HT1926 i installed itunes and it wont open

I installed the new version of iTunes and it will not open. I have uninstalled and reinstalled with no luck. I have even tried to go back to the older version but it will not open now either. Suggestions?

Is there an error message? If so give it in full.
Do you have Quicktime installed?
Does it work normally?
An out of date Quicktime is a common casue of launch faiure after installing the new version of iTunes
I have Quicktime v 7.7.3
You can download the latest Quicktime here:
http://www.apple.com/quicktime/download/win.html

Similar Messages

  • Just installed itunes and it wont open!

    i just installed itunes on a brand new hp computer with windows xp. the installation finished successfully, but when i click on the itunes icon on the desktop the cursor turns to a searching sign for afew seconds, but itunes will not open. i have tried restarting my computer, uninstalling and reinstalling itunes and nothing seems to work. i need help!

    Hi amanda6789
    Please look through the forums. You will see most often problems are caused by antivirus/antispy software conflicting with iTunes.
    Ensure you always download the iTunes programme to your pc (save to desktop for example) not try to install online and disable AV/Spy software before you try to run the install.
    Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP   SP2 20Gb iPod

  • Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue

    i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod

    Refer to this thread:
    https://discussions.apple.com/thread/3174150?start=0&tstart=0

  • Itunes and quicktime wont open when click on it

    Hi,
    I am unable to open Itunes or Quicktime on my netbook. I have tried reinstalling the software but it wont work. Please can someone advise how I can get it working.
    Thanks in advance
    Chris

    In recent times, the error-message-free iTunes and QuickTime launch failures have been indicating that another application has stashed old QuickTime componentry in your system files. (Those sorts of applications often use the Visual C++ runtimes to keep track of the componentry, so it seems consistent that an update to those could cause the symptoms to flare up on a PC.)
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit Windows 7, open the "System32" folder.
    If you have a 64-bit Windows 7, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Itunes and Quicktime wont open!

    Hi all,
    My itunes randomly stopped working the other day. Everytime i open it a message appears saying that there was a problem and it needs to close! i removed itunes and tried to reinstall it but now it wont reinstall. I figured quicktime might be the problem so i tried to remove it too but it wont remove from my computer and i dont know what to do now :-/ anyone able to help me??

    In recent times, the error-message-free iTunes and QuickTime launch failures have been indicating that another application has stashed old QuickTime componentry in your system files. (Those sorts of applications often use the Visual C++ runtimes to keep track of the componentry, so it seems consistent that an update to those could cause the symptoms to flare up on a PC.)
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit Windows 7, open the "System32" folder.
    If you have a 64-bit Windows 7, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I Dl iTunes and it wont open

    PLEZZZZZZZZZZZZZZZZZ help
    iv uninstalled and reinstaled iTunes like 10 jillon times
    and after it runs its instarler thingy
    it wont open
    at all
    Ouick time wont work eather
    what do i do?

    Have you tried installing a stand alone version of quicktime?
    http://www.apple.com/quicktime/download/win.html
    quicktime WITHOUT itunes included

  • Itunes and Internet wont open because of a "netsh reset" code

    My Itunes store was having troubles opening before, and i couldnt figure anything out to make it work. i updated it, redownloaded it, and finally used a "Netsh reset" code in the command prompter. this resulted in Itunes not even opening, and neither did my internet. i've no idea how to fix it or what to do. help?

    Try removing QUicktime and installing the stand alone version. Also check for incompatible software.
    Here is a method
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
    If so uninstall them.
    Then download the version of Quickime without iTunes:
    http://www.apple.com/quicktime/download/win.html
    Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
    Restart you computer
    Install the stand alone Quicktime and check if it starts.
    If it does you are in a position to find out if iTunes is OK.

  • Both itunes and quicktime wont open!

    so its been a few days and my itunes has not opened.
    a message keeps popping up that says::
    itunes has encountered an needs to close...send//dont send error report.on some topics i read that the problem may be quicktime-related, so i tried opening up my quicktime player. however, that would not open either!
    i dont want to uninstall itunes because i dont want to lose my music, and im afraid to uninstall quicktime because i dont know if i have the program to reinstall it later on.
    someone help!
    thankss,
    ashley.

    hi ashlay!
    here's how to do a careful standalone reinstall of QuickTime:
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
    love, b

  • Installed itunes and then cannot open says MSVCR80.dll cannot be found

    I downloaded itunes but cannot open. says MSVCR80.dll cannot be found. I have downloaded twice.

