HT1925 windows 64 installer wont load on 8

Is anyone else having trouble downloading iTunes to windows 8. The installer downloads then wont open. Suggestions?

The installer downloads then wont open.
Are you getting an error message when you try to run the installer? If so, what does it say? (Precise text, please.)

Similar Messages

Windows Installer Wont recognize partition

Hi people,
I partitioned my Hard drive through boot camp with out any problems (the partition for BOOT CAMP is 20 gb)
When I go through the windows installer it only sees the one partition for the entire drive it is called untitled
Im not sure if i have the SP2, the disc is an MDG branded(that may be my problem) but doesn't say SP2 on it anywhere,
Please help me with this

Hi Paul,
to check if your XP CD is containing the SP2, you can look at the root directory of the CD for a file named 'win51ip.sp2'.
If it is there then SP2 is included if not, you can follow these instructions for 'slipstreaming' the SP2 http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
I am not sure, what 'MDG branded' is, but it could be that the CD is not a single full installation CD but rather a 'Recovery-CD' which only works with the computer it originally came with.
Stefan

Windows ME wont load

After installing a new Seagate 40GB drive and formatting etc and transferring the old system from my old drive to the new one, WInmE wont load error message NTKERN failure???

Give complete PC specs. includding P.S. brand and AMPS. it gives to 3.3v. 5v. and 12v.

Bios flashed, rma, windows still wont load

Evening,
I flashed with live update (yes i know now..) and it went wrong. Board, P55-cd53, sent to MSI who reprogrammed it. Unfortunately windows wouldnt load. I think i have tried every described method posted here, even flashed back to the old version, to no avail. I even tried a boot dvd with ubuntu but even that OS wont run (either with or without installation). The pc simply reboots when trying to execute these commands.
If i were to replace any hardware: what would it be?
System specs
P55-CD53
intel i5 750
ocz-gold-low-voltage-ocz3g1333lv4gk
Msi hawk 5770
Samsung spinpoint f3 500gb
Cooler master real power M520
Thanks,
Harry

Quote from: Svet on 10-October-10, 16:16:23
Before this bios flash it was worked fine?
I was having regular BSOD, especially when leaving the pc on overnight. Other than that everything worked fine.
Quote
Do >>Clear CMOS Guide<< with power cord removed.
Then Load BIOS Defaults
I did this before sending it back to MSI. I haven't done this after i received the mb back from MSI. Will try today.
Quote
Check memory voltage in BIOS setup, you may need to apply voltage recommended by your memory vendor for your sticks
Also do check with >>Memtest86<<
Memtest came with the Ubuntu-disc. I ran it and the Memtest results were shocking. I only did 5 runs but received thousands of failures.
I will replace the OCZ rightaway instead of finetuning them in BIOS.
Also adressed to Jack: Would the G-skill F3-12800CL9D-4GBNQ be a good choice? Right out of the box without adjusting anything inside BIOS?
Quote
Else reinstall OS
So far i haven't been able to reinstall or repair (from disc and usb) my windows 7 at all, not even Ubuntu.
System just keeps telling me 'the ntoskrnl is missing or corrupt' and keeps doing restart loops.
Would replacing the DRAM solve my problems likely or would it cost me a new MB or HDD too (if al else fails)?
Thanks,
Harry

Installing software on my Mac Air & MBP - installer wont load

Hi all
I am hoping some one is technically savvy enough to help me trouble shoot this problem. I recently purchased a new digital camera and am trying to install the software disc that came with the camera. I unfortunately need to install the software disc so that it loads the necessary files for me to process the raw digital files that came out of the camera so using things like iphoto etc is no good for me.
The issue I have is when I double click the installer it momentarily flashes up and then disappears???? I cannot figure out WHY?? So I have tried to trouble shoot as best as possible. Here is what I have done and results to date.
1. Tried to Install this on my MacBook Pro. Installer flashes up momentarily and disappears?
2. Tried to install this on my Mac Air also running OS X Snow Leopard. Same issue?? So far conclude its not machine related
3. Downloaded another install disc off the internet and tried to run that version. Same ISSUE. So its not issues related to my CD.
4. Stripped out previous versions of the software on my MAC Air to ensure its not causing issues. Same problem
5. Checked online forums and other uses and purchasers of the digital camera ARE able to install the software on their macs!!!
6. Uninstalled every single APP that I have installed on my MAC air and tried to get it back to stock. Try again. Still fail????????
7. Updated the OS X software to ensure everything is up to date.
8. Grabbed the OLD version of the software disc that came with my previous digital camera (same brand) and installed that CD (version 23 - for those familiar with Canon DSLR). that loads up correctly and allows me to install. Version 25 the latest that comes with my new Canon DSLR doesnt load up.
I am stuck !!! I cannot pin point the issue. I dont understand OS X enough to debugg or log what the potential issue is.
I started up the Activity Monitor and watched closely in the my Process specifically for the process that I start up (SetUp)
I noticed that the Setup process name registers. Then another process starts up UniversalInstaller then both of them disappears?????????? and nothing happens in my comp!!!!!
Is there some way for me to debug this ?? look at log file?? enable error logging or has ANY one got any idea what may be the issue???
I've essentially bought a VERY VERY expensive DLSR and I cannot edit my raw files because I cannot install the software!!
HELP ME Please

