HT1925 cannot remove bonjour and itunes wont re-install because of it
cannot remove bonjour program from old itunes when trying to update itunes by uninstalling and re-installing itunes 10.7
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Similar Messages
-
Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.
" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I cannot remove albums and playlists from my iPhone; I deselect them in iTunes, but they remain. I can add new albums and playlists
How did the photos/albums get onto the phone ?
Only photos taken with the iPhone or saved from emails/websites etc can be deleted directly on the phone - either via the trashcan icon at the bottom right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it top right in thumbnail view. Albums that you've created directly on the phone can be deleted via the Edit button at the top right of the album selection screen.
Photos/albums that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing -
Why am i getting an error message saying new itunes library and itunes wont start up
every time i try to start up itunes an error message comes up saying new itunes library and itunes wont start up. I have no idea why this has happened as I havent used itunes in ages and havent knowingly changed anything since. does anyone have any ideas what the problem is. the last software update i got was in december
Go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
tt2 -
i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
And if necessary
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Windows Vista cannot find bonjour and it won't allow me access to my ipad.
For some reason my Windows Vista cannot find bonjour and it won't allow me to do anything on my ipad. If I reinstall itunes will that work? If I update itunes will that work?
Please Help....
Thanking You in advance,
FrankieHi Frankie,
This article covers how to check if Bonjour is installed correctly and how to reinstall if it's not:
Bonjour for Windows: How to tell if it successfully installed
http://support.apple.com/kb/HT2703
Cheers!
- Ari -
My home button is broken ipod touch 5th generation and wont open and itunes wont recognize it
my home button is broken ipod touch 5th generation and wont open and itunes wont recognize it
Turn on without Home/Power Button
-
pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..
Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L -
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
My ipod wont start and itunes wont recodnize it, what happened and how do i fix it?
I recently went to: settings, general, reset, and erase all data and settings, now my ipod wont start and itunes wont recodnize it, what happened and how do i fix it?
- After being connected to a charging source for half an hour, reset the iPod and then connect to your computer and it if appears in iTunes restore the iPod via iTunes.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
i just goyt my ipod touch 5th generation three days ago and left it in my bed with my screen down and itunes wont read it and it wont charge what do i do??? please help me
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and won't me install or run itunes anymore help me fix it.
MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
-
Have old PC with Vista, loaded new version of iTune now I have DEP issue and iTunes wont load. Is there a way to download on old compatable 9.0 version of iTunes or is there a workable Dep fix?
You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac
-
I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Using the Previous Row in a Calculator Formula
Hello. I am using the calculator to create a new channel that is a custom filtered version of an existing channel. Unfortunately, I have not been able to identify the previous row entry in the channel. To make things easier, let's say my filter is
-
Since updating my iTunes I no longer have any controls. iTune covers the entire desktop and I cannot add from my files. Prior to updating I had a perfectly good iTunes which would allow me to stories for including on a iPod. Can anyone please advi
-
PO item level validation if create with ref to contract
Hi Pl help me to fulfill the following client requirement: When user create the PO with ref to contract , system fetch the all data from the contract to PO at line item level, but in the PO, user is able to change the contract line item rate. Now con
-
I am using Dragon for Mac and it is not supported under the current Mac OS?
I have been using Dragon for Mac for some time. But it no longer works because Dragon for Mac is not supported on the new OS. How do I use Dragon for Mac on the current version?
-
Right Click Tools - not appearing!?
I downloaded and installed Right Click Tools from here: http://psrightclicktools.codeplex.com/ They installed and I can see D:\Program Files\SCCMConsoleExtensions, my ConfigMgr is installed in D:\Program Files\Microsoft Configuration Manager as well.