HT1925 error 1604, cannot restore iPad

Error 1604, cannot restore!

Check out this Apple article -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Are you able to restore the iPad from Recovery Mode or from another computer?

Similar Messages

  • HT201210 getting error message cannot restore ipad disk space full ???

    cannot restore the ipad  its locked up and I am getting an error message that says cannot restore ipad disk space full what to do?
    thanks

    Well you are going to have to delete something to make room

  • TS3681 I cannot restore ipad passcode due to network settings?

    I cannot restore ipad it says your network timed out or check network settings

    Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

  • I am having iPod classic 120GB Serial Number:8K913VF:2C7 I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1

    I am having iPod classic 120GB Serial Number:8K913VF:2C7
    I have tried a newer version of the iPod software is available (version 2.0.1). To update my iPod but it is showing error iPod : Cannot restore or update in iTunes with error 1415, 1417, 1418,1428,1429, 1430, 1436, or 1439.
    How I can obtain suitable software for iPod classic 120GB Serial Number:8K913VF:2C7

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • I am setting up my Iphone 6 but keep getting an error message "cannot restore backup from Icloud...I backed up my old Iphone 5 just yesterday...Any suggestions?

    During setup of Iphone 6 I keep getting error message "cannot restore backup" from Icloud.  I backed up my old Iphone 5 yesterday.  Is it because of different operating systems? Please help. Thanks!

    Does your iPhone 5 IOS is later than iPhone 6 IOS?
    If true, you need to update your iPhone 6 before you can restore from your backup.
    If not, is iPhone 6 connected to power supply?

  • Error 29 cannot restore phone 4s

    error 29 cannot restore iphone 4s after update to ios7

    Error 4005 fix for Windows 7
    iOS: Restore errors 4005, 4013, and 4014
    iphone restore 4005

  • Can anyone help? When I sync ipad and it asks me if I wish to continue to restore an error occurred while restoring ipad (-50)

    Help!!
    When I sync my ipad with itunes it asks me if I wish to continue restore, when I click continue it comes up with an error message:
    "An error occurred while restoring ipad (-50)
    Can anyone assist?
    Thank you in advance.

    are you trying to restore defaults through itunes?
    try rebooting the device and try it again.  this usually works.  memory is required for it to restore.

  • Cannot restore ipad mini.  Not enough room

    I had an ipad mini model A1432 (16gb) that had a cracked screen.  I bought a second ipad mini (open box but seemed unused), same A1432 model and tried to do a restore so that it could be used while I fixed the first unit.  Both have OS 7.04.  Itunes is telling me it cannot do the restore becuase there is not enough memory on the new ipad.  The old ipad backup was under 14.5GB so what gives?  It does not tell me there is a problem with the new ipad and I have confirmed the models on the back of the ipads.
    I tried doing a fresh install of the OS (restore iPad) in the hopes that if there was any legacy files from the previous owner who must have gotten it for christmas, would be wiped out.

    Further to my question.
    I am able to do a restore.  Takes 15 or more minutes and reboots but then I get the same response when I try to restore what should be a 14.5GB backup.  Everything appears to restore properly so I should expect that I would easily have enough room to do the "Restore from this backup:"
    Do I have to initialise something or do some steps first?  it seems to want me to setup my wifi and other details but I should be able to do the backup as that is what it is for.
    The exact wording of the error:
    "iTunes could not restore the ipad "Nichole's iPad" becasue not enough free space is available on the iPad."
    I only have the option of saying "OK"

  • I cannot restore iPad 3 from a copy on iTunes

    I have iPad 2 and iPad 3. I needed to copy everything from iPad 2 onto iPad 3, including folder organization.
    So, I made a copy of iPad 2 on my PC using iTunes.
    Tried to restore iPad 3 (it has the same Apple ID) from the iPad 2 copy.
    iTunes starts the recovery procedure and says "30 sec left", "1 min left"..."30 min left". Then it fails and says smth like "iTunes cannot recognize the iPad". Connection is lost.
    I did it many times with the same result.
    Reinstalled iTunes.
    Stopped and restarted Apple Mobile Devices service in Windows services.
    Tried to restore the iPad from iTunes again and again.
    It's always the same "30 sec left", "1 min left"..."30 min left", failure. Connection is lost.
    I recovered initial iPad 3 manufacture settings. Successfully.
    Tried to restore the iPad from iTunes again and again.
    It's always the same "30 sec left", "1 min left"..."30 min left", failure.
    I finished with a try to restore from iPad 3 copy.
    The same failure. Connection is lost.
    Many hours are spent on this already. It doesn't look like "plug'n'play".
    What should I do next?
    How to manage the issue?
    Thank you.

    Now I am consiastently getting error 11.

  • HT5654 cannot restore ipad

    iPad is stuck in restore mode, iTunes detects this but after extracting files I get the error cannot detect iPad.

    Disable any security software on the computer, then try again.