Downloading as we speak, and the first explanation that comes to mind is that both files have a .rar extension, and that since OS X doesn't support this archive format, you need to install a third-party utility to open them.
One files tool to open .rar files is The Unarchiver (here), and another is Stuffit Expander (there). 7zip also proposes a Mac version (here). All three will decompress a .rar file, and let you access the .dmg file(s) inside.
Also, depending on the browser you're using, and provided you might be inclined to open trusted files directly (I use Opera, and seldom save safe download; I click on "Open" in the download dialogue), your files could very well open... in the browser cache folder, out of sight. But if you use Safari, Chrome or Firefox, and you don't have any utility installed to handle .rar files, that's doubtful. I'm going to open your files now, and check if I can install them.
Stay tuned!
Edit: decompressing the first file using The Unarchiver shows that the archive is "incomplete". Which leads me to think that you might have to concatenate the two files to make one "complete" .dmg file.
If so, once they are decompressed, open a Terminal (in Applications/Utility), then type "cat", and drag both files in the window, one after the other (preferably in the right order...), type a space, then give the final file any name you want, followed by the .dmg file extension:
(e.g.:) "cat /Users/Your_Name/Desktop/File1.dmg /Users/Your_Name/File2.dmg /Users/Your_Name/Desktop/FinalFile.dmg"

Dreamweaver CS4 on Windows 7 wont load. Error NTDLL.DLL

Hello,
Randomly, Dreamweaver started crashing on startup a month or so ago. I tried uninstalling/reinstalling it & the entire CS4. But no luck. I tried the default print trick, and it didn't work either. I can't figure out any other solution. Please help!
Windows Error Log :
Log Name:      Application
Source:        Application Error
Date:          6/13/2010 9:24:01 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Nu-top
Description:
Faulting application name: Dreamweaver.exe, version: 10.0.0.4117, time stamp: 0x48c874b4
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdb3b
Exception code: 0xc015000f
Fault offset: 0x00084401
Faulting process id: 0x1a04
Faulting application start time: 0x01cb0b68a4244f94
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: e45cf5ba-775b-11df-b771-dc3f571bfbcd
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-06-14T02:24:01.000000000Z" />
    <EventRecordID>9253</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Nu-top</Computer>
    <Security />
</System>
<EventData>
    <Data>Dreamweaver.exe</Data>
    <Data>10.0.0.4117</Data>
    <Data>48c874b4</Data>
    <Data>ntdll.dll</Data>
    <Data>6.1.7600.16385</Data>
    <Data>4a5bdb3b</Data>
    <Data>c015000f</Data>
    <Data>00084401</Data>
    <Data>1a04</Data>
    <Data>01cb0b68a4244f94</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe</Data>
    <Data>C:\Windows\SysWOW64\ntdll.dll</Data>
    <Data>e45cf5ba-775b-11df-b771-dc3f571bfbcd</Data>
</EventData>
</Event>

Hi
This is reporting a problem with your windows 7 installation not the dreamweaver installation -
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
You could check the installation problems on this page - http://forums.adobe.com/thread/417116.
PZ
www.pziecina.com

Authorware on Windows 7 wont load

Hello, im using Windows 7 Home version, when i go to play an Authorware Website it shows me an "error loading", i have tried in IE 8; Firefox, Google Chrome and Netscape, all give the same error.
I have run IE8 as Administrator and added the website to trusted websites, didnt work also.
That site works in Windows XP fine!
Screenshot:

