HT1926 I just tried to update to the latestItunes and now it wont open.
After updating to the lastest version of Itunes now my computer will not open it. It says it is missing MSVCR80.dll and to reinstall. Then when I click ok it pulls up a box that says Error 7 (windows error 126) I tried reinstalling. I don't want to remove it and lose everything. Help!
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
-
TS1490 updated to new verison and now it wont open itunes store..
updated to new verison 10.63 and now it wont open itunes store..very vey upset.
it just says accessing itunes store but will not open
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I have tried to update my iphone 4 and now it wont sync and my computer does not recognise it
i was able to back up my files and have latest updated i tunes but whilst updating my phone an error occured and now my phone wont do anything and my computer doesnt recognise the device can any one help please
See here - http://support.apple.com/kb/TS3694#error1603
-
I updated software on ipod and now games wont open please help!!!
i just updated my ipod to the latest software and now when i got to any game it wont open can anyone help me fix this pleaseeeeee
Try here:
iOS: Troubleshooting applications purchased from the App Store
- Game Center games only
- Do other purchased apps work?
- Do apps that came with the iPod work?
- Have you tried a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try downloading/installing a new app.
- Do the apps really open by very quickly close? -
I have just updated my Ipad mini the latest version (so I am told) but it has stopped my I pad from working and it says that I have to restore it back to factory settings etc. and will lose my data as I dont know whether I have fully back up my photos which I dont wont to lose what do I do??????????????????
If it's in recovery mode, the data is already gone. Why did you never back up your important data?
-
when i took my iphoto out of the trash it wouldnt open the same it goes to a blank page and has that waiting circle but it never loads and i cant put pics in it... i even tried re installing it and it did the same thing! help me i really miss my pictures
there isno iphoto in my applications folder
Then you'll have to reinstall iPhoto. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally. -
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I have just tried to update my ipod touch and the update failed but it has locked my ipod. All I get is a picture of the itunes logo and the usb lead. I am unable to get the ipod to move and I don't know what to do. I think I should be recompenced by Apple if I have to pay to get it fixed!
The logo is saying connect it to your computer with iTunes installed on the computer. I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Place the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If the iPod appears in iTunes restore the iPOd. If not I would make an appointment at the Genius Bar of an Apple store. -
I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
Just downloaded aperture 3.4 update for the app store and now it wont open please help!!
just downloaded aperture 3.4 update for the app store and now it wont open please help!!
Just want to echo this complaint.
I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps. It continues to crash each time I open it no matter what. -
I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?
Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I have just agreed to software updates on my imac and now can't open my mail. There is a message saying this version of mail isn't compatible with this latest software. I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk. Does anyone have any suggestions?
Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
In the future, do not move any of the preinstalled applications. Leave them where they are. -
I have tried to update my iphone 4 and now it is unresponsive and frozen either on the apple logo or sometimes i can get it back to the itunes logo though it is still frozen. I have also tried restoring it and still nothing
See here - http://support.apple.com/kb/TS3694#error1603
-
My iphone 5 has just had an update for candy crush and ever since i opened it the screen has been black and I can't get it to do anything what can I do?
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.) Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Delete the App, then reinstall it.
Test the issue after each step. Make sure to quit the app as described before each followup step.
Maybe you are looking for
-
How to delete the data in the compressed infocube
hi, bi gurus we are facing a problem in inventory management the info cube in BW production normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table now the problem is we are having some ba
-
How can I change an SSL Certificate display name on Firefox?
I have 6 SSL Certificate to install in order for an application to open in 6 ways. Each certificate represent a way. The problem is that the pop up window i am receiving to choose one of these 6 SSL displays the Issuer CN while i need it to display t
-
PL SQL Web Service Authentication through LDAP
I have created one PL SQL Web Service and I would like to provide token security through LDAP. I have configured LDAP for deployed webservice in oracle IAS 10.1.3 Service. Problem Description: <?xml version="1.0" encoding="UTF-8"?> <env:Envelope xmln
-
Feature Request - show substitution string values in session state display
Hi! I would like to request that in addition to page and application items and session state values that the value of substitution string values be shown. Another option would be to have a separate link (like session) to display them. This would allo
-
How to Edit "Open With" in contextual menu
For instance, while right clicking on a jpeg the "Open With" pop up displays Pixelmator, which is no longer installed, it also shows Photoshop Elements, but that version is on a backup disk, not the current disk, also there is no option to open in Ap