HT1925 cannot install upgrade because old Bonjour components cannot be removed Bonjour.msi not found

Cannot install upgrade of Itunes due Bonjour old files cannot be removed nor Bonjour.msi not fuond on PC

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

Can not down load new i tunes up date says old bonjour can not be removed seek advice i tunes is nothing but a pain can any one help

can not down load i tunes up date because old bonjour can not be removed can any one help
because apple must know about this problem but are not help full

I would try uninstalling all of the Apple software and then reinstalling it using these instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
You migh want to try doing this when in safe mode.

I purchased photoshop cs5 and I want to re install it because I have a new computer but I do not have the disk only the serial number?

i purchased photoshop cs5 and I want to re install it because I have a new computer but I do not have the disk only the serial number?

Download CS5 products

HT1926 I can't re install iTunes because I get a error saying mobile device could not start.

I can't re-install iTunes because i get an error saying Mobile Device could not start?

Same here TC, very annoying

Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?

Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I'm running windows XP, trying to uppdate iTunes, instalations pack iTunes.msi not found. Is it posible to download this?

I'm running windows XP, trying to uppdate iTunes, instalations pack iTunes.msi not found. Is it posible to download this?
I have tried to seek for it on the computer but no.
Se picture

I had the same problem and managed to fix it by doing the following :
First go to the control panel
Choose Add/Remove programs
Find iTunes in the list
Select "Change" and then, when it comes up with the option, "Repair"
I found that this fixed the problem for me and I was able to do the update without coming up with this error - hope it helps!

ORA-02298: cannot enable name - parent keys not found

Hi All,
I got this problem while creating Foreign Key constraints ORA-02298: cannot enable name - parent keys not found. How to rectify this problem

alter table WORK_APPROVAL_DETAILS
add constraint FK_WRKAPPR_AUTH_APPR foreign key (APPROVER_CODE, PCC_INFO_CODE)
references AUTHORIZED_APPROVERS (APPROVER_CODE, PCC_INFO_CODE);
WORK_APPROVAL_DETAILS:
inspection_id     number(16)
work_code      varchar2(18)
approver_code     varchar2(12)
approver_remarks     varchar2(200)
approval_date     date
role_code     char(2)
reference_no     varchar2(50)
pcc_info_code     varchar2(9)
status_code     number(4)
AUTHORIZED_APPROVERS
approver_code     varchar2(12)
approver_name     varchar2(30)
dept_code     varchar2(3)
desg_code      char(2)
is_active     char(1)
address     varchar2(250)
role_code     char(2)
created_by     varchar2(20)
created_date     date
pcc_info_code     varchar2(9)
qualification     varchar2(50)
experience      varchar2(25)

ORA-02298: cannot validate (PL_REM_FK_ES_EMP) - parent keys not found

hi
I disabled some constraints. But now, when I try to enable them then I get the error:
ORA-02298: cannot validate (PL_REM_FK_ES_EMP) - parent keys not found.
Plz guide me to resolve this problem.

Hi,
there is most likely some orphaned records in the child table. what command did you use to delete the record? what the output of
select xxxxx from child_table a where not exists (select 'x' from
parent_table where primary_key = a.key_values);
dan

When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

I have solved the Problem

Cannot join tables .item dependency not found in EUL

cannot join tables.item dependency "a04 currency->b27 exchange rate 1" not found in EUL
I am not able to open a workbook in discoverer in user edition.
It seems I unwittingly deleted a join in the end user layer. I have tried to redo the join but I have not been able to replicate the join required. Is there any way I can work around this join without having to scrap my workbook? Rebuilding the workbook took a long time.
Any suggestions would dig me out of a deep hole

Hey,
I got this Error after our environment was cloned from APPS Production (PRD) instance to Development (DEV). I saved my workbooks that were 'under construction' as *.DIS files as local copies to the network.
After the clone was finished I imported the latest Business Areas back onto DEV, but there was no way I could open my saved local workbooks due to the error "cannot join tables .item dependency not found in EUL".
After some hours of rage, by accident we found out that one of our Functional Consultants was able to open these workbooks! It turned out that when I logged on to APPS under the user_name (from FND_USER) of this person I could indeed open the workbooks and save them to the database after which I could open them again with my own user.
So -in this case- I solved the problem by using a different user to open the workbooks. But who knows next time...
Good luck, you'll need it.

