HT1918 getting my debit card to work on my itunes

my itunes wont take my debit card

Judging by the number of posts recently from people having their debit cards declined I don't think that they are still accepted as a valid payment type - they are no longer listed on this page (which was updated in January) : http://support.apple.com/kb/HT5552
Do you have a credit card that you could use ?

Similar Messages

  • Can't get dedicated graphics card to work.

    I can not get the dedicated graphics card to work on my laptop. I spend my night installing and uninstalling drivers, wich none of them seem to work.
    To check the card if its working, I dissabled Intel HD Graphics adapter and left the AMD, instead of getting the dedicated card to work I got "Microsoft Basic Display Driver".
    Please help me....
    EDIT: I only reinstalled AMD drivers, I didn't touched the intel ones since they work.
    My laptop: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04089426&tmp_task=prodinfoCategory&cc=us&dlc=en...

    HI FXV,
    Thank you for your query, I will do my best to assist you.
     I understand  you have already uninstalled and then downloaded and reinstalled the recommended driver to no avail.
    Here is a link to a post by @Paul_Tikkanen  that may also help.  beta driver.  This seems to have solved the issued for someone else.
    Have you tried running the HP Support Assistant to aid with updates and resolving issues.
    Have you tried Using Automated Troubleshooting (Windows 8) to assist with this difficulty.
    You could also try Refresh Your PC to Resolve Problems (Windows 8) to resolve issues.
    That last thing I can suggest before referring to HP support is a recovery back to factory. Performing an HP System Recovery (Windows 8)
    During the recovery process you will get a prompt to backup your personal files to prevent data loss, if you have not done one recently, I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8).
    If none of the above has resolved the issue then I suggest contacting HP support for assistance. They have the ability to remotely access your system to help locate and resolve issues.
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How to get micro sd card to work

    how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

    You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

  • I couldn't use my debit card to buy items on itunes store. My debit card is declined.

    I tried registering my debit card on iTunes store but it says my card is declined. But I use this same card to buy stuffs online and offline. Why is that I couldn't use this debit card in AppStore and iTunes store? When I had a chat with one of the technical service team they said Debit cards are accepted but none of my friends could use their debit card to buy items in iTunes store. Please help me with this! Thanks in Advance.

    Debit cards don't appear to still be accepted in all countries, and even where they are it seems (based on what some people have posted) that not all debit cards work.
    For a card to have a chance of being accepted it needs to be registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is then you could check with the card issuer to see if it's them that are declining it
    Do you have a credit card that you could use, or are iTunes gift cards available in your country (they are not available in all and they are country-specific, they can only be used in their country of issue) ? If gift cards are then you could potentially use them as your payment method.

  • I want to take my debit card information off of my itunes account i have a iphone 4 and i m having a hard time with this??

    I want to take my debit card information off of my itunes account i have a iphone 4 im having a hard time?? does anyone know how to put none for the billing information

    http://support.apple.com/kb/ht2534

  • HT3702 Can Debit card be used on the itunes store

    Can Debit card be used on the itunes store

    Other reports have indicated that the iTunes Store is not accepting most debit cards now, but go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store. Perhaps they can help.
    Regards.

  • Singaporean Visa debit card working but Indian Visa debit card not working

    I had an iTunes connect id linked to my singaporean DBS bank Visa debit card and it worked fine in the app store, now I have created a new account in India and I am trying to link it to my HDFC bank Visa debit card but it fails.Is there a solution to this or  is getting a credit card from the same bank the only solution?

    Debit cards are no longer accepted in the iTunes Store. But if you only want the free apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID. 
    You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • Getting Wireless PCMCIA card to work

    Attempting to get a Linksys wpc54G wireless PCMCIA card to work on my 1.5Ghz G4 PB.
    I verified that the card works, by plugging it into to a PC.. ( works fine)
    Plugging the card into my pcmcia slot, on nothing. No lights.. nothing.
    I get the PCMCIA icon on the menu bar, three options
    unknown vendor <-grayed out
    Network controller <-grayed out
    Power card off.
    I read where there might be some hack that I have to do to get PCMCIA support running, but no clues after that.
    Any help is greatly appreciated...
    Larry

    Hi,
    When I got my PCMCIA wireless card (not Linksys) it came with an install CD. The G4 maybe wouldn't of known what it was or what to do with it on it's own, needed the install feature.
    Works fine once installed. Did you get an install CD for it from Linksys? For the Mac OSX? If not, it might pay to check their web-site for one.

