orders, Refunds, and Exchanges", click on the statement "Still need help? Contact us." to bring up the Adobe Chat.
Contact Customer Care
Please let us know the outcome.
Thank you.
ATR -
How to download and install ios8 in iphone 5s
I revcieved a software update ios8 and when i was looking for,to download and install,the process could not be accessed despite turning on the wifi network.kindly assisst... Dr prince
Turn on computer, open iTunes, connect iPhone, update iPhone.
-
How to Download and Install IBM Jcop
http://www.nfc-development.org/2007/01/how-to-download-and-install-ibm-jcop.html
This is an excellent site for Java Card newbie.
It points to the correct IBM site for Jcop software tools.
Once it is successfully installed, you can find the user guide in doc,zip file under the directory \eclipse\com.ibm.bluez.jcop.eclipse_3.1.1.b
Kindly provide feedback if you have obtained the activation code from IBM from the instructions as I do not need one at the moment.
JohnOr try this one:
http://www.usasmartcard.com/java-card/java-card/jcop-tool-install-guide.html
And order your JCOP card with codes from the same place... -
Hello, actully i didant find any camera in my ipad 4, so how to download and install it?
I am guessing you mean the Camera software icon. There are front and rear hardware cameras on your iPad if indeed is an iPad 4.
See this figure. The camera icon looks like the one in the upper right. If you don't see it, try Settings > General > Reset > Rest Home Screen Layout -
How do download and install firefox from redhat command prompt step by step with commands
How do download and install firefox from redhat 6 command prompt
Im new to Linux so would appreciate step by step details with commandsIs your Windows Vista 32 or 64 bit?
To find out if your computer is running 32-bit or 64-bit Windows, do the following:
Open System by clicking the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking System.
Under System, you can view the system type. -
How to download and install BluePrints AJAX Components
Good Day
Pls I need serious help on how to download and install BluePrints AJAX Components out side the update center embedded within the netbeans 5.5 ide because i can't connect to the internet from within the IDE.Pls can anyone help me pls help me.I would love for you to have ring back tones on Iphone 5s! Here is where you can purchase and manage your ring back tones: http://vz.to/15Jto4u
AmberF_VZW
Follow us on Twitter @VZWSupport -
I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to.. When I've tried to download and install again it says that the "Object Already Exists." It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.
cactisken
You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
Can you still use 12/12.1 on this same computer that will not let you use 13?
What specific Window operating system are you using?
Let us go through the usual drill...
1. Does the problem exist with and without the antivirus and firewall(s) disabled?
2. Are you using a pen and tablet device instead of a mouse?
3. Did you install the program with antivirus and firewall(s) disabled?
4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
from SLCache to SLCacheOLD.
5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
computer as Premiere Elements 13?
Let us start here and then decide what next.
Thank you.
ATR -
How to download and install 64 bit trial applications?
Hi all,
I'm trying to download and install Adobe trial applications (Dreamweaver CS6, Photoshop CS6, CfBuilder) on a Windows 7 64 bit.
When I choosed the file to download, it did not show me a 32bit and 64 bit version of the application, so I thought it was same installer for both..
But now when the installation starts, it show me that it will install in x86 folder.
Is it ok? 64bit application installed in x86 folder....
Or do I have to re-download the installer? And how can I download the 64 bit version?
And if the installer is the same, how can I force it to install the 64 bit version of the application?
Something that could be related with this problem: I have a very old Adobe account and before I was using a 32bit workstation....maybe the installer is so stupid that he "remember" this?
Thank in advance for any suggestion
ByeOn the net there are a lot of topic talking about 64 bit version of Adobe applications......all folks?
Anyway, if DW is still only 32 bit....that close the discussion
Thanks a lot for your support! -
HOW TO DOWNLOAD AND INSTALL PREVIOUS FIRMWARE FOR ...
Pleae help on how to solved the problem. Before the update, I can able to record programs on my Live TV Subscription, particularly the myTV DVBH program. But after the update, the record function on the Options of Live TV was gone. That's why, i won't able to record programs anymore. Please help what should I do, If there's any other firmware that I may be able to replace the current one, for my record function to be operational again, or if there's no their update version available, please help me revert back to the original firmware... Thanks! I hope to get feedback soon...
As I forsee, the only solution possible is to download and install previous firmware version in which Recording function on Live TV is not disable....Yes, a Nokia Care Center is the Final solution if the website can't offer any solution. Thanks for the feedback. Actually, my phone is still in Warranty, that's why I'm pretty sure that I don't have to pay for the services that will be perform. But still I'm into looking other solution to prevent bringing my phone to Nokia Care.
First, I had already an experience with the Nokia Care Center when I have repair my 1st N96 which took a month but they failed to repair, thus my service provider, Smart Communications, just replace the device with a new one.
Next, my location is far from the Nokia Care Center.
Finally, I opt to save all my files, with the device which is almost 95% full or 14.8GB.
Please help if there's any other option... -
How to download and install adobe forms
hi all,
how can i download and install adobe forms,
i am unable to access service website as i don't have installation number...
thnakq...Hi Vinay,
I think you have to get those Installation files through your SAP Adminstrator only. He will have access in Severvice Market Place and licenses with respective version and config of your SAP System.
Regards,
Vijay
Maybe you are looking for
-
Help:Can not find the file in jar!
Hello everyone: I build a project using Netbeans 5.0 and make a jar file with it... The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml String dataFilePath = getClass().getRes
-
Sort functionality in Data Grid
Hi Gurus, I am new to this DataGrid control.I want to establish the sort functionality when clicking on the headercolumns as in matrices. (ie.When double clicking the header column , sort the data in ascending or descending order of that column) like
-
I have two Photo Stream icons on my iPhone. How do I delete one of them?
I have two Photo Stream icons under Photos on my iPhone 4. One is active (receiving photos taken within minutes) and the other one has not been updated for atleast 2 weeks. I would like to remove the one that isn't receiving any new photos. Help. Bes
-
I have movies on my phone I need to get off and into imovie to edit and get out by tomorrow! Can anyone help? When I look at the "import movies" on imovie, it only shows the "built in isight" as an option - and there are movies on my phone that I can
-
i have a string "hai oracle tech team" i want to calculate the number of words in it i.e. it should return 4 how to do it