HT1918 the tone is not loud enough on my i pod

My tone is not loud enough on my i pod and i can not make it louder.

I´m using same config, MBA rocksmith cable and Mic powered by a (singleAA baterry) Ive tried recording in Quicktime (more or less noise, good volume), audacity(way too low volume) SoundtrackPro (same low volume), GARAGEBAND (lot better volume and very decent recording, great presets and much better export options!
when you listen your recording on garageband it will sound LOW volume, im using mac headphones almost at max vol, maybe it lowers the volume so there is no feedback,... BUT whe you export to file and open it on Soundtrack or quicktime VOALA! normal voice recording is hitting 0dbs, so that gives me chance to lower down to -12dbs after doing my edits.
Use GARAGEBAND to recrod voice, or any other intrument, works great with Rocksmith USB cable, mic does require use of AA battery.
Busting my head with this for hrs until I tried Garageband.
good luck.

Similar Messages

  • I am trying to record on MBA but the volume is not loud enough

    Hello,
    I'll try to break it down quickly. I have a 2011 11" MBA and I am using GarageBand.
    I use the Rocksmith jack to usb cable to play guitar and record it too, so far so good, no problem.
    So I wondered, can I make it work with a microphone? As I work on a electronic shop I had everything to test it on the latest 27" iMac. For the test I used a rocksmith cable, a jack 1/4 coupler, a male jack 1/4 to male XLR cable, and a shure PG48 microphone.
    I just had to put the recording level higher and everything was working just fine, great volume, great quality, perfect. So I bought all those cable that I was missing.
    Arrived at home, same cable, this time with the MBA 2011 and a Shure PG 58 instead. Same setting, and the volume is very low. I have to litteraly stick my mouth on the microphone to have a decent level of sound (and have to speak really loud too !). I've checked on the macbook setting, everything was to the maximum, tried with a Shure SM57 to see if it would work, same result.
    What is the problem? Is it the soundcard? Or the microphone? (That'd be weird tho') Did I forgot anything? It's weird because the guitar works just fine...
    If you can help me I'd be on happy dude !
    Thank you

    I´m using same config, MBA rocksmith cable and Mic powered by a (singleAA baterry) Ive tried recording in Quicktime (more or less noise, good volume), audacity(way too low volume) SoundtrackPro (same low volume), GARAGEBAND (lot better volume and very decent recording, great presets and much better export options!
    when you listen your recording on garageband it will sound LOW volume, im using mac headphones almost at max vol, maybe it lowers the volume so there is no feedback,... BUT whe you export to file and open it on Soundtrack or quicktime VOALA! normal voice recording is hitting 0dbs, so that gives me chance to lower down to -12dbs after doing my edits.
    Use GARAGEBAND to recrod voice, or any other intrument, works great with Rocksmith USB cable, mic does require use of AA battery.
    Busting my head with this for hrs until I tried Garageband.
    good luck.

  • Microphone voice of iPhone4 is not loud enough

    I call to my parents yesterday, but they complained the voice was not loud enough.
    Version is 5.11, I bought it in Apple.com 18 September.

    - Go to Settings>Sound and see if a Sound Limit is set. I
    Make sure it is at max
    - EU has recently required that devices like the iPod limit volume lower to preserve hearing. Thee is no way to raise that limit.  USA and other placs to not have that limit. The limit is locked to a unique identifier on the iPod like SN so restoring does not remove it.

  • Song in my iphone 4 not loud enough when i play on the dock speaker.

    when i play song on my iphone using dock speaker the song not loud enough.. pls help.

    If your dock is connected to an amplifier/speaker system try this:
    With your phone sitting in the dock, try to increase the volume, using the volume control buttons of the phone. Set it to max and you should have more sound coming out of your speakers.

  • "The Finder does not have enough memory available"

    "The Finder does not have enough memory available"
    Situation: G4 (AGP Graphics), OS 9.0 with tons of memory.
    Problem: Only with any browser viz Explorer, Communicator, iCab or Opera (all versions). Starts off fine. I have broadband. Then steadily goes slower and slower till virtually stops even with just the one browser and one window and no other programs in use. Try to do anything else and above message appears. The problem seems to involves the operating system and the way it interacts with the code of certain sites eg Ebay. It has nothing to do with PRAM, or allocation of memory to the browser or deleting various Preferences. The deletion of Finder, Memory etc Preferences, quitting, restarting all deal with the symptoms and are not a permanent cure. The primary symptom is a massive loss of available memory, not even enough to run a single browser and one window! Any simple solutions? I realise I can upgrade to OS 9.2. Will this work? Apart from this browser problem I am happy with my present set so is there a simpler solution apart from upgrading?

