HT1926 Itunes 12 crashses when accessing stores on Windows 7

Any suggestion how to rectity this crash while accessing stores on windows 7. Itunes 12

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
(As given above)
tt2

Similar Messages

  • Keep getting itunes not working when accessing store windows 7

    I keep receiving the message" iTunes stopped working" only when trying to access the store.  Using windows 7 and have all of the latest updates.

    Greetings glennafrommurphysboro,
    Welcome to the Apple Support Communities!
    I understand that you are having issues connecting to the iTunes Store on your Windows computer. In this situation, I would recommend working through the troubleshooting steps located in the attached article to help resolve the issue. 
    Can't connect to the iTunes Store - Apple Support
    Cheers,
    Joe

  • Itunes stops working when accessing the store what needs to be done to get it working again?

    itune stops working when accessing the store.  What needs to be done to get it working again?

    Hey Baitmaster61!
    Here is an article that will help you troubleshoot this issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • TS1424 iTunes 11 crashes when accessing iTunes store

    iTunes 11 crashes when accessing iTunes store. Any suggestions?

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • Itunes is stuck accessing store? Windows 7 64 bit, just did 10.6.1.7 upgrade

    Itunes is stuck accessing store . Windows 7 64 bit just upgraded to 10.6.1.7 , tried uninstall and trind winsock reset neither worked

    Try here:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    You seem to have an iTunes problem and not an iPod problem. The iTunes forum is likely a better forum to post in.

  • Itunes bombs outs when selecting "store"  with UBD.exe issue

    Itunes bombs outs when selecting "store"  with UBD.exe issue - what is the remedy?

    Hello there, tuneasa.
    The following Knowledge Base article offers some great steps for troubleshooting issues with iTunes performance:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I updated my Itunes but now when i open the window it's blank. I'm not sure what to do.

    I updated my Itunes but now when i open the window it's blank. I'm not sure what to do.

    You might try this tip....iTunes 11.1.3 appears to have flawed permissions:
    Repair permissions either with Disk Utility in the Applications/Utilities folder or on the command line with:
    diskutil repairPermissions /

  • After trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

    after trying all kind of possible solutions Itunes cannot connect to the store. Windows 7

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • ITunes 12 crashes when accessing the store

    I installed Yosemite and iTunes 12.0.1. Since then, it crashes when accessing the store (wolor wheel)
    I re-installed iTunes. It works with my Library when my iMac is disconnected from the net, but as soon as iTunes tries to access the store and refresh iTunes Match… Bang. It freezes again and I have to re-install it (it freezes again when I restart, even when disconnected).
    Ho can I solve this, please ?

    I was having the same issue. iTunes Match had little or none to do with it. Basically anything that required logging into the store (I needed to re auth). Frustrating because iTunes now makes you use your apple id for the tiniest little tasks, and worse yet, it shows logged in, but it really isn't. Anytime I tried to authenticate it would time out and then cause iTunes and a library file to not respond, causing me to force quit. I did notice my wireless connection was suffering. I rebooted my router and tried again, voila! connected and authorized! no time outs! iTunes 12.0.1.26 seems to be a little sensitive to weak connections?

  • Why iTunes 10 crashes when accessing the iTunes Store?

    iTunes 10 is local working well after starting. I can play all my music, videos , etc. When I like to access the iTunes store iTunes crashes without any warning.
    What can I do, to fix the probleme?
    Thanks in advance.
    skipper2

    I am running iTunes 10.1.2 on Mac OS 10.6.6
    All my home sharing is turned off as is Genius (which was causing crashes on startup). I don't share my library. In fact I'm pretty sure I've turned off as much as I can.
    If I access the iTunes store, iTunes crashes.
    If I run Genius, iTunes crashes
    Sometimes if I plug in my iPhone, iTunes crashes (I think it's going out to the network to find updates)
    If I download a podcast or subscribe to a new podcast iTunes works OK.
    If I turn off my network iTunes runs fine.
    It seems that whenever iTunes talks to Apple's servers it crashes.
    Here's what was posted to /var/log/system.log when iTunes crashed trying to access the iTunes store:
    Feb 7 14:04:14 pilot com.apple.launchd.peruser.504[199]: catchmach_exception_raise_stateidentity(): PID: 1656 thread: 0x10c67 type: 0xa code: 0x76044 codeCnt: 0x2 flavor: 0x76054 old_state: 0x7605c old_stateCnt: 0x2c new_state: 0x7702c new_stateCnt: 0x77028
    Feb 7 14:04:14 pilot com.apple.launchd.peruser.504[199] (com.apple.ReportCrash.Self[1656]): Job appears to have crashed: Trace/BPT trap
    Feb 7 14:04:14 pilot com.apple.launchd.peruser.504[199]: catchmach_exception_raise_stateidentity(): PID: 1655 thread: 0xbfa7 type: 0xa code: 0xbfffe49c codeCnt: 0x2 flavor: 0xbfffe4ac old_state: 0xbfffe4b4 old_stateCnt: 0x2c new_state: 0xbfffe9bc new_stateCnt: 0xbfffe9b8
    Feb 7 14:04:14 pilot com.apple.launchd.peruser.504[199] (com.apple.ReportCrash[1655]): Job appears to have crashed: Trace/BPT trap
    Feb 7 14:04:14 pilot com.apple.launchd.peruser.504[199]: catchmach_exception_raise_stateidentity(): PID: 1598 thread: 0xbfab type: 0xa code: 0xbfffe49c codeCnt: 0x2 flavor: 0xbfffe4ac old_state: 0xbfffe4b4 old_stateCnt: 0x2c new_state: 0xbfffe9bc new_stateCnt: 0xbfffe9b8
    Feb 7 14:04:14 pilot com.apple.launchd.peruser.504[199] ([0x0-0x134134].com.apple.iTunes[1598]): Job appears to have crashed: Segmentation fault
    Hopefully someone from Apple reads this forum and can let me know of a fix.
    Mark

