HT1918 Problem with Visa

Hello,
When I can change apple store from Slovakia to Germany,
this re-registration proces doesnt accept payment method by my Visa credit card.
Why?
Thanks.
M.

My billing Adres is in SLovakia. I'm not living in Germany. I'm here only for few months. But Visa is internation credit card - what my billing/country adress has with this problem? I don't understand.
Thanks.
m.

Similar Messages

Problem with visa 3.2

Hi all,
We have a problem with an application (LV7.1 / WXP) which has to decode serial data from a smart actuator. This actuator sends 8 bytes of data @38400 bps every 3ms (which leaves about 1ms interval between these blocks of data). The application is working perfectly with VISA 2.60 but since we tried it with VISA 3.20, we are constantly getting framing and I/O errors.
We are sure that the problem is coming from VISA, as we ran the software on the same PC with 2.60 and 3.20. The errors come only with 3.20.
An application engineer of NI told us that these errors were not implemented in the 2.60 version and that's why they didn't show up. However, the data that were read by the software with 2.60 were absolutely consistent (no garbage) ! If we filter these errors out, many data are lost, so this is not a solution.
The problems come either in development mode or with an executable file.
Does anyone know about the origin of these framing errors ? The signal is clean, no noise and Hyperterminal does not seem to have problems with it.
If it can help, we can provide a NI-Spy capture file.
Thanks to anyone who can give us some advice on this topic !

Hi Kaustubh,
Yes, either a Spy capture or some specific error codes would be great to continue troubleshooting this issue. Without more specifics, it is hard to say what errors that VISA 3.2 is catching that 2.6 did not. Hopefully we can help you further once a spy capture is posted.
Alternatively, if VISA 3.2 does catch some errors that did not harm your original program, or even errors that your original program depended upon, you could always go back to the previous version and use that one. Just wanted to be sure you were aware of that option.
john m
Applications Engineer

Problems with VISA and the serial port

Hello,
i have a little problem with the serial port and VISA. I have changed an existing LabView- Software in that way that I have replaced the serial- module by the VISA- module. The function of the program is to communicate with different devices by RS232. After changing the modules to VISA the software doesn't work probably. The problem is, that when I try to communicate with one of the devices first I get no answer. When I try it a second time after some seconds the communication works perfect. After about a minute I send another message to my device but there is no answer again. I have to send the message again.
I hope someone in this forum can help me with my problem
cu Marco

Marco,
this sounds very much like a problem with the termination of your messages. You may have to tell VISA to add a termination character. Please follow the instructions in this document.
Best regards,
Jochen
National Instruments Germany

"What u Hear" problem with vis

I used to use the option "What U Hear" a lot when i sat in teamspeak/ventrilo, if i wanted to play of a song or something to my friends, then i just switched from Microphone to "what u hear" then the people would hear what i was playing.
Anyway, i've tried this in vista, and so far i've not gotten it to work, so i wonder if anyone here has done it's and can explain to me how its done?
The thing is, i first disable my mic, enable "what u hear", set it to default, the meter comes up showing sound, but when this is done, and i open teamspeak and join my friends servers, and i try to use my push to talk button to "play music/sound" nothing happends, i also sometimes get some sort of error with teamspeak when i have "what u hear" enabled too. So there is a problem somewhere here.
Haven't tried in ventrilo yet, so may be a teamspeak problem as well.
My soundcard is Creative X-FI Xtrememusic.
Edit: Just got it to work, seems to be a slight problem with teamspeak.Message Edited by Nitrius on 03-7-200702:44 PM

I dunno if you have tried it but in ventrilo if you go into setup you can chage the input device there to What u hear, I have use direct sound box unticked. Personally for me changing the input device in vista doesnt work that well with vent. Im not sure how TS works.Message Edited by Renegade87 on 03-7-200702:23 PM

Problems with Visa Card

Hey guys, how are you?
I just bought an IPhone and I´m trying to get some apps from the ITunes Store.
I created an account but when I try to put my credit card number and security code (from the verse of the card), I get the error script: "Please enter valid Security Code".
I don´t have any problem with my card, it´s working absolutelly normal with any other online shop around the world including Amazon, Ebay, etc...but in the ITunes store, I get this crap error!
I just have this credit card and I don´t wanna do another from Credicard or Amex only because a bug of the system.
Doing a research in past topics, I found other people with the same issue, but didn´t get any answer on how to solve this.
Please, can someone help me?

Contact iTunes.
Apple - Support - iTunes - Contact Us

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

Also problems with visa information

As many others I'm not able to update my VISA information.
I don't know why it was changed and chrome, firefox and IE tell me there is a problem on Adobe side. So please check this for me...
BTW chat support is really really really disappointing. think they have no idea what they are talking about...