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Installed Itunes and will not open

    I have installed and uninstall itunes on my Laptop mulitiple times and it will not open up.  I have tried to run it as administrator, repairing it, unistalling it and reinstalling and it will not open.  Is there an error or problem with the windows version for this to keep happening?

    No, nothing at all happens. Once clicked the 'circle' that suggest it is loading appears (if that makes sense) but no, nothing
    Many thanks.
    Can you check something for me please?
    Restart your PC. after the PC restarts, bring up your Task manager, and go to the "Processes" tab. Click "Image name" to sort the processes alphabetically.
    Now try to launch iTunes.
    Does an itunes.exe process appear? If so, does it vanish after a second or so, or does it persist in the Processes tab (even though iTunes itself never shows up)?

  • I just downloaded the newest version of itunes and it wont open. I've tried everything and it just refuses to open the program. HELP!

    Help Help Help. I just want my itunes to open but since I downloaded the new version (11.1) it refuses to!

    Hello there Chellby,
    Thank you for using Apple Support Communities.
    I have 2 articles to recommend for you depending on what version of the Windows OS you have.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Or
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Cheers,
    Sterling

  • Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open

    Itunes wont open. Ive tried uninstalling, cleaned up my PC and then re installed again but still wont open! There are no error messages. It just wont open! Im very frustrated and anything would help! I have Windows 7 or Vista. Idk which

    Hello Dr.Help,
    Thank you for providing so much information about the issue you are experiencing with iTunes.  It sounds like you have tried reinstalling it, but nothing happens when you launch it.  I recommend following the steps in this article to resolve launch issues with iTunes:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1926 I have troublshooted uninstalling and installing itunes and i still cant open it an error message keeps coming up:  The procedure entry point AVCFPlayerApplesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AV

    I am unable to connect toitunes i have followed the troubleshooting for unistalling and installing iTunes and i still get this error message and it will not open the following is the error message:  The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
    then i get this other error message also as follows:  iTunes was not installed correctly.  Please reinstall iTunes  error 7 (Windows error 127)
    can anyone help me?

    See Troubleshooting issues with iTunes for Windows updates.
    iTunes 11.1.5 was released today and may work better for you.
    tt2

  • After an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    after an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
    iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

  • I installed itunes and quick time  but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096)"

    I installed itunes and quick time  but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096).  I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message.  What do I do to get itunes to work?

    That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

Maybe you are looking for

  • How can I add a search filter by EAN (code of items) in my application?

    I have to filter my list of item (product) by their code. Someone can eplain me how can i do it? I'm new with CF. Thanks.

  • Update Rule routine to get Totals of the key figure

    Hey BW folks.... i have  a requiremnt in the report wherein I have to get the total salary of all the employees in the cost center. As cost center has many employees I want to calculate total salary of the those employees in tht cost center only.So 

  • Macbook pro hot

    Hi, I have a Macbook pro early 2011 model and tends to heat up very quickly to around 65c where its hot to touch.The fans also reach up to a speed of 2400rpm making it very noisy and very hot. Is there something wrong with my mac, or all is well. Tha

  • HT1212 How do you undisable your ipad?

    I DISABLED MY IPAD WHEN ENTERING THE INCORRECT PASSWORD, ITS TELLING ME TO CONNECT TO ITUNES, BUT ITUNES CANNOT ACCESS IT BECAUSE IT IS LOCKED.  HOW DO YOU UNLOCK IT?

  • Cisco ISE - Not use FQDN in url-redirect parameter

    Hi, I am using Cisco ISE Central Web Authentication for Guest Wireless. Clients are redirected for web authentication to: https://ip:port/guestportal/gateway?sessionId=SessionIdValue&action=cwa as it is specified by the url-redirect parameter in the