HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade

what hard drive changes are made to my computer when downloading the i-Tunes 10.6 upgrade / update?
what registry changes does it make, if any?

Ok, so as far as the hard drive goes, go for the biggeset one you can afford/need. 500 gb, should be plenty big for just about anybody. But as for the speed of the drive.... Yes, a 7200 rpm drive will drain the battery life much quicker than a 4200 rpm drive or even a 5400 rpm drive. Apple has been shipping 4200 rpm drives as a standard for ever practically, and recently made the 5400 rpm the new standard with the 7200 as an option. More important than the physical speed is the buffer size. A nice big buffer will provide quicker access to data and not eat into your battery life. Then there is also the option of an SSD (solid state drive), but those are still crazy expensive.
I've read any Serial ATA drive is compatible with the drop sensor. I upgraded my hard drive with a Seagate, and it works great. Apple generally ships Toshiba drives in their laptops.
replacing a hard drive can be a bit of work. First of all it will void your warranty (But your is obviously expired anyways) It is pretty complicated and takes a lot of patience. iFixit has great step by step instructions. here's a link : http://www.ifixit.com/Device/MacBookPro_15%22_Core_2_Duo_Models_A1226_andA1260
Hope this helps

Similar Messages

My hard drive crashed. Lost Photoshop 11 software. When hard drive fixed, I bought and downloaded Elements 12. Trying to get photos in 12. All I have had for several hours are hour glasses. Photos are there if you click on hour glass, but cannot get photo

My hard drive crashed. Lost Photoshop 11 software. When hard drive fixed, I bought and downloaded Elements 12. Trying to get photos in 12. All I have had for several hours are hour glasses. Photos are there if you click on hour glass, but cannot get photos to show up on the grid. What should I do?

Thank you. Unfortunately I have very limited technical skills.I am not sure what some of your suggestions relate to and the others I would not know how to do. But I do appreciate your respnse. A good start might be if you could tell me how to turn off face recognition. Thank you again

So lately I decided I was tired of Tiger, and decided I would upgrade to Leopard. Well I made the mistake of erasing the hard drive before I made sure it would work. Well now like the installer was before it failed. And now when I boot it just won't work

So lately I decided I was tired of Tiger, and decided I would upgrade to Leopard. Well I made the mistake of erasing the hard drive before I made sure it would work. Well now like the installer was before it failed. And now when I boot I get the normal finder/question mark flashing folder. I also found a power Mac g4 that needs a new operating system. It's running 9.2. It's going to my grandma as a gift. I really need help.

I think you'll need to find a Retail 10.5 Disc.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

CAN NO LONGER DOWN LOAD MUSIC TO MY SEPERATE HARD DRIVE AS ITUNES CLOSES WHEN I TRY TO CHANGE THE SETTINGS

i am unable to down load my itunes music onto a sperate hard drive as itunes closes when i try to change the settings

i dont know much about computers but I think this happened to me before.
as I said i hardly know computers. i think I unplugged the hard drive all cables and i turned the computer off too. plug it all again and see if it grabs it again. i did it and it worked. some how the extHD gets stuck on on. so thats why I unplugged it all. I dont know if you want to try that.

I recently transferred my ITunes library to an external hard drive. I made sure to copy all the data from the saved location. After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

I recently transferred my ITunes library to an external hard drive. I made sure to copy all the data from the saved location. After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing. Is there any way to recover the data? Thanks for any help.

I may have found an answer here:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
Message was edited by: williamson42
Message was edited by: williamson42

Clear IDOC creation when only header level changes are made ME22N.

Hi All,
when the PO is on changed in the header level only(for example header texts and header code) and when we execute RSNAST00 one BADI getts triggered which checks if the Item category is 9 and badi will clear the IDOC creation.
If the PO item category is = 9, the IDOC must not be created. This badi works fine if the changes are made at
1)at Item level
2)both header level and Item level
In case of 1 and 2 we have both header segment E1EDK01 and item segments E1EDP01.As a result it checks for the item category in the item segment.so idoc is not created.
3)BADI is not working when the changes are made at the header level only. The IDOC is getting created even though the PO has the item category as 9.
I found in this case only header segments are availble while debugging and the item segments are not there to check the condition for the item category.
Please any one can suggest me possible solutions to clear idoc creation when only header level changes are made ME22N.
The BADI used is as below.
DATA : lwa_data TYPE edidd.
DATA : lw_dp01 TYPE e1edp01.
DATA : lwa_control TYPE edidc.
CHECK idoc_control-rcvprn = '3PL' AND idoc_control-idoctp = 'ORDERS05'.
LOOP AT idoc_data INTO lwa_data.
    IF lwa_data-segnam = 'E1EDP01'.
      lw_dp01 = lwa_data-sdata.
      IF lw_dp01-pstyp = '9'.
        CLEAR create_idoc.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHO
Thanks in advance.