Hi FrankDelporte,
Please follow the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html and try to update again.
If still the same issue please let me know and I will arrange a callback for you from our experts.
Regards,
Romit Sinha

Problems with VISA Aliases

Hi,
I'm trying to use VISA aliases to name RS-232 ports on the PXI rack. MAX can see the aliases without a problem but when I refer to them or try to use them in the labview program it cant find or use them. This is the second unit we have put together and the program works fine on the other unit.
Does anyone have any ideas how to fix this issue?
Steve
Stephen Bunt
Computer Engineering Student, University of Portsmouth

Will this help

HT1918 Problem with change Pay method Information

I'm trying to enter MasterCard account I have worked in retail outlets but also hide NONE (without a bank account)

What happens when you try to add your card, and what sort of card is it, credit or debit ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is and if it's being declined then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management
If it's a different problem ... ?

HT1918 Problems with purchasing...suggestions?

My account says my billing information does not match my credit card. I have not changed anything and up until a week ago I was able to make purchases with no problem. Any suggestions?

If you're trying to update an App and you're getting the message to update your billing information and neither of your credit cards are working, you may have an unpaid order on your account. This can sometimes happenn if your billing informaiton doesn't match or your credit card companies are blocking iTunes purchases for whatever reason.
I would say checking this site to see how it should be looking, just enter your address and it should show you how it should be entered.
https://tools.usps.com/go/ZipLookupAction!input.action
I woulds also make sure that your billing informaiton matches exactly what your bank has on file, as the slightest differences can make it not go through,

HT1918 Problems with iTunes security

I have a security problem. I bought a new computer and Apple wants me to verify my credit card but the card on file was stolen and replaced with a new on. I don;t have the old security code.

Did you backup your data before applying the update? If not a piecemeal restore might be necessary. It could be the Java update is not compatible with CS3, which itself is not the most current version of Adobe. You can't really expect operating system updates to continue to be 100% compatible with obsolete software. See my backup FAQ*:
http://www.macmaps.com/backup.html
in event you need help restoring your system or learning how to backup.
And remember, only upgrade when you can verify the software you need to run is compatible with that update, and needs that update.
- * Links to my pages may give me compensation.

HT1918 Problem with zip code

It keeps telling me my zip code is wrong, I've bought a lot of music with it being the same, never moved, never changed. So I went in my account, re typed everything in..still the same wrong zip code..

Hi,
We had te exact same issue... what you have to do is to add the specific mime type to the exclusion list (parameter is called "NeverCompressed") of the HTTP Provider.
See this for guidance:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/ad/08d52d6d95864492a6a5931bb62716/frameset.htm
I'm not 100% sure but I guess it needs a reboot after this.
Good Luck!
Benjamin Houttuin

Problem with visa RQS (always times out)

I am trying to program a pair of Wavetek 39 waveform generators, which us GPIB. I want to not fill up their input buffer by seending commands too fast, so I want to know when it is done with one before sending the next one. The way I should do this it seems, is to use the service request event. Unforunately, I can't get that working.
I've slightly modified the SRQ event example (just modified the instrument instruction string to match my instrument) and attaced that. Unfortunately, when I run that, no service request is generated, or at least the "wait for RQS" vi doesn't pick up on them, so it always times out, even thought the instruction ("WAVE SINE", which just selects a sine wave for output) is definately finfished.
Any ideas why this isn't working, or othe methods I might use to make sure I don't send instructions too fast (besides just adding arbtrary waits. . that would be dumb)?
Attachments:
SRQ Event Handling.vi ‏42 KB

yes I've seen that tutorial. It is, as far as I can tell, very similar to the example code in SRQ Event Handling.vi. Unfortunately I still get timeouts when I try using " *OPC? " instead of " *OPC " so either I'm doing something wrong (and not understanding how it's supposed to work), or my GPIB device is simply not generating the service request as it should.
- Bjørn
Message Edited by holomorph on 01-26-2007 05:54 PM
Message Edited by holomorph on 01-26-2007 05:55 PM

Problems with visa electron card

i have visa electron card, i have a money on them, at the first time when i created my accont it worked, and i buy some apps, but some time ago my payment method was declined, WHY???

Contact iTunes.
Apple - Support - iTunes - Contact Us

HT1918 Problem with payment

Hi I'm trying to update my payment details and I've tried two cards and I'm still getting the same message "your session has expired try again". It doesn't make a difference how quick I put my details in it still comes back the same. Can you help?

Try updating using iTunes on your Computer.

HT1918 Problem with Visa

Similar Messages

Maybe you are looking for