HT1926 Cannot install due to invalid drive H:

Trying to install iTunes again.  Install halts with error saying invalid drive H:  I dont have a drive H:.  Had iTunes installed but it no longer works.  How do I get iTunes to install?  Windows XP system.  Installing itunes for Windows.

Mmmmhmmm. Well when your computer is running through the installation preparation screens, there should be one where it will ask you where the location is you want iTunes to be loaded into. Change it to drive C. That SHOULD do it.
To be honest...I wish I had a Mac. Seems like they are much more reliable.
Windows XP

Similar Messages

  • When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having.  https://discussions.apple.com/message/17374864#17374864

  • Cannot install HP Photosmart 2610 Driver with windows xp

    cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

    Hello, 
    Please check if you have an ADMIN rights to log into your PC.
    Else, create an ADMIN user account and then run the installation ,
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • ITunes 7.3.2 won't install or uninstall - "Invalid Drive: F:\"

    I can't install the new iTunes. Every time I try, the program pops up "Invalid Drive: F:\" and shuts down. I get the same error message when I try to uninstall it. As of right now, I can't use my iPod or iTunes because they aren't up to date. Please help!!!

    Mine is doing the same thing & I've done so many things on here that people say will fix it & it doesn't. I'm scared I'll do something wrong & lose all of my music. I really need help as well with this!

  • Cannot install latest Catalyst Graphics Driver for w500 under Windows 7 RTM 64 bit

    Hi,
    I cannot install the latest ATI Catalyst driver (9-9_beta_win7_64_dd_CC)) for the ATI Mibility Radeon 9650 graphics card.
    Felet uppstod i programmet med namn: InstallManagerApp.exe, version 3.0.741.0, tidsstämpel 0x4a84bcd2
    , felet uppstod i modulen med namn: ntdll.dll, version 6.1.7600.16385, tidsstämpel 0x4a5be02b
    Undantagskod: 0xc0000005
    Felförskjutning: 0x000000000006f31e
    Process-ID: 0x468
    Programmets starttid: 0x01ca369873fa09f5
    Sökväg till program: C:\Drivers\Graphics\ATI\99\Driver\Bin64\InstallManagerApp.exe
    Sökväg till modul: C:\Windows\SYSTEM32\ntdll.dll
    Rapport-ID: be82a3f1-a28b-11de-bfc2-0022680b4311
    If i run the following command from an administrative command prompt (bin64): atisetup -install -output screen
    The installation will seem to succeed according to the repot but Windows sticks to Standard VGA adapter and the annoying "ATI Mobility Radeon HD 3650 (Microsoft Corporation WDDM 1.1) " Driver.
    Have anyone been able to install the Catalyst driver and get an external monitor to work?
    regards
    Michael

    Hi @dazed1 ,
    I see by your post that you need the drivers for Windows 7 Pro 64 bit. I would like to help.
    I checked the website and there is a Full Feature and Basic driver available for Windows 7 64 bit.  HP LaserJet 1022n Printer Drivers. Did you try both of these drivers?
    I would try and install the preinstalled Windows drivers, if you are having issues using the downloaded drivers on the site with your Windows 7 Pro 64 bit. Run the Add a printer wizard from Devices and Printers.
    You could also plug and play the drivers. Connect the printer to the computer and see if Windows will detect the printer and install the drivers automatically.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Cannot install Realtek HD Audio driver! HELP!

    Hi Everyone,
    I'm running into a big problem with my Realtek HD Audio setup. After windows installation, it's got the typical Legacy codecs etc and "Audio Device on High Definition Audio Bus" with a yellow exclamation mark. None of them has any drivers associated with it. Funny thing is, I cannot uninstall any one of them. All the Leagcy stuff has no uninstall option, the High Definition Audio Bus does have an uninstall option, but it does absolutely nothing. Install new driver, it won't allow that either. Clicking on them does nothing.
    I got the latest setup driver from Realtek and tried to run it, it gives me the "Install Realtek HD Audio Driver Failure" everytime. And I have already installed the UAA. (KB888111)
    Finally I found a way to uninstall all of the Legacy codecs etc except the Auido Device on HD thing. Restarted the computer hoping windows will try to reinstall, nope, cannot find anything. So now I'm left with only the Audio Device on HD Audio Bus.
    When I disable the HD Audio from the BIOS, it leaves me with no Sound, Video, and Game Controllers. So it only shows up when I enable it in the BIOS, and yet I cannot install a new driver or uninstall it, though I can "disable" it . I can also get into Properties and there is no drivers. Please help!
    MSI P35 Neo2-FR BIOS 1.6
    C2Q Q6600
    2x320 Maxtor in Raid 0
    eVGA GeForce 8600GTS 512MB
    Corsair XMS2 with DHS 2x1GB
    Windows XP w/SP2
    Hope I'm not missing any info. Thanks!
    Frank