  • Trying to get my sound card to work with ArchLinux

    Okay, let me tell you my problem. I'm still somewhat of a noob when it comes to linux so don't be hard on me . And, yes that's half of my problem, anyways I've got a sound card called the Soundblaster X-FI USB and I've been trying it to get it to work with the alsaconf command which hasn't worked of course Let me point out that whenever I use my backup flashdrive with PuppyLinux it the Alsaconf inside of it see's the card that I'm using and automatically sets it up.. Plus whenever I type the ' cat /proc/asound/cards ' command I get this..
    0 [Intel          ]: HDA-Intel - HDA Intel
                          HDA Intel at 0xefffc000 irq 21
    1 [S51            ]: USB-Audio - SB X-Fi Surround 5.1
                          Creative Technology SB X-Fi Surround 5.1 at usb-0000:00:1d.2-2, full speed
    *(The first one being my dead onboard audio)
    So please help me out here I really want to have sound again and hey maybe I'll learn something new about linux!

    konni wrote:
    mhhm... the creative x-fi support for linux seems to be rather bad...
    --> http://www.phoronix.com/scan.php?page=n … &px=Njc3Mg
    there's some experimental driver that maybe makes it work with alsa, see here:
    http://www.phoronix.com/scan.php?page=n … &px=Njc3NQ
    My card is a USB which isn't compatible with the driver that they include. So no help there ;(. I've loaded Ubuntu recently and it has worked perfectly with my soundcard (Creative X-FI USB Surround 5.1) right out of the box. I personally think there has to be a way to get it to work in Archlinux since it worked in Ubuntu...
    Although. I suppose I could just use Ubuntu but I'm more of a fan of Arch. So does anyone have any idea what Ubuntu used as in drivers wise to get my card to work in linux??

  • I have changed credit cards three times now it will not let me change and says I need iTunes support! How do I get new debit card entered or do I need new account??

    My account w/iTunes won't let me change my credit/debit card ! I was able to do it no prob last two times ! Why am I getting message to see iTunes support!

    No one here can help you.
    Go here:
    https://expresslane.apple.com/Issues.action
    Ask for assistance, or call AppleCare.