  • Itunes 11 crashes when accessing the itunes store

    When I upgraded to iTunes 11, it started crashed every time I accessed the iTunes Store.  After doing some searching, I decided to try resetting TCPIP on my Windows 8 PC.  Right after I did that, iTunes started accessing the iTunes Store immediately up startup, so it crashed immediately.  My fix was to uninstall everything Apple related and delete the plist preference files.  I also moved my library to a NAS device (not sure if that was necessary or not but at this point I'm scared to move it back).  Then I restarted and installed iTunes 10.7.  I had to recreate may library and I don't have any playlists (but I assume I can import them back in).  In this whole process when I tried to log in to this community site I found out that I needed to update my password.  Not sure if that was related or not.  Also, I tried going back to version 11 and it started crashing immediately, so I went back through the steps and 10.7 is working.  I haven't tried to access the iTunes store yet, though.

    OK.  I went to version 11 again and my crashing problem returned.  iTunes crashes immediately when it opens.  I turned off my wireless connection and restarted iTunes.  It gave me an error that it couldn't connect to the store twice (even though I wasn't trying to browse the store).  After that, it worked fine.  So, now I can at least use iTunes without it crashing.  If I try to go to the store, it crashes again.  So, I'm making progress.  There must be something between Windows 8 and iTunes 11 that causes issues.  It worked fine on this laptop after I did the update while I was at work today, but doesn't work at home, so I'm wondering if this has something to do with profiles.  I'm pretty sure it isn't my firewall, but it could have something to do with my user profile or Windows security settings that change when I am at home versus when I'm at work. 

  • ITunes 12.1 still frequently crashes when accessing store

    When I updated to iTunes 12.0.1 from iTunes 11.4, iTunes started frequently crashing on launch or if it would launch, when accessing the store.  This continues with iTunes 12.1.0.71.  It's crashing less often, but still does.  When it doesn't crash, I frequently get messages about network connections being reset.  I can sometimes get to the store, sometimes not.  Trying to update Genius or iTunes Match always fails though.  If I try to run the network diagnostics, it also crashes.
    The above problems only happen when I'm in my office.  If I'm at home or if I VPN to my home, iTunes works fine.  11.4 works fine at my office so iTunes isn't blocked by my corporate firewall, but for whatever reason 12 and up has problems.
    Crash that occurs on startup, trying access iTunes account or iTunes store:
    Faulting application name: iTunes.exe, version: 12.1.0.71, time stamp: 0x54c76235
    Faulting module name: JavaScriptCore.dll, version: 7600.1017.6000.1, time stamp: 0x54b5da5f
    Exception code: 0xc0000005
    Fault offset: 0x00000000001d2121
    Faulting process id: 0x24f0
    Faulting application start time: 0x01d03f02b94631f8
    Faulting application path: C:\Program Files\iTunes\iTunes.exe
    Faulting module path: C:\Program Files\Common Files\Apple\Apple Application Support\JavaScriptCore.dll
    Report Id: 0a51eba0-aaf6-11e4-8be2-f01faf3e6c79
    Crash that occurs when running network diagnostics:
    Faulting application name: iTunes.exe, version: 12.1.0.71, time stamp: 0x54c76235
    Faulting module name: objc.dll, version: 1.528.0.126, time stamp: 0x54940801
    Exception code: 0xc0000005
    Fault offset: 0x0000000000020d92
    Faulting process id: 0x1e2c
    Faulting application start time: 0x01d03efc48783f70
    Faulting application path: C:\Program Files\iTunes\iTunes.exe
    Faulting module path: C:\Program Files\Common Files\Apple\Apple Application Support\objc.dll
    Report Id: 9025c036-aaef-11e4-8be2-f01faf3e6c79

    Hello Morac,
    Thanks for using the Apple Support Communities. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. Most of these issues can be resolve by using the following article - I’d give the steps a go even though you have isolated the issue pretty well:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    Thanks,
    Matt M.