    just thought i would add my experience to this thread on th eoff chance that it saves someone the headache i've just been through. Admittedly though it was my own lack of thinking (aka 'beer') that was the problem in the end.
    So...
    I decided to do  fresh install of XP +SP3
    All went smoothly except i could not get HD sound. Looking on google and this forum it seemed there was some problem with SP3 and the realtek HD drivers, so i spent ages playing around install and uninstalling the audio drivers in different orders to try and get the damn sound to come out through my HD TV. Normal sound through the stereo jack was working, just not the sound through the HDMI cable into my TV. (YOu might have already guessed now what silly mistake i was making). I also found an audio device in Device manager that i could not find any drivers for.
    Anyway, the answer was that the device i needed was the nought to do with my MSI motherboard, but the audio output that goes through the HDMI cable on my gfx card. I can't believe i spent so long trying to get HD sound and all i needed to do was update the mysterious audio device with ATI drivers (which windows could do automatically once i'd installed the ATI gfx drivers). Serves me right for trying to do a fresh install after a belly full of beer. idiot.
    All working fine now.

  • HT1926 Cannot install itunes Error 7, windows error 1114

    Cannot instal Itunes, Error 7, window error 1114 ???

    Hi!! I finally found a solution
    I´m Sure this one will work for everyone
    -First you have to uninstall all Apple Software using Control Panel
    -Download Unlocker Software from softsonic heres the link http://tinyurl.com/3e8gj2h
    or google it
    -Install Unlocker
    -Go to Start and type this in search: %programdata% 
    -ProgramData window will open, so find apple folders
    -Right click in each apple folder and find Unlocker in the options
    -Choose Delete each apple folders (with unlocker program)
    -Go to My PC, C Local Disk and find Program Files
    -Look for Apple folders and Delete them (with Unlocker)
    -Find a Folder (in Program Files) called Common Files
    -Delete all Apple Folders (in common files) with Unlocker
    - Empty your trash can (thats what i did)
    -Reboot
    -Install Itunes
    Note: You can Reboot or use Safe Mode to use Unlocker if it doesnt work.
    ....and that's All
    AFTER Days of frustration LOL
    Good vibe, Love and Blessings for all!!
    Jorge from Mexico

  • Cannot Install Embarcadero Interbase odbc driver on windows 2012

    Hello 
    I am trying to install Embarcadero Interbase odbc driver on a windows 2012 server. But the installer does not load the file into system 32 folder which should contain the DLL for the 64 bit driver. The 32 bit dll goes correctly into syswow folder and the
    driver works. Even if i try to copy the dll from a windows 7 machine and register it succesfully using elevated permissions .The driver shows up under 64 bit but does not load the database. I feel something is off with the permissions on system 32 folder under
    windows. Any help is appreciated. Thanks.

    Contact the application vendor.  This is not a Windows issue but an application issue.  If they do not support running on 2012, there may be nothing you can do.
    . : | : . : | : . tim

  • Cannot install apple mobile device driver

    Every time I Attempt to install Apple mobile device driver I get this messasge

    Hi Dw,
    See #5 in the attached link. Make sure you are downloading the correct version for your Windows Operating System type:
    http://support.apple.com/kb/TS1538
    Cheers,
    GB

  • HT1926 Cannot install ITunes v11.1.3

    Cannot install ITunes, I'm having Win7, when I try to install the setup, it goes half way and says no network connection, but I'm connected to internet.

    it goes half way and says no network connection,
    What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

  • Cannot install DVD/CD ROM drive after upgrading from Windows 7

    I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
    ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

    Hi,
    The error code 31 means that Windows cannot load the drivers required for this device.
    Considering that this issue mostly can be caused by compatible issue.
    Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
    mode to install.
    If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
    dvi:             Rank         - 0x00000000
    Then, corresponds the score in this link:
    Identifier Score
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
    The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
    The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
    Thanks for your understanding.
    Kate Li
    TechNet Community Support

  • Itunes will not install due to Invalid folder path

    I have downloaded Itunes and every time I attempt to install it I get the message "The folder path "My Pictures" contains an invalid character". What can I do?

