HT1918 im registered with qatar store and and id for the same . now iam in indai i want to change my store and register it with indian store . how can i do ?

Im registerd with Qatar store and now i want to change the same to india store.Do i need a seperate id for the same ? If so how can i do dat ?

you need to be running OSX 10.7 or 10.8 to use iCloud i believe. It shows you are using 10.6.8 which doesn't support iCloud.

Similar Messages

What is being done about users inability to use their Apple ID at iTunes Store. I do not have another Apple ID, I do not want to change my password and I want my phone to work as it should.

What is being done about users inability to use their Apple ID at iTunes Store. I do not have another Apple ID, I do not want to change my password and I want my phone to work as it should.

You can try signing out and signing back in. You can also go into Settings > Safari and Clear all Cookies. You can even try logging into the iTunes Store on a computer and downloading a free app or something.
If none of those work, then you will have to wait for the issue to be resolved on Apple's end.

I have 2 iphones that share the same apple id but do not want them to share contacts and apps, how can I change this

I have 2 iphones that share the same apple ID I do not want them to share contacts and apps how can I change this?

You can use separate AppleIDs for iCloud, iMessage and iTunes - you just need to create unique AppleIDs for the iCloud accounts if syncing contacts that way (you will need an email address that is not already registered as an AppleID though to get another AppleID).
Apps are a different matter in that purchases are tied to the AppleID used to log in to the store to make the purchase. So you can create another AppleID for iTunes as well and use different ones on the different phones, but any apps you have already purchased with your existing AppleID are permanently tied to that AppleID.
Really, unless you are sharing apps, content and such, there is no reason to use the same AppleID on each anyway. So the simplest solution is to create new AppleID(s) for the second device. If you need an email address to do that, just get a gmail account (or hotmail, yahoo or any other free email account).

HT4009 Itunes charged me twice for the same app. I wish to buy angry birds seasons hd and angry birds rio hd. both for ipad. and you charged 2 times for a.b. seasons hd.

Itunes charged me twice for the same app. I wish to buy angry birds seasons hd and angry birds rio hd. both for ipad. and you charged 2 times for a.b. seasons hd.

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums. If you have a billing problem then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?

Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591

Different LOVs in af:query and af:form for the same VO attribute

Hi,
We need to display different LOVs in af:query and af:form for the same attribute in VO.
Is it possible to use LOV Switcher for this ?
What condition can we use in LOV Switcher attribute to check if it is View Critearia row or VO row ?

We have a VO attribute "User" which needs to be displayed as LOV in a Search Panel ( af:query component created using View Critearia ) and in a af:form.
When this VO attribute is displayed in search panel, in LOV, we need to show all users.
When this VO attribute "User" is displayed in a form for editing, in LOV, we need to show only active users.
For this, we created two LOVs "ActiveUsersLOV" ( which shows only active users ) and "AllUsersLOV" ( which shows all users ) on VO attribute "User".
LOVSwitcher attribute should return "ActiveUsersLOV" if the LOV is displayed in form and "AllUsersLOV" if the LOV is displayed in search panel.

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price I am paying for Photoshop alone?

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price that I am paying for Photoshop alone?

Contact sales support by web chat. They can cancel your current subscription and transfer you to the new one if you are within certain criteria. Otherwise you may need to wait until your subscription runs out and then sign up later.
Mylenium

TS1398 Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

There are two steps to the update for an iPhone 5. First you run the patch then you update the iOS. Did you do both? And does iOS 6.0.2 show up in Settings > General > About > Version
The first thing apple will tell you to do if you bring them the phone is to reset the phone. Try that before going any further.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Is it possible to store a multiple indexes for the same value extractor?

I ran into a situation where there were different queries that I was interested in doing that might have benefitted from having several indexes, sorted differently, but for the same ValueExtractor() instance.
Is this good practice, is it recommended, and is there a clean way to do it? It seemed like the only way I could logically "trick" the system into it would be passing some sort of "query type" constant into the ValueExtractor when it was created, and then making the equals and hashCode() methods on the ValueExtractor delegate to the constant for equality, but this seemed like a massive hack.

Hi Kris,
First, try without each value extractor and see how the different queries compare in performance. You may find that you need only one. If you find otherwise, please let us know because it may indicate a good area for additional optimizations.
Second, you are correct that the value extractor is the key of the index, and thus to have two indexes on the same value, you will need two different value extractors (i.e. the hashcode/equals comment you made.)
Peace,
Cameron Purdy
Tangosol, Inc.
Coherence: Easily share live data across a cluster!

Have a European account and want to change to a usa account without losing songs. How can this be changed.

Received gift cards and can not use because I have a european account and want to change to ameican account without losing my song list. Can you please advise.
Margaret

Roaming gnome why is this? I want to get a free app that's only available in the USA store but can't.
I have a valid credit card....it just doesn't happen to be a USA one but it still works just fine.
Many thanks
Cafeshirl

Stetting up FTP and SFTP adapters for the same interface

Experts-
I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
Please send me any suggestions which would resolve my problem

Hi Hari,
As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use SFTP for the secure transfer.
Best Regards
Srinivas

My Airport Extreme and iMac appear to have the same IP address as a result of installing a new ATT modem via direct ethernet connection. How can I reset the Airport IP without disturbing the iMac setting if the iMac can't reach the Airport?

My provider's (ATT) modem recently went bad and though I usually use an Airport Extreme connection to the modem I had to start up their new modem via a direct ethernet connection from my computer to the modem. In trying to restart my Airport to modem via ethernet connection I was told that my computer IP and Airport ID are the same and so now my computer will not connect to the Airport. How can I best get out of this situation?

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Developer and enterprise license for the same company?

Can a company have a developer license and an entreprise license or is it either/or? I am making this query as we would like to distribute our apps within our company's app store as well as from google play and app store. Thank you for your feedback

You can have both. You would need a separate Apple ID for each one.

Can i have sync and async listeners for the same queue ?

Hello,
I am a novice in JMS. Wondering experts over here could throw in some light !
Can I set both synchronous and asynchronous listeners for a perticular queue.
eg: pseudo code.
status; // default to start
run()
setListener(Q1); // listener sets status to stop
while(1)
waitForUserPrompt(value1);
switch(value1)
a: fun1();
break;
b: fun2();
break;
fun1()
while(status != stop)
stay in loop.
fun2()
// synchronously wait for "stop"
receive(Q1);
// wait and do following important code!
}

Hi,
I don't know in Chrome, but in Safari (pc or mac) you can open icloud.com twice on two different tab or windows and open one with contact and the other in Mail without messing up. What kind of mess to do you experience?
There is no other options to do what you want to do. You need to click on the little top cloud to switch from one to another.
Beside, I don't understand why even 2 open tab would help more than having to switch via the cloud icon. I may need to cut/paste some info from contact or calendar from time to time, but switch via the cloud icon is not really painfull.

Inconsistent behavior in TestStand and TestStand UI for the same sequence file

Solved!
Go to Solution.

I tried both the TopLevelVI and testexec.exe; but both of them were giving the same error. I never tried any other UI than Labview.
Because the same sequence was working without any issue on some other system, I uninstalled and reinstalled TestStand 4.0 and same sequence is now working fine, in TestStand, testexec.exe, TopLevelVI – basically everywhere. I am not sure what was wrong with TestStand in my system, but definitely something wasn’t correct.
Thank you for all the responses.
Vidula
Message Edited by Vidula S. on 08-26-2009 10:28 AM

HT1918 im registered with qatar store and and id for the same . now iam in indai i want to change my store and register it with indian store . how can i do ?

Similar Messages

Maybe you are looking for