  • Solved: Can't get Dell WLAN card to work

    Hi,
    Thet computer in question is a Dell XPS 1520. It incorporates a Dell Wireless 1505 Draft 802.11n WLAN Mini-Card (supposedly working with bcm43xx).
    dmesg:
    Linux version 2.6.24-ARCH (root@T-POWA-LX) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Mon Mar 24 11:54:58 UTC 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000bfe6d800 (usable)
    BIOS-e820: 00000000bfe6d800 - 00000000c0000000 (reserved)
    BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
    BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    2174MB HIGHMEM available.
    896MB LOWMEM available.
    Entering add_active_range(0, 0, 786029) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 786029
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 786029
    On node 0 totalpages: 786029
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 4348 pages used for memmap
    HighMem zone: 552305 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI 2.4 present.
    ACPI: RSDP 000FBBF0, 0024 (r2 DELL )
    ACPI: XSDT BFE6F200, 005C (r1 DELL M08 27D80415 ASL 61)
    ACPI: FACP BFE6F09C, 00F4 (r4 DELL M08 27D80415 ASL 61)
    ACPI: DSDT BFE6F800, 5658 (r2 INT430 SYSFexxx 1001 INTL 20050624)
    ACPI: FACS BFE7E000, 0040
    ACPI: HPET BFE6F300, 0038 (r1 DELL M08 1 ASL 61)
    ACPI: APIC BFE6F400, 0068 (r1 DELL M08 27D80415 ASL 47)
    ACPI: MCFG BFE6F3C0, 003E (r16 DELL M08 27D80415 ASL 61)
    ACPI: SLIC BFE6F49C, 0176 (r1 DELL M08 27D80415 ASL 61)
    ACPI: BOOT BFE6EFC0, 0028 (r1 DELL M08 27D80415 ASL 61)
    ACPI: SSDT BFE6D97A, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 7:7 APIC version 20
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 7:7 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at c4000000 (gap: c0000000:34000000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779889
    Kernel command line: root=/dev/sda3 ro vga=792
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2393.515 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 3112140k/3144116k available (2589k kernel code, 30688k reserved, 845k data, 292k init, 2226612k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0461000 - 0xc04aa000 ( 292 kB)
    .data : 0xc03876ea - 0xc045acdc ( 845 kB)
    .text : 0xc0100000 - 0xc03876ea (2589 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    hpet clockevent registered
    Calibrating delay using timer specific routine.. 4792.33 BogoMIPS (lpj=7984541)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4788.12 BogoMIPS (lpj=7977800)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3bd 00000000 00000001 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3bd 00000000 00000001 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
    Total of 2 processors activated (9581.46 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    net_namespace: 64 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 1080-10bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
    ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnpacpi: exceeded the max number of mem resources: 12
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    system 00:05: ioport range 0xc80-0xcff could not be reserved
    system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:09: ioport range 0x900-0x97f has been reserved
    system 00:09: ioport range 0x4d0-0x4d1 has been reserved
    system 00:09: ioport range 0x1000-0x1005 has been reserved
    system 00:09: ioport range 0x1008-0x100f has been reserved
    system 00:0a: ioport range 0xf400-0xf4fe has been reserved
    system 00:0a: ioport range 0x1006-0x1007 has been reserved
    system 00:0a: ioport range 0x100a-0x1059 could not be reserved
    system 00:0a: ioport range 0x1060-0x107f has been reserved
    system 00:0a: ioport range 0x1080-0x10bf has been reserved
    system 00:0a: ioport range 0x10c0-0x10df has been reserved
    system 00:0a: ioport range 0x1010-0x102f has been reserved
    system 00:0a: ioport range 0x809-0x809 has been reserved
    system 00:0b: iomem range 0x0-0x9efff could not be reserved
    system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
    system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
    system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0b: iomem range 0x100000-0xbfe6d7ff could not be reserved
    system 00:0b: iomem range 0xbfe6d800-0xbfefffff could not be reserved
    system 00:0b: iomem range 0xbff00000-0xbfffffff could not be reserved
    system 00:0b: iomem range 0xbff00000-0xc06fffff could not be reserved
    system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
    system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
    system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
    system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved
    PCI: Bridge: 0000:00:01.0
    IO window: d000-dfff
    MEM window: fa000000-feafffff
    PREFETCH window: e0000000-efffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
    IO window: disabled.
    MEM window: f9f00000-f9ffffff
    PREFETCH window: f0000000-f00fffff
    PCI: Bridge: 0000:00:1c.3
    IO window: c000-cfff
    MEM window: f9c00000-f9efffff
    PREFETCH window: f0100000-f03fffff
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: f9b00000-f9bfffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 497k freed
    Simple Boot Flag at 0x79 set to 0x1
    apm: BIOS not found.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie02]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    Allocate Port Service[0000:00:1c.3:pcie03]
    vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 6144k, total 14336k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:b7a0
    vesafb: pmi: set display start = c00cb803, set palette = c00cb85e
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 292k freed
    libata version 3.00 loaded.
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    ACPI: PCI interrupt for device 0000:00:1f.1 disabled
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ACPI: PCI interrupt for device 0000:00:1f.2 disabled
    ata_piix 0000:00:1f.1: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
    ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T21N, A1R1, max UDMA/33
    ata1.00: configured for UDMA/33
    ata2: port disabled. ignoring.
    scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T21N A1R1 PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ata_piix
    scsi3 : ata_piix
    ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
    ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
    ata3.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
    ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/133
    scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
    Driver 'sr' needs updating - please use bus_type methods
    Driver 'sd' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 2:0:0:0: [sda] Attached SCSI disk
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    fuse init (API version 7.9)
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Lid Switch as /devices/virtual/input/input2
    ACPI: Lid Switch [LID]
    input: Power Button (CM) as /devices/virtual/input/input3
    ACPI: Power Button (CM) [PBTN]
    input: Sleep Button (CM) as /devices/virtual/input/input4
    ACPI: Sleep Button (CM) [SBTN]
    ACPI: SSDT BFE6E4B0, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
    ACPI: SSDT BFE6DE46, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT BFE6E778, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
    ACPI: SSDT BFE6E42B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU1] (supports 8 throttling states)
    Marking TSC unstable due to: TSC halts in idle.
    Time: hpet clocksource has been installed.
    ACPI: Thermal Zone [THM] (48 C)
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    Linux agpgart interface v0.102
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 19, io base 0x00006f00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 21 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006f60
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input5
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    input: PC Speaker as /devices/platform/pcspkr/input/input6
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input7
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input8
    ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
    sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
    ACPI: PCI Interrupt 0000:03:01.1[b] -> GSI 18 (level, low) -> IRQ 22
    mmc0: SDHCI at 0xf9bfd500 irq 22 DMA
    ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    usb 5-2: new full speed USB device using uhci_hcd and address 2
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9bfd800-f9bfdfff] Max Packet=[2048] IR/IT contexts=[4/4]
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
    b44.c:v2.0
    eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:bb:90:2b
    Clocksource tsc unstable (delta = -119079669 ns)
    usb 7-6: new high speed USB device using ehci_hcd and address 2
    Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04793/0x300000
    serio: Synaptics pass-through port at isa0060/serio1/input0
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
    usb 7-6: configuration #1 chosen from 1 choice
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc0003189d070]
    EXT3 FS on sda3, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    NTFS driver 2.1.29 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
    bcm43xx driver
    usb 7-2: new high speed USB device using ehci_hcd and address 3
    usb 7-2: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi4 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    scsi 4:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
    sd 4:0:0:0: [sdb] 15794176 512-byte hardware sectors (8087 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sd 4:0:0:0: [sdb] 15794176 512-byte hardware sectors (8087 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
    sd 4:0:0:0: [sdb] Assuming drive cache: write through
    sdb: unknown partition table
    sd 4:0:0:0: [sdb] Attached SCSI removable disk
    sd 4:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete
    NTFS volume version 3.1.
    lsdev:
    Device DMA IRQ I/O Ports
    0000:00:1a.0 6f20-6f3f
    0000:00:1a.1 6f00-6f1f
    0000:00:1d.0 6f80-6f9f
    0000:00:1d.1 6f60-6f7f
    0000:00:1d.2 6f40-6f5f
    0000:00:1f.0 1000-107f 1080-10bf
    0000:00:1f.1 0170-0177 01f0-01f7 0376-0376 03f6-03f6 6fa0-6faf
    0000:00:1f.2 6eb0-6eb7 6eb8-6ebb 6ec0-6ec7 6ec8-6ecb 6ee0-6eef eff0-efff
    0000:00:1f.3 10c0-10df
    0000:01:00.0 df00-df7f
    acpi 9
    ACPI 1000-1003 1004-1005 1008-100b 1010-1015 1020-1020 1028-102f
    cascade 4
    dma 0080-008f
    dma1 0000-001f
    dma2 00c0-00df
    ehci_hcd:usb6 21
    ehci_hcd:usb7 20
    fpu 00f0-00ff
    i801_smbus 10c0-10df
    i8042 1 12
    keyboard 0060-006f
    libata 14 15 17 0170-0177 01f0-01f7 0376-0376 03f6-03f6 6eb0-6eb7 6eb8-6ebb 6ec0-6ec7 6ec8-6ecb 6ee0-6eef 6fa0-6faf
    ohci1394 18
    PCI 0cf8-0cff c000-cfff d000-dfff
    pic1 0020-0021
    pic2 00a0-00a1
    pnp 04d0-04d1 0809-0809 0900-097f 1000-1005 1006-1007 1008-100f 1010-102f 1060-107f 1080-10bf 10c0-10df f400-f4fe