Hi all,
Is there any way that I can get the item category details when Only header level changes are made to the PO in ME22N and only header segments are available in the IDOC.
Is this possible:- Fetch the po number and item category details from ekpo table that matches with the header segment po number and then check for item category value to clear the idoc creation?
Any information is helpfull.
Edited by: Selina.selk on Nov 20, 2009 1:39 PM
Edited by: Selina.selk on Nov 20, 2009 2:49 PM

Automatic Output Message when Changes are made to a PO

Hi Gurus,
I would like to know to to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
Thanks,
Jograd

Hi Greetings
would like to know to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
You need to make the following u201CFine-Tune controlu201D settings for the output type so that output will be generated automatically once changes are made.
ONLM --> Messages --> Output control --> Message types -->Define Message Types for Purchase Order --> Fine-Tuned Control: Purchase Order --> Include indicator 2. Printout of changes for the output type.
Gobinthan G

Why Synonym becomes INVALID when changes are made on the related object ?

Hi all,
WHY SYNONYMS becomes invalid when changes are made on related OBJECTS ?
Is there any specific reasons for this.?
Is there any method or procedures to make the synonym VALID as soon as the we perform any alteration on the related object.
Thanks
Himabala

Synonym will be validated when it is accessed, no need to take an action.

I created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song help

i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song and i dont want to have to add all my music again, is there anyway of changing the location to a new folder all at once? for example, if it is my computer/harddrive/music/.... can i change it to mydocuments/musis/...
and having the exact same music folder so all the further directions are accurate?
thanks
please i need help

pass the music on your external hard drive to the computer then drag the to Itunes

Can you share an external hard drive over a network when your Apple Airport Extreme is in bridge mode?

Hello, is it possible to share an external hard drive over a network when I have my Airport Extreme in bridge mode? I can't use my AE as my main router at the moment but still want to be able to use the hard drive on the network, and the router I am using isn't capable of adding an external hard drive. I use Windows 7 and the other router is a Netgear. I have searched the communities and have not come across an answer to this question. I have tried several configurations within windows to try and see the hard drive but none have worked. I can see the hard drive when I run Airport utlities, but it cannot be seen on the network. Thanks to anyone who can help!

I think there is some confusion in this thread..
If you are sharing on a local LAN port forwarding is not required.
is it possible to share an external hard drive over a network when I have my Airport Extreme in bridge mode?
Answer is yes.. no port forwarding, mapping whatever term is used.. is needed. Port mapping is required when you cross over a NAT router.. as long as all the devices are inside a single LAN.. then no port mapping.
I assign to my Airport Extreme, do I do so with the settings of:
Service: SMB
Type: TCP
Server IP: xx.x.x.x
Port Start: 445
Port End: 445
This would not work even from WAN.. SMB is blocked by all responsible ISP.. there is simply too many unprotected windows machines out there. If they allowed SMB .. the world would be flooded with hijacked bots. And stolen data like bank accounts. SMB is not a secure protocol.
But this is not necessary on a LAN.
The problem can be Mavericks which does a terrible job presenting network drives.. The usual recommendations are to use AFP or force the connection to CIFS (ie SMB1 not 2).
If you use airport,, then use AFP.
In finder.. Go, Connect to server.
AFP://AEname or AEIPaddress. (replace with the network name of the AE or its actual IP address).
When asked for password.. type public if you did not change it or use whatever password you put.
Store the password in the keychain.

Hard drive gets error -50 when connected internally, but not in USB enclosure.

I have a SATA hard drive that works perfectly when connected through an external USB enclosure but whenever it's plugged into the internal SATA connector on my MacBook Pro I receive the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." any time I attempt to move or copy a file to it.
This doesn't happen with any other hard drive I connect internally, so I don't believe it's an issue with the internal cable.
I have made sure all permissions are set to allow reading and writing to the drive as well as selecting the "Ignore ownership on this volume" option in the Get Info panel.