Cannot delete itunes .msi not found and cannot install new one! please help

Please help me awhile ago i tried deleting then reinstalling th new version of itunes / quick time and after going through most of the installation process this comes up:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below.
Use source:
C:\Documents and Settings\Jordan\Local Settings\Application Data\Apple\Apple Software Update\
I made a picture of it here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
Then i tried uninstalling it (somehow it says its installed in add or remove programs) and the same message came up.
After ages of trying to figure it out and deleting heaps of things, when trying to install now it says:
1.run or cancel (thats not the problem) i click run picture here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
2.then it goes to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
3. then straight to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
without the the rest of the installation process...
SO i need to be able to delete it complety (the problem there is the .msi not being found).
Then install itunes / quick time without the .msi problem or the skipping of the installation process with it saying errors occurred ect...
Please help it would be much appreciated!
DJJORDIE

WHen you get trouble with msi files you usually need the Microsoft Installer cleanup utility.
Here is a method for removal of iTunes and related programs with clean up and reinstall.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

The TestStand Engine cannot be initialized. Path not found.

Hi, up until now i installed and removed TestStand 3.5 3 times in a row, just to always get this message (see subject) when i try to start the Sequence Editor. I even uninstalled all NI-Software i had on this laptop to reinstall the whole package... Nothing worked. Now i wonder, is there anything i am doing wrong ? What can i do to get TestStand running ?
Well, on that message when i hit OK, another message
The sequence editor cannot start up. Unable to create the TestStand Engine.
Hitting OK on that message again just terminates the sequence editor leaving me with a blank screen.
Any ideas whats wrong ?
best regards and thanks in advance,
Ingo
Solved!
Go to Solution.

Ingo -
Sorry for your frustration. Your idea to uninstall and reinstall should typically work. The second message is just a result of the first error, so we need to figure out what path is not found, and it is unclear why this is occurring. I tried to force my copy of TestStand 3.5 to fail in a similiar way by messing around with the installation and I could not find a way to cause the "Path not found" error. I got many other more detailed errors, but I have been unable to duplicate your message.
Some questions:
1) What operating system are you using?
2) Are you installing to the default location under Program Files? Are you using a network path in any way?
3) Do you have write authority to the the installation locations on you system?
4) Are you logged in as an administrator when installing, restarting, and launching the sequence editor.
5) Have you manually messed with any of the registry settings under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\TestStand\3.5, where something is incorrect?
6) Have you added any User components under the TestStand directory that might somehow load and cause an issue?
If you currently have an installation on the system, you could quickly try to clear out the Cfg directory under TestStand, so that it generates new copies of these files.
Message Edited by Scott Richardson on 11-20-2008 12:38 PM
Scott Richardson
National Instruments

APEX 3.1.2 install with sso, error "requested url ../plsapex/f.. not found"