Here's what I do when looking through trace files:
Every instance of SHOCKTRACE BEGIN is a new session the user launched. The ptrace file keeps building as long as the shktrace.on is present.
There are 7 lines of PluginMgr::Init, the version of Web player should be 2004.0.0.0 The rest of those 7 is more informational.
A few lines down from there is the location of the aam file... verify that's correct.
In places where the end of the line lists sts it should be 0. Anything other than 0 is an error of some kind.
Read through the lines where the map file is parsed... check the version number in the map, check that all the lines got through, check that the correct PLR line is present. If a PLR line is not present then it defaults to the full player downloaded from download.macromedia.com
Check the line for BypassSecurityDialog... if it's set to true then you won't see the dialog and you won't have the opportunity to set the file as trusting and it won't download files.
Look for SecurityMgr::SetSecurityMode to see that it's TRUSTING
After the processing of the map is a similar routine with the manifest. Then the processing of each of the file downloads. Each of those is the same starting with opening the url, followed by one or more writes to the disk and ending with a destroy stream. Downloading does two at a time. Since you see an error in launching the webplr.exe I'd search for all the lines with that text and make sure the file is being downloaded. If it is being donwloaded and it won't launch then double check the setting of the trusted site in IE. If it's set correctly then it should automatically turn off protected mode in the browser. If it's not being downloaded then perhaps you don't have write permission to the destination folder (I doubt that's the case unless your on a corporate machine with tight user priveleges).
Hope this gets you going in the right direction. Please report back on how things go.
Mike

No OSX installer will boot on Mac Pro from any drive (grey screen), but Windows installer does...

Greetings,
Neither OSX 10.5 (shipped with my Mac) or 10.6 disks will start on either of my Mac Pro dvd drives. They will not run from my Macbook (Mac Pro on firewire target mode) either, nor from a partition on the Mac Pro HDD. They always go as far as the grey logo screen with the spinning wheel, where they get stuck.
Verbose mode will display the following lines where it gets stuck:
DSMOS has arrived
Warning - com apple.driver.InternalModemSupport declares no kernel dependencies; using com.apple.kernel.6.0
Then it lists two ethernet addresses and nothing else.
I have reset the PRAM about a hundred times in the last days. Same goes for the SMC, well, maybe only a dozen times this one... I have run fsck, too.
I can no longer run the hardware test on the install disk 2, but when I still could a couple of days ago, all was reported fine.
BTW Windows installer will load though... What is going on here?!?
Any suggestion (other than suicide, yet anyway!) would be greatly appreciated.

Windows won't give a kernal panic or BSOD because it is a Mac related hardware issue.
If you can't boot from CD/DVD:
http://www.macfixit.com/article.php?story=20050311073316780
What resetting NVRAM does:
http://devworld.apple.com/qa/qa2001/qa1103.html
Your asking about a Mac Pro, but those are not "G5" and the OS can't be transferred between PowerMacs and Mac Pro.... are you sure we are talking about only Mac Pros?
Putting XP and Mac OS on the same drive, that doesn't strike me as what one would do; keep them on different drives.
And, if they are on the same drive, then you really haven't reformatted the drive, which would involve wiping any and all partitions, and then creating your Mac Standard (HFS+ Journaling) and backup XP with WinClone or install it to another drive.
I don't have trouble with Windows, but I do with the Boot Camp Assistant and drivers.

Quicktime wont load because the installer thinks I have a newer level quicktime installed already.

quicktime wont load because the installer thinks I have a newer level quicktime installed already. Thus the newest level of iTunes and quicktime will not install, help... Thanks.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Restart the PC, and try another install. Does it go through properly this time?

Hp deskjet 1010 wont load on windows vista

driver wont load for deskjet 1010 on windows vista

The full solution software includes everything you need to install and use your HP printer. This collection of software includes the complete set of drivers, installer and optional software.File name: DJ1010_188.exe Alternately, The HP Printer Install Wizard for Windows was created to help Windows 7, Windows 8/8.1, and Windows 10 users download and install the latest and most appropriate HP software solution for their HP Printer.
Simply run the tool and follow the on-screen instructions.
File name: HPPIW.exe

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

Itunes wont update to 10.5 due to problem with windows installer package, any help?

Trying to update my itunes to the newest version 10.5 but stops and tells me "there is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
so i tried to uninstall and download from site and still got the same error..
then tried a system restore to get my old itunes back and now the Itunes icon wont do anything...
Windows support wasnt much help either..
anyone? please?

the link from d6d24r94 who was the first person to respond fixed my problem. heres the link ---->
http://apple.com/itunes/download

New version wont load..Message Error 7 - Windows error 126

new version wont load..Message Error 7 - Windows error 126

Any update on this???? Still having the same problem.

Latest version of Itunes wont load.. Keep getting message Error 7 - windows error 126???

latest version of Itunes wont load.. Keep getting message Error 7 - windows error 126???

Any update on this???? Still having the same problem.

When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried rein

when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried reinstall deleting files signing on with another account etc nothing works I have read this is an apple programing problem if so is there a fix I need iclouds thanks

This other discussion may help: Re: how do I install icloud

HT1925 windows 64 installer wont load on 8

Similar Messages

Maybe you are looking for