    Thankyou to all for the welcome and your responses to my query.
    I have 640mb of RAM. The problem is intermitent and is determined to a great extent by the sites which I visit. Yahoo for example is great - no problems. In another window visiting eg Ebay will eventually (variable) cause a slowdown. I have switched Virtual Memory on and off, changed cache, program allocations of memory, regularly used Norton Utilies to inspect, repair, defrag etc and looked all over the place for advice. Things run great for a while but it is only a question of time , months or even days, before the problem re-appears. I was surprised to find so little about it on the Web. Perhaps everyone else has upgraded or is on OS X! If I could have done something without upgrading I may have gone for that option as everything else is running like a dream and I want to keep it that way! I use programs such as Paperport (sadly not made for OS X) which I find a marvellous scanning and paperwork management program. To get it to work with OS 9.0 I had to determine with Cassidy & Green's marvellous extension conflict identifier Conflict Catcher that the Control Strip needed disabling. If I upgrade, I could, for Paperport et al, upset the Apple cart! I have also read about a program called Reaper which was used to deal, I believe, with Finder memory problems with OS 7 and OS 8. It is still available on at http://www.versiontracker.com/dyn/moreinfo/macos/3783 Apart from this I know nothing more at present about it.
    However, the following was one item which I found of great interest which goes along with your advice of upgrading.
    From http://www.icab.de/faq.html#q36
    "Mac OS 8/9: Why does iCab 3.0 complain that it is running out of memory all the time?
    This is not a bug of iCab, it's a bug of the "classic" MacOS 8.5/8.6 (and maybe OS 9.0 as well). The problem occurs when a web page has web forms with text input fields. The Unicode text input fields (MLTE) of these old MacOS releases do still have some serious bugs. One of theses bugs causes the MacOS to reserve almost all available memory for these text edit fields so there's no memory left for iCab. Apple has fixed this bug in MacOS 9.2.x (maybe in 9.1 as well), so the best solution for this problem would be to upgrade the MacOS. If this is not possible, you can disable the Unicode text input fields in the preferences dialog of iCab in the panel "Operation > Browser, Tabs". Switch off the option "Use Unicode TextEdit" to configure iCab so that it will use the "ancient" text edit fields, which do work OK, but which do not support Unicode".
    Here is someone with a similar problem back in 2000:
    "From TacitRF
    Date: Thurs, Jun 8 2000 12:00am
    Email: [email protected] (TacitR)
    Groups: comp.sys.mac.system
    This is ridiculous! I have hardly touched this machine today. Does RAM get eaten up while the computer is sitting there idle (and sleeping every now and then after I've checked email or looked at a couple newsgroup posts)?
    Yes, it can, under certain circumstances.
    Open your TCP/IP control panel. Click the Options button. (If there is no Options button, select Edit->User Mode, and click "Advanced.") Is "Load Only When Needed" turned on? If it is, you may severly fragment the memory in your computer every time you start a program that uses the Internet. Let's say, for example, you launch Netscape. Netscape tries to access the Internet. This causes TCP/IP to load, on top of Netscape. Now, when you quit Netscape, the memory it was using may not get freed up. Launch Outlook. It loads TCP/IP. Now, when you quit Outlook, you may not get its memory back either". Try turning off Load Only When Needed in the TCP/IP Options, see if that solves
    the problem. Hope that helps!"
    I find that whatever I do one way or another the slowdown will eventually reappear. A bit like weeding gardens and washing dishes! Well unless there is a way of dealing with OS 9.0 memory behaviour with browsers it looks like an upgrade will have to do!
      Mac OS 9.0.x  

  • Volume - Not loud enough.

    My husband and I would like to listen/watch videos without headphones, however, the maximum volume is not loud enough for us to understand some words. Is there a way of increasing the maximum volume output without the use of external speakers or headphones?
    Thanks.