Question: why is sso rewriting the url from .../pls/apex/f?p=.. to .../plsapex/f?p=?
Can anyone help?
Thanks.
Abstract: APEX 3.1.2.00.02 install with sso config, error "requested url ../plsapex/f .. was not found"
Situation:
Upgraded from Apex 3.0.0.00.20 to Apex Application Express 3.1.2.00.02
I get to my apex_admin and apex builder pages with url: [http://machinename:port/pls/apex] or
[http://machinename:port/pls/apex_admin]
When I try to access our application using no authentication scheme everything is fine.
But when I switch to sso authentication, somehow strangely the url [http://machinename:port/pls/apex/f?p=application_number]
is rewritten to sso [http://machinename:port/plsapex/f?p=application_number].
[https://test.insitehome.org/pls/apex/f?p=119]
reappears in browser as
[https://test.insitehome.org/plsapex/f?p=119:1:2095395898953485]
entries of select * from flows_030100.WWSEC_ENABLER_CONFIG_INFO$
"LSNR_TOKEN" "SITE_TOKEN" "SITE_ID" "LS_LOGIN_URL" "URLCOOKIE_VERSION" "ENCRYPTION_KEY" "ENCRYPTION_MASK_PRE" "ENCRYPTION_MASK_POST" "URL_COOKIE_IP_CHECK"
"HTML_DB:test.insitehome.org:443" "LS$XXXXXXXXXXXXXXXX" "6XXXXXXX" "https://testsso.insitehome.org/pls/orasso/orasso.wwsso_app_admin.ls_login" "v1.2" "0AXXXXXXXXXXXXX" "6FXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" "C2XXXXXXXXXXXXXXXXXXXXXXXXXXXXX" "N"
entries of select * from flows_030100.WWSEC_SSO_LOG$ showing ../plsapex/.. rewrite,
after trace turned on with SQL> @secdbg.sql;
ID MSG LOG_DATE
1259 entry: urlencode 15-DEC-08
1260 encoded URL is https%3A%2F%2Ftest.insitehome.org%3A443%2Fplsapex%2Ff%3Fp%3D119%3A1%3A1562268139343648 15-DEC-08
1261 exit: urlencode 15-DEC-08
1262 entry: urlencode 15-DEC-08
1263 encoded URL is https%3A%2F%2Ftest.insitehome.org%3A443%2Fplsapex%2Ff%3Fp%3D119%3A1%3A1562268139343648 15-DEC-08
1264 exit: urlencode 15-DEC-08
copy of last entries Apache log file
[Mon Dec 15 13:30:33 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 120704279613,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/plsapex/f
[Mon Dec 15 13:32:18 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 124999354851,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/favicon.ico
[Mon Dec 15 13:32:18 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 120704387543,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/plsapex/f
[Mon Dec 15 13:32:21 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 124999354854,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/favicon.ico
[Mon Dec 15 13:32:21 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 120704387663,1|http://forums.oracle.com/forums/] File does not exist: /u02/test_10gr2_hm2/Apache/Apache/htdocs/favicon.ico
[Mon Dec 15 13:32:25 2008|http://forums.oracle.com/forums/] error [http://client 172.17.241.64|http://client%20172.17.241.64/] ecid: 1229365945:172.17.241.64:23211:0:817,0 \nOSSO E09: No Oracle SSO support for POSTing data to protected resource yet.\n
[Mon Dec 15 13:35:09 2008|http://forums.oracle.com/forums/] error [http://client 172.18.5.120|http://client%20172.18.5.120/] [ecid: 107819660799,1|http://forums.oracle.com/forums/] mod_plsql: /pls/apex/wwv_flow_custom_auth_sso.process_success HTTP-404 \nwwv_flow_custom_auth_sso.process_success: MANY PROCEDURES MATCH NAME, BUT NONE MATCHES SIGNATURE (parameter names)\n
[Mon Dec 15 13:37:25 2008|http://forums.oracle.com/forums/] error [http://client 172.17.241.64|http://client%20172.17.241.64/] ecid: 1229366245:172.17.241.64:19598:0:70,0 \nOSSO E09: No Oracle SSO support for POSTing data to protected resource yet.\n
[Mon Dec 15 13:42:25 2008|http://forums.oracle.com/forums/] error [http://client 172.17.241.64|http://client%20172.17.241.64/] ecid: 1229366545:172.17.241.64:23157:0:832,0 \nOSSO E09: No Oracle SSO support for POSTing data to protected resource yet.\n

