HT1926 I a m unable to install and run the lates - Error 7()Windows error 1114)t version of iTunes. I keep getting a rruntime error - R6034 and a windows error
I am unable to install and run the latest version ot iTunes. Getting "Runtime error - R6034. An application has made an attempt to load the C runtime library incorrectly"
Error 7(Windows error 1114)
Try and not duplicate these issues and do a search next time.
Now load https://discussions.apple.com/thread/5826672?start=0&tstart=0
and that Topic has the correct information to fix this problem.
Regards
pcbugfixer
Similar Messages
-
I annot open my Itunes library ever since installing the latest version of Itunes today. I get an error "R6034." How can I fix this problem?
Hello Steven.
First and foremost, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
In any case, and since you seem to be in the process of updating (you should have done so a while ago, since Firefox 2.0 has been discontinued years ago, I believe), your problems may exist because you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone. -
Just upgraded to iPhone 5 - now when i am asked to upgrade and App it askes me alternatley for my old mobile me acconut details and then the new iCloud user name and password - how do i change deatils to just one login?
You cannot merge apple id's. remember that before creating any new ones in the future.
You have two choices. Live with it, or repurchase the apps under the id you intend to keep using. -
When in Facebook, I keep getting a window that I'm not logged in if I am on the site for about 10 minutes. I checked the error console and it told me that there is a possibility of being vulnerable. I cleared cookies and caches and also changed my password and restarted, but it's not helping. Is there anything I can do to fix this? I also got the vulnerability error for Delicious bookmarks, so I disabled it. I'm on a Mac with the latest upgrade.
== URL of affected sites ==
http://www.facebook.comSee this link for information about 'Renegotiation' (CVE-2009-3555):
* http://wiki.mozilla.org/Security:Renegotiation
* https://wiki.mozilla.org/Security:Renegotiation#security.ssl.renego_unrestricted_hosts
You can look at the pref security.ssl.renego_unrestricted_hosts on the about:config page and add the sites that you want to allow to the string value.<br />
Separate multiple host names by a comma. -
Tried to install the newest version and lost all itunes on this computer. Followed instructions about removing and reinstalling iTunes, Quicktime, etc. Now I get message "Could not open key: UNKNOWN\Components|" and several letters/numbers afterward.
The first thing would be to get the proper version of Safari for your version of OS X (Tiger).
Go here to get Safari: http://www.apple.com/safari/download/
Be sure to choose the bottom choice:
You will also need the latest security update for Tiger. -
This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ...........-HP
System Manufacturer Hewlett-Packard
System Model HP ProBook 4530s
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version 2.6
Windows Directory C:\windows
System Directory C:\windows\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ...........-HP\................
Time Zone South Africa Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.94 GB
Available Physical Memory 1.00 GB
Total Virtual Memory 7.87 GB
Available Virtual Memory 1.25 GB
Page File Space 3.94 GB
Page File C:\pagefile.sysTo clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK
-
itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!
I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly. -
I have a problem with connecting my iPhone to iTunes. I uninstalled one of the computer program and restart my laptop. After restart my laptop and a message said that iTunes might not working because one of the component is missing and request to reinstall the iTunes. Hence I remove iTunes from my laptop and I reinstall iTunes to my laptop but still not working.
Before this the iTunes will automatically launch when I plug in my iPhone. But after I reinstall iTunes, it's not working. When I try to plug in my iPhone after iTunes launched and message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes." popped out. I did this twice but it's not working as well.
Please advise what should I do to fix this.First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.
Make sure you are running as the Administrator of the Account.
Also... See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates -
I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!
Hi, Mommacat26.
Thank you for visiting Apple Support Communities.
This usually means that a required component is missing. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If the issue persists, try installing the Apple Mobile Device Support driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.
Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html -
I tried yesterday to install iTunes on a XP Services Pack 3 Pc, It said that it couldn't install it. So after much reading last night, i downloaded Revo Uninstaller Pro, and uninstalled all apple software, included Bonjour, Quicktime and Apple Support along with iTunes. I then, used Ccleaner to double check that nothing apple related was left in the registry.
After doing all the above, i rebooted the PC, and downloaded a fresh copy of iTunes from the website, and installed it. I installed the first time of asking. I then pulged in my Son's new iPod, and it detected it as a scanner/Camera, and behind that was a message that said the following:" This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes then install iTunes again"
I've tried doing this, and it keeps coming up with the same message
Can anyone help pleaseIn Windows 7, go to Control Panel (usually in the Start menu) and look for Add and Remove Programs. It will load a long list of programs. Find iTunes on that list and uninstall it. Then try using the 64-bit installer.
-
Trying to install itunes but keep getting windows error126 message and libicuin.dll missing
trying to install itunes but keep getting windows error 126 message and libicuin.dll missing have reinstalled numerous times and keep getting same messages.
Are you saving the installer first and then installing, or are you running the installer directly from Apple's website? Also save first.
If you're saving first and still having issues, try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
http://support.microsoft.com/kb/290301
Make sure it's a new and fresh download from:
http://www.apple.com/itunes/download/
If not mentioned in the articles, make a new user account in Windows and see if iTunes opens. That will tell you if there's something funky in your main account (if the new user works), or if you have a system-wide issue. -
Got error message :"This this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version" This is on a new macbook. I already have the latest version installed and 64 bit. Help.
Did you do what the message said?
Also try using the Win 7/Vista link in the following:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Maybe you are looking for
-
How to Install or Use Perl in 11g client?
Hi all, I read this doc: Perl 5.10.0 is included in the Oracle 11.2.0.1 client. Execute the following command to ensure that the correct version of Perl is in the user profile PATH. perl -V 'perl' is not recognized as an internal or external command,
-
I want to login as administrator but I have for got my password how to I fine it
I want to login as administrator on my mac book pro but I have forgot my password how do I fine it'? I want to down load so x Maverick can a anyone help me thank you Kath
-
Outline Print out for bullets & numbering
Hi, In RoboHelp my default bullets have a left margin of say "0", but when I generate the print version they have a margin of say "1". It looks like this: 1. xyz * xyz SSL Print out 1. xyz * xyz Any ideas for a permanent fix?
-
Hi all, I have to modify an FM to extract the SLED/BBD (expiry date) based on material and batch number, and move it to an IDoc segment. In addition i need to take into account batch splits in which case the earliest SLED/BBD will be moved to an IDoc
-
Component for creating paragraphs
Hi, I need to make text panel which formats text to paragraphs following way: Author:-----------------------mr. X File Creation Date:------------28.7.2003 Authentication Server Name:--Server Which Java class should I use? I have been reading about JT