HT1923 I am trying to run iTunes and have been advised that i must uninstall and install again. However, in Control Panel, I don't have the option the uninstall. HELP!!!

I am trying to run iTunes. When I do I get this message "Apple Application Support was not found. Apple Application Support required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Wiindows error 2)" . However, in Control Panel, there isn't an option to remove or unistall iTunes, only an option to repair.
Now, when I dowloaded iTunes, i saved it to my flash drive so that i can have it with me whereever I go. I am not sure if the problem stems from there. I also did this so as not to save it on my work computer but still be able to run it from my flash drive.
Please HELP. I miss my music and podcast.

This solved my question by b noir on Aug 26, 2011 7:23 PM
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Similar Messages

TS1277 iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!

iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!

I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance.
Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows.

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

Keep being met with the same error sign: 'Apple Application Support was not found. Apple Application Support is required to run iTunesHelper. Please uninstal iTunes, and install again. Error 2'

iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error 'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??

Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
Uninstalled /reinstalled
Disconnected all firewalls and antivirus and even uninstalled them with Revo..
with that effort..I then used winrar to extract to a file and manually install each piece..
all load EXCEPT Apple Application Support..but only if I do it manually..
Quicktime had to be manually installed.
Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
Windows Installer likes to quit alot..not sure how to fix that..urgh
Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
Any help is much appreciated!

Issue running Forms. System keeps trying to run OAJInit and install JRE 5.0

Hi,
Just changed to a new machine and trying to access forms from Firefox, IE and/or Netscape. When clicking on a link that should take me to forms, I am asked to download and install OAJinit.exe, with the following message:
In order to access this application, you must install the J2SE Plugin version 1.5.0_03. To install this plugin, click here to download the oajinit.exe executable. Once the download is complete, double-click the oajinit.exe file to install the plugin. You will be prompted to restart your browser when the installation is complete.
Installation of JRE 1.5 goes well, but when trying to run forms, I am still prompted to download OAJInit.exe... If I proceed with the installation, I get
"you already have this version of the JRE installed. Please uninstall the product through your add/remove programs utility before reinstalling."
Any idea what I could do wrong?
Thanks

I agree with Renato,
The $OA_HTML/bin/appsweb_INSTANCE_server.cfg (or appsweb.cfg in single Apps node configuration) file is right there JINIT/Client JRE configuration is stored on a server side.
It is advisable however to adjust an autoconfig context configuration file and then run autoconfig then instead of modifying configuration file manually.
Plus as far as I know using Sun J2SE 5.0 on a Clint side is in Early Adopter Program and isnt certificated for wider public.
REF http://blogs.oracle.com/schan/newsItems/departments/release11i/2006/04/18#a23
Replacing Oracle JInitiator with Sun's Native Plug-In
But let me ask the following question before you will go ahead with Renatos suggested:
- Is this problem appeared only on that single PC?
- If yes then which Jinitator version is used on other PSs to get connected to the particular environment?
- Can you try in IE Tools-> Internet Options-> Advanced -> Java (Sun) and untick Use JRE 1.5.0 ... Try to connect to the environment after that.
Yury

ITunes wont open because I'm missing msvcr80.dll? It said to remove iTunes and install again but it wont work, HELP?

I just want my iTunes back I think I accidentally deleted msvcr80.dll? What should I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Error when trying to run itunes

I downloaded ace codecs pack for my pc and after installing I tried to run itunes and i receive an error every time I try!
PLZ help me I dont wanna format the pc agein

hello the moon!
I downloaded ace codecs pack for my pc and after installing I tried to run itunes and i receive an error every time I try!
gaah ... are you currently getting an "itunes has encountered an error ..." message? if so, does your QuickTime currently give you an error message when you try to launch it?
the Ace Mega Codec Packs have been breaking QT 7 and itunes lately. i think it's something to do with some versions of the codec pack containing the old QT 6.5.2.10 codecs, but i'm not precisely sure what the mechanism is.
first, let's try a careful standalone QT 7.0.3 reinstall. download and save a copy of the the standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off all antivirus and antispyware applications prior to the install.
Quicktime 7.0.3 Standalone Installer
if you get an error message on the install, let us know what it says. include error message numbers if you're getting any.
if the install goes through, do QT and itunes launch properly again?
love, b

I have about 14 gbs of Other on my iPad. After searching, I notice that it is mostly photos. Years and years of photos. However, when I sync, I only sync the last 6 months. I have tried deleting all photos and syncing again. No luck. Any suggestions?

I have about 14 gbs of Other on my iPad. After searching, I notice that it is mostly photos. Years and years of photos. However, when I sync thru iTunes on my iMac, I only sync the last 6 months. I have tried deleting all photos and syncing again. No luck. Any suggestions?

Read the User Tip that razmee209 linked for you in the post above. If nothing in there works, there May be something on your iPad that is corrupt. Backup the iPad, restore to factory settings, and them restore the backup. If that doesn't fix it, restore as new and download all of your purchased content again.
Use iTunes to restore your iOS device to factory settings - Apple Support

TS4433 M 7th generation ipod is not recognised in itunes. It is in windows and i have uninstalled it and installed again 3 times any ideas

7th generation ipod is not recognised in itunes. It is in windows and i have uninstalled it and installed again 3 times any ideas.

Hey haptat1,
Thanks for the question. I understand that your iPod nano is not displayed in iTunes when connected to your computer. The following articles include troubleshooting steps that may help resolve your issue, depending on the symptoms:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
iTunes reports that "iTunes cannot recognize this iPod at this time"
http://support.apple.com/kb/TS1416
Thanks,
Matt M.

After restoring Windows I tries to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.' how do I do this?

After restoring Windows I tried to open iTunes and got a message saying 'This version of iTunes has not been correctly localized for this language. Please run the English version.
What do I do? I don't want to lose my entire liberary!

Hi there computerfailure,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W.

HT1923 im trying to unistall itunes and its components and is not letting me/

im trying to unistall itunes and its components and is not letting me?

Do you get error messages when doing the uninstalls? If so, what do they say? (Precise text, please.)

I tried to update itunes and now it won't open, how do I fix it? Will uninstalling and reinstalling erase my library?

I tried to update itunes and now it won't open, how do I fix it? Will uninstalling and reinstalling erase my library?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Tried to reinstall itunes and got apple application support not found. i have a folder on my desktop of apps removed during a refresh and all my apple stuff is in that folder.

Im running windows 8 on my desktop. i tried to reinstall itunes and when i open it i get the following message " Apple Application Support not found, Apple Application Support is required to run iTunes". I have a folder on my desktop that has files in it that says Apps removed during refresh and there is Apple files in there. Im guessing this could be a windows issue but Im not to good with computers. Any help would be great.

Hello agerveler,
Thanks for using Apple Support Communities.
It sounds like we may need to do a complete removal of iTunes and its components, followed by a reinstall. Follow the instructions in the following article to resolve your issue:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Take care,
Alex H.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Trying to download Itunes and am getting error messages 7 and R6034

Trying to download Itunes and am getting error messages 7 and R6034?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT1923 I am trying to run iTunes and have been advised that i must uninstall and install again. However, in Control Panel, I don't have the option the uninstall. HELP!!!

Similar Messages

Maybe you are looking for