    This should help,
    This happens due to incorrect shell folder value type, or due to incorrect data in the registry. To resolve the problem, fix the My Pictures Shell folder paths in the registry accordingly. The default values are given in a tabular column in the following article. There is also a .REG fix available in the following page:
    http://windowsxp.mvps.org/usershellfolders.htm
    Don't forget to inspect the value type. If you're using an expandable string data such as %userprofile%, then the registry value type should be of REGEXPANDSZ, not REG_SZ.

  • Cannot install Canon Printer MG3100 Driver

    Hi guys! This is my first time using a MacBook Air and I got it in January this year. Initially, I managed to somehow get my wireless printer to be connected to my Mac (but I cannot remember the method I did). I was able to use it normally till February. After about 3 weeks of not printing anything, my Mac can no longer detect my printer. It's really frustrating! I downloaded the correct driver from the Canon website but it always fails to install! It always shows this:
    And I've tried downloading external drivers like Apple Canon Printer Drivers (http://www.macupdate.com/app/mac/27696/apple-canon-printer-drivers) and Apple Canon Printer Driver 3.0 for Mac OS (http://www.techspot.com/drivers/driver/file/information/16430/) but none of it seems to be working!
    Please help, I don't know what else I can do!
    Thank you!

    If you didn't manually trash the Canon driver files then they are most likely still present so the action of trying to run the driver installer again is unnecessary. To check if the driver is still present, open Finder and select Go > Go to Folder. Then copy the following text and paste that into the Go to Folder field and then press the Go button.
    /Library/Printers/PPDs/Contents/Resources
    Now look for a file labelled "CanonIJMG3100series.ppd.gz". If you see it then you still have the Canon driver installed and don't need to run the driver installation again.
    You mention the Mac no longer detecting the Canon. This is a result of the Bonjour discovery service failing on your Mac - there are others in the same situation. To get past this issue you can create a direct printer to the MG. To do this you will have to determine what IPv4 address the MG is using. As there is no display on this model you may have to connect to your wireless router to check what IPv4 address has been assigned to the MG. Once you have the IPv4 address then you can select to add a printer, but change from the Default view to the IP view. Then enter the IPv4 address of the MG, set the Protocol to Line Printer Daemon, enter LP for the Queue and change the Name to MG3100. Then select the MG3100 series in the Use menu and click Add to complete the creation of this printer. Now you should be able to print again.