    rtc0 8 0070-0071
    sdhci:slot0 22
    timer 0
    timer0 0040-0043
    timer1 0050-0053
    uhci_hcd 6f00-6f1f 6f20-6f3f 6f40-6f5f 6f60-6f7f 6f80-6f9f
    uhci_hcd:usb4 19
    vesafb 03c0-03df
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information <?>
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fa000000-feafffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [88] Subsystem: Dell Unknown device 01f1
    Capabilities: [80] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
    Address: 00000000 Data: 0000
    Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
    ClockPM- Suprise- LLActRep- BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise-
    Slot # 1, PowerLimit 75.000000; Interlock- NoCompl+
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Off, PwrInd On, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet+ LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [140] Root Complex Link <?>
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 4: I/O ports at 6f20 [size=32]
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 6f00 [size=32]
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 21
    Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
    ClockPM- Suprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [130] Root Complex Link <?>
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
    ClockPM- Suprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
    Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
    Address: 00000000 Data: 0000
    Capabilities: [90] Subsystem: Dell Unknown device 01f1
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [180] Root Complex Link <?>
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
    Memory behind bridge: f9f00000-f9ffffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
    ClockPM- Suprise- LLActRep+ BwNot-
    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
    Slot # 3, PowerLimit 6.500000; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
    Address: 00000000 Data: 0000
    Capabilities: [90] Subsystem: Dell Unknown device 01f1
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [180] Root Complex Link <?>
    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: f9c00000-f9efffff
    Prefetchable memory behind bridge: 00000000f0100000-00000000f03fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE+ FLReset-
    DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
    ClockPM- Suprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
    Slot # 5, PowerLimit 6.500000; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
    Address: 00000000 Data: 0000
    Capabilities: [90] Subsystem: Dell Unknown device 01f1
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [180] Root Complex Link <?>
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 4: I/O ports at 6f80 [size=32]
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 6f60 [size=32]
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 21
    Region 4: I/O ports at 6f40 [size=32]
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
    Memory behind bridge: f9b00000-f9bfffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [50] Subsystem: Dell Unknown device 01f1
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information <?>
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at 6fa0 [size=16]
    00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at 6eb0 [size=8]
    Region 1: I/O ports at 6eb8 [size=4]
    Region 2: I/O ports at 6ec0 [size=8]
    Region 3: I/O ports at 6ec8 [size=4]
    Region 4: I/O ports at 6ee0 [size=16]
    Region 5: I/O ports at eff0 [size=16]
    Capabilities: [70] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at febfbf00 (32-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at 10c0 [size=32]
    01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GT (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 7
    Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
    Region 5: I/O ports at df00 [size=128]
    Expansion ROM at fea00000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [78] Express (v1) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    ClockPM- Suprise- LLActRep- BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information <?>
    03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at f9bfe000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at f9bfd800 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME+
    03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 22
    Region 0: Memory at f9bfd500 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 4
    Region 0: Memory at f9bfd600 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 4
    Region 0: Memory at f9bfd700 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    0c:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
    Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at f9ffc000 (64-bit, non-prefetchable) [size=16K]
    Region 2: Memory at f0000000 (64-bit, prefetchable) [size=1M]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    Capabilities: [58] Vendor Specific Information <?>
    Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [d0] Express (v1) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <4us, L1 <64us
    ClockPM- Suprise+ LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100] Advanced Error Reporting <?>
    Capabilities: [13c] Virtual Channel <?>
    Capabilities: [160] Device Serial Number 1e-00-c0-ff-ff-4c-93-be
    Capabilities: [16c] Power Budgeting <?>
    Last edited by Fackamato (2008-06-14 12:12:40)