1. I am able to get to the SSO page. I am redirected to the sso page first
when unter the url [https://test.insitehome.org/pls/apex/f?p=119:1]
I am able to enter the username and password.
But once I click the login button I get the following message :
" Not Found
The requested URL /plsapex/f was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at test.insitehome.org Port 443"
2. The mod_osso.conf file was not changed for our Apex upgrade. The contents of the osso.conf file though are not readable.
I tried commenting out the
#OssoConfigFile /u02/test_10gr2_hm2/Apache/Apache/conf/osso/osso.conf
line in the mod_osso.conf file. url rewrite to ../plsapex/.. did not change.
Thanks.
Douglas
1. The contents of OssoConfigFile /u02/test_10gr2_hm2/Apache/Apache/conf/osso/osso.conf
^E~H/ôMæ~DÑ~I~PG^:~I| u^~T=Èi^V^OÜ.¦Â^PhW^AºÙ·G»?nÓ^MsF~C®Û¶åÌ4Ír^S)±~Y£µìø>oA~W~W~ÌÂ~W²E~^K^Yg~I#\^?^H~U^LÜ æiò
~ËîÁn^S~J@VI³^YªÞ~SÒüc¿ÿ|üw¶ï.Gl^X^U~N31p^Q©»$@~N¤Á_q0beÁ:Ô&ÙÇÁts^[ÓÔsJÌÖ~W£F^W~W^^è3Aµ^[¡>u^D|f^B~SèDÄ¦íþlýÄ^KÕæíUu^Gxg~--D^--^GuÑ-^PAÇ4^H^@Px«Ó^--`Gf^PuJxützþ<¸¡~JÛ¯ýa~^G~G^U^WSk÷u$ßâ´às~@8^Y¨,--^RË2ûçÁëÌó@¦½Jg£Ør^RCs<~@~RÙ·ßóÿÞN@ø0£~Gõr^S~N^R±½^_~W~\fÔ|óÀ^W~F~T^XO~PHvú|^F(·%"4Ýlâ~J¸~H^N0#dÀ¸O^H^@~S^FZN2ìzåäN^Xn[T~\(¥ôy"z~XY¶2~TTg^Yýãæ~V¸ÿ^VUs^B~Hë^S^Z3~A>nzr~[^SlÀ;~D~Hã½Zö~U^C
2. Browser headers- using "Live HTTP headers"
showing the change in the browser url from .../pls/apex/.. to /plsapex/..
[https://testsso.insitehome.org/pls/orasso/orasso.wwsso_home.process_signon?urlc=v1.2~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
GET /pls/orasso/orasso.wwsso_home.process_signon?urlc=v1.2~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
Host: testsso.insitehome.org
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: [https://test.insitehome.org/pls/apex/f?p=119:1]
Cookie: SSO_ID=v1.2~1~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orasso=9.0.3+en-us+us+AMERICA+5E6829A8119E1C0EE04011AC15F572DA+416E61A4441EBFF32F938E43B1C666B24FCDEED0AE4178FB7D0666DF2F8B242E83E304641F7BB27D2447D4235172D9FDAF1AF383E817CC68D3FAC8771CA0D15526CC58AFCA0862435154ABDA250A026D369DCCC3EC1DA333
HTTP/1.x 302 Found
Date: Fri, 19 Dec 2008 14:31:46 GMT
Server: Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server
Location: [https://test.insitehome.org:443/plsapex/f?p=119:1:4439918187386025|https://test.insitehome.org/plsapex/f?p=119:1:4439918187386025]
Set-Cookie: orasso=9.0.3+en-us+us+AMERICA+5E682B3E13BF540BE04011AC15F572DC+D7088454FEBAE9994BE0076646C00462FF614D0247361AC1D38957C467A4BD0B68508FA922065C7512D2DD7BC3BF02EE28F7281585308D54E0BCC5F3E3254F8DB6F3952C0C6D0F5B88B379B6686B1981F7DE4443A83FA03F;path=/;secure
Keep-Alive: timeout=60, max=1000
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: text/html; charset=UTF-8
Vary: Accept-Encoding
[https://test.insitehome.org/plsapex/f?p=119:1:4439918187386025]
GET /plsapex/f?p=119:1:4439918187386025 HTTP/1.1
Host: test.insitehome.org:443
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.4) Gecko/2008102920 Firefox/3.0.4
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: [https://test.insitehome.org/pls/apex/f?p=119:1]
Cookie: ORACLE_SMP_CHRONOS_GL=26:1229695773:876325; ORACLE_SMP_CHRONOS_LT=1229697115969
HTTP/1.x 404 Not Found
Content-Type: text/html; charset=iso-8859-1
Connection: Keep-Alive
Keep-Alive: timeout=5, max=999
Server: Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server OracleAS-Web-Cache-10g/10.1.2.2.0 (N;ecid=112453569346,0)
Content-Length: 326
Date: Fri, 19 Dec 2008 14:31:46 GMT
-----

When I try to install iTunes I receive the following error message: "Apple Application support not found".

When I try to install iTunes I receive the following error message: "Apple Application Support was not found".

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Old problem new angle:EXS24 instrument audio file not found -but its THERE!

So I know this has been posted on before, but I've read the forums and my problem seems slightly different.
Was trying to open tenor sax, or alto sax.
Created a new EXS24 track. In the Logic Studio Library it comes up with a long list of folders, bottom is '12 Legacy Instruments', inside that all there is is '05 Horns and Woodwinds' and '08 Drum Kits'. I go into Horns and Woodwinds, there are my instruments. When I click them it says not found.
I checked in my finder window, (application support/Logic/Sampler Instruments/ 12 Legacy Instruments/05 Horns and Woodwinds). They ARE there. So that baffles me.
Now, someone said on another forum its because they arent in the right place and SHOULD be in garage band (application support/garage band/Instrument Library/Sampler/Sampler Files/12 Legacy Instruments/05 Horns and Woodwinds), so I copied them from the previously described Logic destination to there.
They STILL aren't working. It seems like Logic is looking in the right place but it says it cant find them?!
Please help!
(P.S - Annoyingly if it comes to reinstalling Logic Studio, I don't think I can do that. I bought my Mac Mini off ebay, and have forgotten the admin password, and have no OS discs to reset it. So until I can do that, I can't install anything (as you need the admin password. Any solutions that don't involve reinstalling Logic gratefully welcomed!)

What I think you have to do is refresh the Spotlight index. Open the prefpanel Spotlight, go to the Privacy Tab, put all your disks on it (just drag 'm), close the panel, reopen it, remove the disks, close the panel, let your Mac sit for an hour or so while it is creating Spotlight indeces from scratch. Use *Activity Monitor* to check if Spotlight is done indexing. If you see MDS or MDWorker still active (=using CPU), it is not done.
O and BTW, you should create an account for yourself of which you do have the admin password, or you will not be able to solve many possible problems.

HT1925 cannot install upgrade because old Bonjour components cannot be removed Bonjour.msi not found

Similar Messages

Maybe you are looking for