If I were you, I would just replace the drive. Since other drives work, you're probably right in assuming that it's not a SATA cable issue, but rather an issue with that specific drive.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

The name and the root of the hard drive change, how can i reset it?

the name and the root of the hard drive change, how can i reset it?

That sort of thing doesn't happen automatically,. Someone had to change it. Just rename it anything you like. Right click on it and select Get Info then in the Name and Extension are name what you like.

My hard drive was replaced last week. The geek squad from Best Buy backed up all my information prior to replacing the hard drive. they reinstalled everything on the new hard drive including iTunes. When I opened I tunes, my playlists were missing

My hard drive was replaced last week on my macbook pro. The geek squad from Best Buy backed up all my information prior to replacing the hard drive. They reinstalled everything on the new hard drive including iTunes. When I opened I tunes, i had some but not all my songs listed. All my playlists and purchases were missing. I attempted to sync my iPod so my playlist and information would be reinstalled but iTunes does not recognize the iPod to allow it to sync.

Hello Boylen33,
I was very disappointed to read about your experience when taking your phone in to the Geek Squad for service. I agree with avm5689, purchasing the Geek Squad Protection plan is a great way to protect your investment in a product that is so necessary to our everyday lives. The agent should have known exactly what steps to make the exchange an easy, and smooth process, and I sincerely apologize for the frustrating experience you received instead.
I assure you every single post on the forum from our customers is of utmost importance to us, and we are always happy to help in anyway we can. As per the terms and conditions of your Geek Squad Protection plan, you should receive one battery per the life of the plan, and you can order it simply by calling our Partstore. As I mentioned previously, this is something the Geek Squad agent should have explained to you, or as the mobile specialist did, call them for you, and I'm truly sorry this wasn't handled in that manner causing you to waste a lot of time at the store. Using the e-mail you registered on the forum, I was able to locate the service order, and I will be documenting your experience for further training opportunities.
Once again, I am very sorry for any disappointment this has caused, and I appreciate very much you bringing this to our attention. I hope you will give us another in chance to offer you a much better experience.
Respectfully,
Maria|Social Media Specialist | Best Buy® Corporate
Private Message

Random restarts after hard drive change!!

Hi guys, I have a Late 2009 15" MacBook Pro (Unibody) A1286 that recently had a hard drive change due to the stock one coming close to failure. After a couple hours of usage, It suddenly freezes (and if i'm playing audio, it sounds like a broken record for a second) and restarts and gets the "Your computer restarted because of a problem" message. When the desktop loads, It requests to send a report to apple and provides this message:
Anonymous UUID: 9CA89A41-B525-1850-2916-3E5637C22C3B
Fri Nov 28 18:27:04 2014
panic(cpu 0 caller 0xffffff8006edc43e): Kernel trap at 0xffffff80071c8881, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x00000000a2039000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x00000000091f0000, RDX: 0xffffff8020d7a810
RSP: 0xffffff80c227bf50, RBP: 0xffffff80c227bf70, RSI: 0x0000000000000050, RDI: 0xffffff8020d7a810
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80c227be70, R11: 0xffffff80152a6080
R12: 0x0000000000000001, R13: 0xffffff80210257f8, R14: 0x0000000000000000, R15: 0xffffff8021025840
RFL: 0x0000000000010286, RIP: 0xffffff80071c8881, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80c227bbe0 : 0xffffff8006e22f79
0xffffff80c227bc60 : 0xffffff8006edc43e
0xffffff80c227be30 : 0xffffff8006ef3976
0xffffff80c227be50 : 0xffffff80071c8881
0xffffff80c227bf70 : 0xffffff80071c6df8
0xffffff80c227bfb0 : 0xffffff8006ed7607
BSD process name corresponding to current thread: java
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000006c00000
Kernel text base: 0xffffff8006e00000
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 25628519916839
last loaded kext at 322876459037: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f89188000, size 65536)
last unloaded kext at 512411113713: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f89188000, size 57344)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.34
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000LPVX-22V0TT0, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:
It was a brand-new hard drive, so there shouldn't be any issues!!! Any help or ideas ? The person I got the HD from suggested it's another issue such as the power adapter or motherboard, but It started after the swap.

Back up all data, then remove the Norton/Symantec product by following the instructions on either of these pages:
Uninstalling your Norton product for Mac
Removing Symantec programs for Macintosh
If you have a different version of the product, the procedure may be different.

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade

Similar Messages

Maybe you are looking for