    (continued from above, too big post size)
    lsusb:
    Bus 007 Device 003: ID 1307:0165 Transcend Information, Inc.
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x1307 Transcend Information, Inc.
    idProduct 0x0165
    bcdDevice 1.00
    iManufacturer 1 USBest Technology
    iProduct 2 USB Mass Storage Device
    iSerial 3 08043078899215
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 39
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 98mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 3
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x01 EP 1 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 1
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x83 EP 3 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0040 1x 64 bytes
    bInterval 8
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Bus 007 Device 002: ID 05a9:2640 OmniVision Technologies, Inc.
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 239 Miscellaneous Device
    bDeviceSubClass 2 ?
    bDeviceProtocol 1 Interface Association
    bMaxPacketSize0 64
    idVendor 0x05a9 OmniVision Technologies, Inc.
    idProduct 0x2640
    bcdDevice 1.00
    iManufacturer 1 OmniVision Technologies, Inc. -2640-07.07.20.3
    iProduct 2 Laptop Integrated Webcam
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 705
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 500mA
    Interface Association:
    bLength 8
    bDescriptorType 11
    bFirstInterface 0
    bInterfaceCount 2
    bFunctionClass 14 Video
    bFunctionSubClass 3 Video Interface Collection
    bFunctionProtocol 0
    iFunction 2 Laptop Integrated Webcam
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 14 Video
    bInterfaceSubClass 1 Video Control
    bInterfaceProtocol 0
    iInterface 2 Laptop Integrated Webcam
    VideoControl Interface Descriptor:
    bLength 13
    bDescriptorType 36
    bDescriptorSubtype 1 (HEADER)
    bcdUVC 1.00
    wTotalLength 109
    dwClockFrequency 30.000000MHz
    bInCollection 1
    baInterfaceNr( 0) 1
    VideoControl Interface Descriptor:
    bLength 17
    bDescriptorType 36
    bDescriptorSubtype 2 (INPUT_TERMINAL)
    bTerminalID 1
    wTerminalType 0x0201 Camera Sensor
    bAssocTerminal 0
    iTerminal 0
    wObjectiveFocalLengthMin 0
    wObjectiveFocalLengthMax 0
    wOcularFocalLength 0
    bControlSize 2
    bmControls 0x00000a00
    Zoom (Absolute)
    PanTilt (Absolute)
    VideoControl Interface Descriptor:
    bLength 9
    bDescriptorType 36
    bDescriptorSubtype 3 (OUTPUT_TERMINAL)
    bTerminalID 3
    wTerminalType 0x0101 USB Streaming
    bAssocTerminal 0
    bSourceID 5
    iTerminal 0
    VideoControl Interface Descriptor:
    bLength 7
    bDescriptorType 36
    bDescriptorSubtype 4 (SELECTOR_UNIT)
    bUnitID 4
    bNrInPins 1
    baSource( 0) 1
    iSelector 0
    VideoControl Interface Descriptor:
    bLength 11
    bDescriptorType 36
    bDescriptorSubtype 5 (PROCESSING_UNIT)
    Warning: Descriptor too short
    bUnitID 5
    bSourceID 4
    wMaxMultiplier 0
    bControlSize 2
    bmControls 0x0000557f
    Brightness
    Contrast
    Hue
    Saturation
    Sharpness
    Gamma
    White Balance Temperature
    Backlight Compensation
    Power Line Frequency
    White Balance Temperature, Auto
    Digital Multiplier
    iProcessing 0
    bmVideoStandards 0x1a
    NTSC - 525/60
    SECAM - 625/50
    NTSC - 625/50
    VideoControl Interface Descriptor:
    bLength 26
    bDescriptorType 36
    bDescriptorSubtype 6 (EXTENSION_UNIT)
    bUnitID 7
    guidExtensionCode {8a0f88dd-ba1c-5449-8a25-f7875967f0f7}
    bNumControl 1
    bNrPins 1
    baSourceID( 0) 1
    bControlSize 1
    bmControls( 0) 0x01
    iExtension 0
    VideoControl Interface Descriptor:
    bLength 26
    bDescriptorType 36
    bDescriptorSubtype 6 (EXTENSION_UNIT)
    bUnitID 6
    guidExtensionCode {08f74a8e-ab51-2546-a2a2-31aab38e59da}
    bNumControl 1
    bNrPins 1
    baSourceID( 0) 5
    bControlSize 1
    bmControls( 0) 0x01
    iExtension 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x83 EP 3 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 16
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 0
    bNumEndpoints 0
    bInterfaceClass 14 Video
    bInterfaceSubClass 2 Video Streaming
    bInterfaceProtocol 0
    iInterface 0
    VideoStreaming Interface Descriptor:
    bLength 15
    bDescriptorType 36
    bDescriptorSubtype 1 (INPUT_HEADER)
    bNumFormats 2
    wTotalLength 485
    bEndPointAddress 129
    bmInfo 0
    bTerminalLink 3
    bStillCaptureMethod 0
    bTriggerSupport 0
    bTriggerUsage 0
    bControlSize 1
    bmaControls( 0) 11
    bmaControls( 1) 11
    VideoStreaming Interface Descriptor:
    bLength 11
    bDescriptorType 36
    bDescriptorSubtype 6 (FORMAT_MJPEG)
    bFormatIndex 1
    bNumFrameDescriptors 9
    bFlags 1
    Fixed-size samples: Yes
    bDefaultFrameIndex 1
    bAspectRatioX 0