  • Cannot restore iPad mini from iOS 6.1 to 6.0

    I backup my ipad mini while have ios 6.1.3, and now i bought new ipad mini and need to restore that backup to it but it have ios 6.0 and i'm not able to restore lack of ios maybe..
    Any one have any idea, and if i update my new ipad mini with ios 7 will i be able to restore from ios 6.1.3 backup??

    adashti wrote:
    I backup my ipad mini while have ios 6.1.3, and now i bought new ipad mini and need to restore that backup to it but it have ios 6.0 and i'm not able to restore lack of ios ...
    Correct. You cannot Restore to a lesser version ( iOS 6.1.3 to iOS 6 )
    adashti wrote:
    ... if i update my new ipad mini with ios 7 will i be able to restore from ios 6.1.3 backup??
    Yes.

  • 1. nothing synced. 2. the iPod error 1415 cannot restore.

    HELP!!
    My iPod has done this for about a couple months or so now and I can't take it anymore!
    I got the new Lady Gaga album, The Fame Monster. I uploaded it to my PC and it was able to sync all of the songs but the last one. I tried to unplug the iPod then plug it back in but that reallt didn't help at all. So I thought it would be good to restore it and everything would be fine. I restored it and started to resync all of my songs. What happens is that nothing can fully sync and I had to take the iPod in and out and then it ended up saying it couldn't sync so I didn't know what to do. I restored it again and the error 1415 pops up saying that it cannot restore. So, I have a problem. How can I get my iPod to restore and how can I get all the songs to sync on it without having it stop and sync in chunks or mess up again?
    Please help!!

    Just doublechecking, Samra. In the course of your troubleshooting to date, have you worked through the following document?
    [Error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439: Cannot restore or update iPod in iTunes 7 or later|http://support.apple.com/kb/TS1372]

  • Iphone Error 1480 Cannot Restore

    So I forgot my password to my iphone, and cannot restore. When I try to restore, it says "error 1480." I'm unsure about what this is and cannot find on the forums what exactly this error is. Please, can anyone help me.

    So I forgot my password to my iphone, and cannot restore. When I try to restore, it says "error 1480." I'm unsure about what this is and cannot find on the forums what exactly this error is. Please, can anyone help me.

  • Cannot Restore iPad Mini Wifi Error 9

    Tried all suggestions to no avail, have to replace the Digitizer glass anyway, so what else could i try when it's open...? Full description ...
    Windows 8.1 connected to Internet via Ethernet Cable
    Installed Latest itunes, d’loaded iPad2,5_7.1.1_11D201_Restore
    Firewall off
    Defender Realtime Protection off.
    Successfully entered DFU Mode (Blank screen)
    ‘Detected iPad in Recovery’
    Hit ‘Shift plus Restore’
    Select ‘iPad2,5_7.1.1_11D201_Restore’ from iPad Software.
    Choose Erase and Restore.
    ‘Extracting Software’ Screen blank.
    ‘Preparing iPad’
    ‘Waiting for ipad’
    ‘Verifying’
    During the last three steps the Apple logo appears on the screen with a rotating timer and a white progress bar. The Windows Sound when USB devices are installed/removed is heard several times, before the screen goes blank then the Unknown Error (9) message appears, and the screen reverts to the ‘Connect to PC’ screen
    Any help warmly welcome...

    Hello there, Didger46.
    The following Knowledge Base article offers up information on the exact error message you are seeing:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#9
    Particularly:
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Cannot restore iPad Mini error 2003 unknown

    When trying to restore my iPad mini, I did everything suggested by articles from Apple without any succes
    Always ending with this popup
    "The iPad "iPad" could not be restored.An unkown error occurred (2003) "
    Please Help Me

    Check the "Error 2000-2009" section here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

Maybe you are looking for

  • Sudden onset issue with eprint & enabling any app or web services

    Hello everyone, I have a case in with HP, and have spent 4+ hours on the phone with the eprint support folks and the corporate support folks. Unfortunately they are now gone for the weekend, and I am still stuck here with a nonfunctioning system - an

  • Appraisal workflow in UWL

    Hello all, I am trying to create a new view in UWL for appraisal workflows. My requirement is to get the Appraisal workflows into UWL. However, when appraisal item is selected from UWL it should not take us to the appraisal form, instead it should di

  • BindingError while deploying an ear module on Websphere 6.

    I have an ear module which has following contents. a war module a jar module META-INF folder contains application.xml, ibm-application-bnd.xmi and was.policy. When I install it on Websphere 6, I am getting the following error. com.ibm.ws.management.a

  • PCI-6013 intermitant bad counts good after hardware reset

    I am using a PCI-6013 board to two edge separation counting into 10 bins over 1 second.  Most of the time the counter works great but some of the time I get garbage data eg 0,6050955,6050951,0,6050944,6050954,0,6051007,0,6050951.  The counts are comi

  • Messed up old Pages documents?

    When I open previous Pages documents, they are a mess. Graphics are gone and the text boxes are wrong. Is there a fix?