    Open iTunes on your computer---Podcast--->
    Pick the Podcast you want to raise the volume--->
    Press the keys...Command+i--->
    Press the Option tab--->
    Check the box Volume Adjustment...Set the volume to your liking.
    or set it to 100%
    If you want to do all the podcast at one time. Choose all the podcasts at one-time. You can do the same with movies and music too. If you want to adjust the volume to a select few in you library, Seclect All--->Option key and click on the podcasts (video, music) that you want to deselect.

  • N900 in coming call volume not loud enough

    N900 in coming call volume not loud enough
    Can any one help please
    When some one calls me i can just about hear them.
    I have looked in phone settings etc but cant find where i can turn it up.
    i know you have a volume control when a call is taking place and is right up but dont think it is that.
    any help would be grate thanks.

    I am having similar problems with my phone, mostly just when using the earphones/mic that came with the phone. Don't have any solutions yet, just wanted you to know there are others having similar problems.

  • ITunes not loud enough

    I have a Toshiba P205 notebook. All the drivers are up to date. When I listen to podcasts on iTunes, I have to turn the volume all the way up, set the preamp to max, everything, and it's still not loud enough. When I run the 'test' app from Realtek, it's loud enough to break glass. What's up with iTunes?
    Same thing on my iPhone 3GS. Just not loud enough.
    Ideas?

    I have to turn the volume all the way up, set the preamp to max,
    What "preamp"?
    iTunes has its own volume separate from the system volume. Top left under the Play button.

  • HT4528 sound is not loud enough

    My ringtones for phone calls is not loud enough.  Is there a way to increase this other than the norm?

    To turn the volume up, go to Settings > Sounds and slide the volume bar to the right.
    Press the volume + button when you're on your home screen to turn the sound up.
    Double-tap your Home button and flick your finger from left to right TWICE and slide that bar to the right
    Remove any cases that you have and test it also
    If its still not loud enough for you after doing these, you can reset all settings (Settings > General > Reset). If its still not quite what you want, restore it as new in iTunes on your computer or take it to the Apple Store http://support.apple.com/kb/HT1414?viewlocale=en_US

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • I am using an I-mac series 4 with a 2GHZ processor, I tried to convert to Lion and the rresponse was the chip was not fast enough, can I upgrade the chip  or do I need to purchase a new computer?o

    I am using an I-mac series 4 with a 2GHZ processor, I tried to convert to Lion and the rresponse was the chip was not fast enough, can I upgrade the chip  or do I need to purchase a new computer?

    Unfortunately yes, but Snow Leopard is still a great OS in the meantime so don't rush in too quick if you really don't need to.
    Good Luck
    Pete

  • After I reset the iPod I lost all of the iPod contents.  When I attempted to resynch I learned the iPod did not have enough space.  How can this be so when I have nothing on the iPod?

    Please help!.
    After I reset the iPod I lost all of the iPod contents.  When I attempted to resynch I learned the iPod did not have enough space.  How can this be so when I have nothing on the iPod?

    You will prbably had other sync setting than the default ones
    Check if the option "Only sync marked songs" is checked.

  • When I turned on my computer this morning it had a new noise coming from the top of the screen at the back.  Not loud but almost whirring.  What might this be ?

    When I turned on my computer this morning it had a new noise coming from the top of the screen at the back. 
    Not loud but almost whirring. 
    What might this be ?

    21.5 Mid 2010
    Processor  3.2 GHz Intel Core i3
    Memory  4 GB 1333 MHz DDR3
    Software  OS X 10.8.5 (12F37)
    I just found an answer ! 
    I had moved my computer into another room and had to turn up the brightness, as I have always had it on the lowest setting.  In doing so it created the noise, I turned it right down and it stopped.  I have now set it about level 3 so it's not so distracting.
    thanks

  • When I open my Mac, the screen is not bright enough.  How can I make it brighter?

    When I open my Mac, the screen is not bright enough.  How can I make it brighter?

    tjk
    It worked like a charm.  SOOOOO simple.  Duh!!!!!!
    Thanks for your help.
    nancyfromst.albert

  • HT200006 My iPhone 5 is freezing and the sound Is not loud how it should

    My iPhone 5 has been freezing locking by itself and the sound is not loud how its use to be can someone tell me why this is happen I have only had this phone for this year

    wait it for your iPhone to die then before it turns it plug it into iTunes while holding the home button and it will force it into recovery mode.
    will be hard to get the timing right cause u will need to wait for the battery to die and charge up again. Other then that just take it to apple and have them replace the device for a fee.

Maybe you are looking for