    bAspectRatioY 0
    bmInterlaceFlags 0x00
    Interlaced stream or variable: No
    Fields per frame: 1 fields
    Field 1 first: No
    Field pattern: Field 1 only
    bCopyProtect 0
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 1
    bmCapabilities 0x00
    Still image unsupported
    wWidth 640
    wHeight 480
    dwMinBitRate 147456000
    dwMaxBitRate 147456000
    dwMaxVideoFrameBufferSize 614400
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 2
    bmCapabilities 0x00
    Still image unsupported
    wWidth 160
    wHeight 120
    dwMinBitRate 9216000
    dwMaxBitRate 9216000
    dwMaxVideoFrameBufferSize 38400
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 3
    bmCapabilities 0x00
    Still image unsupported
    wWidth 176
    wHeight 144
    dwMinBitRate 12165120
    dwMaxBitRate 12165120
    dwMaxVideoFrameBufferSize 50688
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 4
    bmCapabilities 0x00
    Still image unsupported
    wWidth 320
    wHeight 240
    dwMinBitRate 36864000
    dwMaxBitRate 36864000
    dwMaxVideoFrameBufferSize 153600
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 5
    bmCapabilities 0x00
    Still image unsupported
    wWidth 352
    wHeight 288
    dwMinBitRate 48660480
    dwMaxBitRate 48660480
    dwMaxVideoFrameBufferSize 202752
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 6
    bmCapabilities 0x00
    Still image unsupported
    wWidth 800
    wHeight 600
    dwMinBitRate 230400000
    dwMaxBitRate 230400000
    dwMaxVideoFrameBufferSize 960000
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 7
    bmCapabilities 0x00
    Still image unsupported
    wWidth 1024
    wHeight 768
    dwMinBitRate 94371840
    dwMaxBitRate 94371840
    dwMaxVideoFrameBufferSize 1572864
    dwDefaultFrameInterval 1000000
    bFrameIntervalType 1
    dwFrameInterval( 0) 1000000
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 8
    bmCapabilities 0x00
    Still image unsupported
    wWidth 1280
    wHeight 1024
    dwMinBitRate 157286400
    dwMaxBitRate 157286400
    dwMaxVideoFrameBufferSize 2621440
    dwDefaultFrameInterval 1000000
    bFrameIntervalType 1
    dwFrameInterval( 0) 1000000
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 7 (FRAME_MJPEG)
    bFrameIndex 9
    bmCapabilities 0x00
    Still image unsupported
    wWidth 1600
    wHeight 1200
    dwMinBitRate 230400000
    dwMaxBitRate 230400000
    dwMaxVideoFrameBufferSize 3840000
    dwDefaultFrameInterval 1000000
    bFrameIntervalType 1
    dwFrameInterval( 0) 1000000
    VideoStreaming Interface Descriptor:
    bLength 6
    bDescriptorType 36
    bDescriptorSubtype 13 (COLORFORMAT)
    bColorPrimaries 1 (BT.709,sRGB)
    bTransferCharacteristics 1 (BT.709)
    bMatrixCoefficients 4 (SMPTE 170M (BT.601))
    VideoStreaming Interface Descriptor:
    bLength 27
    bDescriptorType 36
    bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
    bFormatIndex 2
    bNumFrameDescriptors 5
    guidFormat {59555932-0000-1000-8000-00aa00389b71}
    bBitsPerPixel 16
    bDefaultFrameIndex 1
    bAspectRatioX 0
    bAspectRatioY 0
    bmInterlaceFlags 0x00
    Interlaced stream or variable: No
    Fields per frame: 1 fields
    Field 1 first: No
    Field pattern: Field 1 only
    bCopyProtect 0
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
    bFrameIndex 1
    bmCapabilities 0x00
    Still image unsupported
    wWidth 640
    wHeight 480
    dwMinBitRate 147456000
    dwMaxBitRate 147456000
    dwMaxVideoFrameBufferSize 614400
    dwDefaultFrameInterval 1000000
    bFrameIntervalType 1
    dwFrameInterval( 0) 1000000
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
    bFrameIndex 2
    bmCapabilities 0x00
    Still image unsupported
    wWidth 160
    wHeight 120
    dwMinBitRate 9216000
    dwMaxBitRate 9216000
    dwMaxVideoFrameBufferSize 38400
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
    bFrameIndex 3
    bmCapabilities 0x00
    Still image unsupported
    wWidth 176
    wHeight 144
    dwMinBitRate 12165120
    dwMaxBitRate 12165120
    dwMaxVideoFrameBufferSize 50688
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
    bFrameIndex 4
    bmCapabilities 0x00
    Still image unsupported
    wWidth 320
    wHeight 240
    dwMinBitRate 36864000
    dwMaxBitRate 36864000
    dwMaxVideoFrameBufferSize 153600
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 30
    bDescriptorType 36
    bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
    bFrameIndex 5
    bmCapabilities 0x00
    Still image unsupported
    wWidth 352
    wHeight 288
    dwMinBitRate 48660480
    dwMaxBitRate 48660480
    dwMaxVideoFrameBufferSize 202752
    dwDefaultFrameInterval 333333
    bFrameIntervalType 1
    dwFrameInterval( 0) 333333
    VideoStreaming Interface Descriptor:
    bLength 6
    bDescriptorType 36
    bDescriptorSubtype 13 (COLORFORMAT)
    bColorPrimaries 1 (BT.709,sRGB)