  • [Solved]Matlab cannot work due to GPU driver not load

    I installed Matlab r2009b in my home directory and run a M-file in it but it crashed (see it here:http://wstaw.org/m/2012/12/17/2.png),the terminal information are:
    libGL error: failed to load driver: r600
    libGL error: Try again with LIBGL_DEBUG=verbose for more details.
    libGL error: failed to load driver: swrast
    libGL error: Try again with LIBGL_DEBUG=verbose for more details.
    After
    export LIBGL_DEBUG=verbose
    ,the information are:
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/r600_dri.so
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/r600_dri.so
    libGL error: dlopen /usr/lib/xorg/modules/dri/r600_dri.so failed (/home/mario/matlab/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /usr/lib/xorg/modules/dri/r600_dri.so))
    libGL error: unable to load driver: r600_dri.so
    libGL error: driver pointer missing
    libGL error: failed to load driver: r600
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
    libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
    libGL error: dlopen /usr/lib/xorg/modules/dri/swrast_dri.so failed (/home/mario/matlab/bin/glnxa64/../../sys/os/glnxa64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by /usr/lib/xorg/modules/dri/swrast_dri.so))
    libGL error: unable to load driver: swrast_dri.so
    libGL error: failed to load driver: swrast
    .and here are the dump file:
    Segmentation violation detected at Sun Dec 16 23:20:38 2012
    Configuration:
    MATLAB Version: 7.9.0.529 (R2009b)
    MATLAB License: 161051
    Operating System: Linux 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64
    GNU C Library: 2.16 stable
    Window System: The X.Org Foundation (11300902), display :0
    Current Visual: 0x21 (class 4, depth 24)
    Processor ID: x86 Family 6 Model 5 Stepping 5, GenuineIntel
    Virtual Machine: Java 1.6.0_12-b04 with Sun Microsystems Inc. Java HotSpot(TM) 64-Bit Server VM mixed mode
    Default Encoding: UTF-8
    Fault Count: 1
    Register State:
    rax = 0000000000000000 rbx = 0000000000000000
    rcx = 0000000000000000 rdx = 00007f024c0521a8
    rbp = 00000000009a0005 rsi = 0000000000000000
    rdi = 0000000000000000 rsp = 00007f025262d7f8
    r8 = 00007f024c0521d0 r9 = 0000000000000000
    r10 = 0000000000000000 r11 = 00007f026124ea80
    r12 = 0000000000001f02 r13 = 00007f025cd7eed8
    r14 = 0000000000000000 r15 = 00007f024fca5a60
    rip = 00007f01eaae84e0 flg = 0000000000010202
    Stack Trace:
    Please follow these steps to report this problem to The MathWorks so we
    have the best chance of correcting it:
    The next time MATLAB is launched under typical usage, a dialog box will
    open to help you send the error log to The MathWorks. Alternatively, you
    can send an e-mail to [email protected] with the following file attached:
    /home/mario/matlab_crash_dump.1036
    If the problem is reproducible, please submit a Service Request via:
    http://www.mathworks.com/support/contact_us/ts/help_request_1.html
    A technical support engineer might contact you with further information.
    Thank you for your help. MATLAB may attempt to recover, but even if recovery appears successful,
    we recommend that you save your workspace and restart MATLAB as soon as possible.
    My GPU is ATI Radeon 545v ,linux kernel is 3.6.9-1ARCHx86_64,
    I searched and concluded that maybe due to the open source GPU driver,could anyone help me without switching to the Catalyst? Thank you !
    Last edited by tomisacat (2012-12-18 23:39:35)

    olebowle wrote:
    I had the same issue.
    Have a look at: http://stackoverflow.com/questions/9959 … -the-one-i
    I simply linked sys/os/glnxa64/libstdc++.so.6.0.13 to /usr/lib/libstdc++.so and now it works fine.
    Thank you!,It worked!thank you ,thank you!

  • Cannot install due to registry errors.

    *NOTE TO SUPPORT STAFF: I DID NOT VIOLATE YOUR "SIGNATURE" RULES IN MY LAST THREAD, I DIDN'T EVEN INCLUDE A SIGNATURE. PLEASE ACTUALLY READ THE THREAD BEFORE YOU GO DELETING THINGS FOR NO REASON. ALL LINKS IN THIS THREAD ARE RELEVANT TO THE SUBJECT AND I CANNOT EXPLAIN MY PROBLEM WITHOUT THEM.*
    So, I went to install the iOS 4 today and lo and behold.. I needed to update my iTunes before I could do it for some stupid, arbitrary reason. Fine, I download it and am spammed with errors stating I don't have permissions to access certain folders for some reason (take note, I am the Administrator.) I go and delete those folders then re-run the installer.. Things run smoothly until I get these two registry errors.
    http://dl.dropbox.com/u/3794151/itunesinstallerrors.png
    I've been going out of my head trying to figure out what the **** is going on here.
    I've tried:
    - Completely removing all Apple software before re-installing
    - Re-downloading
    - Re-redownloading
    - Re-re-redownloading
    - Logging into the root Administrator account (the one that can only be accessed by first enabling it via command prompt) before installing
    - The solution posted at http://discussions.apple.com/thread.jspa?messageID=10545566, all the relevant registry keys are locked. The permissions cannot be modified nor can I delete said registry keys.
    But to no avail. Does anyone have any ideas? I'm on Windows 7 Ultimate x64 and yes, I am running the x64 version of the installer. I really don't want to have to format because of this.

    And bump again, do I not deserve support or something? I brought the iPhone 4, surely I should be entitled to actually use the **** thing?

Maybe you are looking for