  • Getting intermittent AccessViolationExceptions when accessing stores from Outlook.Stores object

    We have a very strange situation in which we get random AccessViolationExceptions when trying to access stores (in particular our own) via the Outlook.Stores.
    Here's a code snippet of how we're calling this (currently done in our Outlook.ExplorerEvents_ActivateEventHandler handler, and only the first time is is called)
    Outlook.NameSpace ns = ThisAddIn.OutlookApplication.GetNamespace("MAPI");
    Outlook.Stores stores = ns.Stores;
    Outlook.Store store = null;
    int nStoreCount = stores.Count;
    for (int i = 1; i < nStoreCount; i++)
    store = stores[i];
    String name = store.DisplayName;
    store = null;
    When we get to the point of accessing a store via index, we will sometimes get the AccessViolationException, but only sometimes and only (as far as I can tell, since the order isn't always the same from run to run) our message store.
    We originally had this bit of code in our ThisAddin_Startup sequence, but it would actually crash Outlook completely when the exception occurred, so I moved it out of there and it at least now doesn't bring down the whole application.
    MFCMAPI has no trouble opening the message store ever.
    I have seen some references in my research to problems with .net 4.0 and earlier with regards to SynchronizationContext being null, and we are using 4.0 and getting null SynchronizationContext.current values. But we get that when the exception doesn't happen,
    too, so I don't know if that's a red herring. However, this code is a back-port from a newer version of our software that was coded against .Net 4.5, and we don't see the issue there at all. As this is going into a patch, build with VS2010, we can't change
    the target platform.
    I have tried moving the call to worker threads, and I even saw one suggestion of trying to do it in our Outlook.ExplorerEvents_SelectionChangeEventHandler code, but nothing seems to work.
    I should note that after the exception occurs, and the Outlook Explorer window opens and populates, if the user manually clicks our message store node, the MSProviderInit->IMSProvider::Logon sequence fires, and fires without the MDB_NO_DIALOG flag being
    sent in. During Outlook's start-up, we get that sequence of calls several times, but always with the MDB_NO_DIALOG set, so we return MAPI_E_LOGON_FAILED and don't execute the code which creates our IMsgStore object. So the user's manual operation causes our
    IMsgStore to get created and everything is fine. The reason the above code is added is to try to simulate the user's manual action and sort of 'tickle' the store creation process.
    When the AccessViolationException does not occur, we get the full MSProviderInit->IMSProvider::Logon, etc sequence. When it does except, we don't even get our MSProviderInit entry point called. It's almost as if our dll gets loaded and then Outlook loses
    it.
    Any thoughts on this?

    Hi Kevin Delgado,
    >>if somebody knows what these other flags mean/are defined as in the context of the IMSProvider::Logon call, that would be great<<
    Did you mean that the value of ulFlags? If yes, you can refer to the document below:
    ulFlags                               
    [in] A bitmask of flags that controls how the logon is performed. The following flags can be set:
    MAPI_DEFERRED_ERRORS                   
    The call is allowed to succeed even if the underlying object is not available to the calling implementation. If the object is not available, a subsequent call to the object might raise an error.
    MAPI_UNICODE                   
    The passed-in strings are in Unicode format. If MAPI_UNICODE is not set, the strings are in ANSI format.
    MDB_NO_DIALOG                   
    Prevents the display of logon dialog boxes. If this flag is set, the error value MAPI_E_LOGON_FAILED is returned if the logon is unsuccessful. If this flag is not set, the message store provider can prompt the user to correct a name or password, to insert
    a disk, or to perform other actions that are necessary to establish connection to the store.
    MDB_NO_MAIL                   
    The message store should not be used for sending or receiving mail. The flag signals MAPI not to notify the MAPI spooler that this message store is being opened. If this flag is set and the message store is tightly coupled with a transport provider,
    the provider does not need to call the IMAPISupport::SpoolerNotify method.
    MDB_TEMPORARY                   
    Logs on the store so that information can be retrieved programmatically from the profile section, without use of dialog boxes. This flag instructs MAPI that the store is not to be added to the message store table and that the store cannot be made permanent.
    If this flag is set, message store providers do not need to call the IMAPISupport::ModifyProfile method.
    MDB_WRITE                   
    Requests read/write permission.
    Also you can get more detail about IMSProvider::Logon function from link below:
    https://msdn.microsoft.com/en-us/library/office/cc842201.aspx
    Hope it is hlepful.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My itunes software crashes when accessing the music downloads. I use window 8.1

    Is there a fix for itunes crashing when accessing the music download. I use windows 8.1?

    Hello gaz2243,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • Itunes stops working when accessing itunes match, Windows 8

    I installed itunes match a few months ago and it worked well once, but now whenever i start iTunes, it tries to access iTunes match for about 2 minutes, than I get a window "iTunes has stopped working" and it shuts down. I tried reinstalling, but no go. Anyone?

    Hi there JohnnyDisco,
    I would recommend taking a look at the iTunes troubleshooting article below. 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues 
    -Griff W.

Maybe you are looking for