    bTransferCharacteristics 1 (BT.709)
    bMatrixCoefficients 4 (SMPTE 170M (BT.601))
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 1
    bAlternateSetting 1
    bNumEndpoints 1
    bInterfaceClass 14 Video
    bInterfaceSubClass 2 Video Streaming
    bInterfaceProtocol 0
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 5
    Transfer Type Isochronous
    Synch Type Asynchronous
    Usage Type Data
    wMaxPacketSize 0x03fc 1x 1020 bytes
    bInterval 1
    ** UNRECOGNIZED: 30 ff 42 49 53 54 00 01 08 01 10 00 00 00 00 00 d1 03 f4 01 d2 04 f4 01 d3 05 f4 01 d4 06 f4 01 d5 07 f4 01 d6 08 f4 01 d7 09 f4 01 d8 0a f4 01
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 239 Miscellaneous Device
    bDeviceSubClass 2 ?
    bDeviceProtocol 1 Interface Association
    bMaxPacketSize0 8
    bNumConfigurations 1
    Device Status: 0x0000
    (Bus Powered)
    Bus 007 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH ehci_hcd
    iProduct 2 EHCI Host Controller
    iSerial 1 0000:00:1d.7
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 6
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0503 highspeed power enable connect
    Port 3: 0000.0100 power
    Port 4: 0000.0100 power
    Port 5: 0000.0100 power
    Port 6: 0000.0503 highspeed power enable connect
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    Bus 006 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH ehci_hcd
    iProduct 2 EHCI Host Controller
    iSerial 1 0000:00:1a.7
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 4
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Port 3: 0000.0100 power
    Port 4: 0000.0100 power
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    Bus 005 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH uhci_hcd
    iProduct 2 UHCI Host Controller
    iSerial 1 0000:00:1d.2
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 1 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    Bus 004 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH uhci_hcd
    iProduct 2 UHCI Host Controller
    iSerial 1 0000:00:1d.1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 1 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    Bus 003 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH uhci_hcd
    iProduct 2 UHCI Host Controller
    iSerial 1 0000:00:1d.0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 1 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    Bus 001 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH uhci_hcd
    iProduct 2 UHCI Host Controller
    iSerial 1 0000:00:1a.0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 1 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    Bus 002 Device 001: ID 0000:0000
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x0000
    idProduct 0x0000
    bcdDevice 2.06
    iManufacturer 3 Linux 2.6.24-ARCH uhci_hcd
    iProduct 2 UHCI Host Controller
    iSerial 1 0000:00:1a.1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 1 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0003
    Self Powered
    Remote Wakeup Enabled
    I tried following the wiki on bcm43xx, copied the fwcutted firmware files to /lib/firmware , rebooted, loaded bmc43xx module, but nothing. Nothing on iwconfig or dmesg...
    Any ideas?

  • I cant get my gift card to work

    i cant get my gift card to work

    Try the iTunes Cards and Codes topic of:
    Apple - Support - iTunes

  • HT1725 my visa debit card wont work can you contact itunes

    my debit card wont can yiu contact itunse

    These are user-to-user forums, but you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • HT204053 how do i remove my credit/debit card info off of my itunes account?

    how do i remove my credit/debit card information from my itunes account?

    Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
    To change the card, go to your account settings and change the information to your new card, and hit save.

  • HT5057 iTunes account attached to debit card. How to use iTunes gift cards without charging debit card?

    Hey everyone! I have an iTunes account and attached to that account I have a debit card. I recently got some iTunes gift cards and would like to use them as the main source to fund purchases until they run out and then go back to using my debit card. How do I do this? Do I have to delete my debit card info and add the gift card info or is there a way to keep the debit card info listed but use the gift cards first?
    Thanks so much for all your help. Not sure how to retrieve any disscussions but I'll figure it out somehow.

    You can redeem iTunes gift cards by clicking "Redeem" under Quick Links at the top right of the iTunes store.
    Gift card credit is automatically used before your debit card, so there is no need to remove it. After your credit is used your debit card will be charged again.

Maybe you are looking for