HT1926 Itunes dosesnto install proparly giving the follwoing messgae: Error 7 (windows error 126)
When I try to reinsatll , it gives me success message , but whne I try to run it, it gives the follwoing message:
msvcr80.dll is missing
Hello scschwab,
I found an article with steps you can take when you are getting Error 7 when opening iTunes. I recommend following the steps in this article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?
Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues -
I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?
You can only sync with one iTunes library/computer. To switch:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.
I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.
-
My iTunes purchases will not download to my iPad gen4. Keeps giving the message" download error tap to try again"
I have the same problem. Did you get yours resolved?
-
Can uninstalling and installing CS4 fix the debug event error message?
Hello,
Can uninstalling and installing cs4 solve the debug event error message?Can uninstalling and installing cs4 solve the debug event error message?
Well, that DOES seem to be the scripted mantra of Adobe TS in some out of the way country. According to most reports, that cures everything from trying to Capture over a USB cable to working with footage from your cellphone camera. In most cases, it has cured very little, though maybe the Debug Event error IS something that will be fixed by this.
Good luck,
Hunt -
HT1926 Can't install or uninstall the latest version of iTunes
Everytime I go to install the latest version of iTunes I get through most of it, then a window comes up that says "Windows Installer" - "The feature you are trying to use is on a network resource that is unavailable." - "Click OK to try again, or enter an alternative path to a folder containing the installation package 'iTunes64.msi' in the box below."
In the drop down dox below the previously stated there are two options:
1) C:\Users\"Username"\AppData\Local\Apple\Apple Software Update\
2) C:\ProgramData\Apple Computer\Installer Cache\iTunes 10.5.0.142\
Neither of them work and I get the message: "The path 'C:\ProgramData\Apple Computer\Installer Cache\iTunes 10.5.0.142\iTunes64.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes64.msi' in a folder from which you can install the product iTunes."
There is an option to Browse for the porgram but I can never find what it needs. Even when I attempt to uninstall iTunes I receive the same messages as above. I have a Windows 7 PC. I have looked through all the possible Troubleshoots on the Apple website and on the iTunes site and none of them helped. My iTunes works perfectly fine and does everything it is supposed to except when I attempt to install iTunes. I have tried every way possible and still nothing works.
Below are the windows that appear when I attempt to install iTunes. Any help would be appreaciated, I just really want to get the latest version of iTunes on my computer, it has been a while since I have.Superb detail, thank you.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
We cannot open iTunes after installing it. When we click on the icon the licensing agreement comes up and we click Agree but then nothing happens. Each time we click the icon the agreement comes up. We've tried uninstalling and reinstalling but we have the exact same problem.
Refer to steps to remove SC files here:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / PROGRAMS N FEATURES / highlight QUICKTIME and click REPAIR. -
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv6700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
VoiceOver Kit 1.4 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0025AAF8089EC380
Current user is not an administrator.
The current local date and time is 2011-05-15 21:05:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dc0c6f739bfede483c8983f10e41784f
iPodService 10.2.1.1 is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {588EB1BD-8374-43B1-B687-C47C33764298}
Description: Intel(R) Wireless WiFi Link 4965AGN
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun May 15 20:23:07 2011
Lease Expires: Mon May 16 20:23:07 2011
DNS Servers: 192.168.1.1
Adapter Name: {1C11AE53-28A5-4AC7-BA9F-CD4109D7856C}
Description: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2011-04-30 21:01:11.Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir -
HT1926 ITunes 11 install issue, Error 7 (Windows error 126)
While trying to install ITunes11 on a Windows Desktop with MS XP SP3 I keep getting an error message that states "ITunes was not installed correctly.Please reinstall ITunes.Error 7(Windows error 126)".There is an initial message that states that "Apple Mobile Service did not install" with three choices of Abort,Retry,Ignore which I have tried all 3 with same result of no install and it asks that I make sure I have administrative rights which is not an issue.Any help would be greatly appreciated,thank you.
Hi mrsboots2003,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
"iTunes could not connect to the Music Store" Error Message
Hello all,
I finally got my script running correctly and I can see the front page of my iTunesU site(Yay!). But I am getting an irritating error message, and what is unusual are the circumstances under which I see the error message and the circumstances under which I do NOT see the error message. Allow me to elaborate.
Scenario #1
I have iTunes open on my computer. I go to the login page I created on my school's website and login. I watch as the "Music Store" page on iTunes gives way to the front page of my iTunesU site. Perfection! This is the behavior I want!
Scenario #2
I DO NOT have iTunes open on my computer. I go to the login page I created on my school's website and login. I watch as iTunes begins to open and then spits out this error message:
"iTunes could not connect to the Music Store. An unknown error occurred. Make sure your network connection is active and try again."
There is also an error number attached to the error message but it changes from time to time with no explanation. Here is the strange part. If I just hit "OK" on the error message my iTunesU site opens fine.
I've tried this on my home and work computers and a friend's computer and the behavior is the same. Moreover I surfed over to the Stanford iTunesU login page: http://itunes.stanford.edu/ and I get the same behavior(which pretty much rules out in my mind that it is a problem with my script).
I guess it isn't a huge deal. Worse comes to worse we can tell the students and faculty, if you see an error message from iTunes just hit "OK". But I'm rolling out this slick new iTunesU site and this error message is like a scratch in the paint job. Plus my boss is looking over my shoulder like "what's that error?" and it is starting to detract from the computer whiz kid image I've worked so hard to cultivate
My possible suspects are:
iTunes - (Went over to the iTunes discussion board and a lot of people report similar error messages when trying to get into the Music Store but I couldn't find anyone who said hitting "OK" made it possible to proceed)
My script -(seems unlikely since Stanford has the same problem)
The configuration on the computers I've tested it on - (But I've tested it on three different computers!)
iTunesU - If this is the problem I'm hoping you people can help me.
So has anyone else experienced this?
Try to login into your iTunesU page with and without iTunes already open. See any error messages or weird behavior?
Try the same thing on Stanford's site: http://itunes.stanford.edu/
If you can repeat my result then post it here so Apple will know this is an issue. If you can't repeat my result then post it here so that I might know I need to look elsewhere for the problem.
Thank you for your kind attention.I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
"iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
Ken Newquist
Lafayette College -
Cannot open iTunes after installing Lion.Says it is trying to restore windows and quit unexpectedly
Cannot open itunes after installing Lion. Says trying to restore windows and then quits
same
Message was edited by: Ben123212321 -
Dear Experts,
I have used 2 buttons in gui status as display and cjhange.When the user will click display button the screen will dynamically change to non-editable mode.So I have written the following code.
loop at screen.
if screen-group1 = 'MOD'.
if flag = 'X'.
screen-active = 1.
else.
screen-active = 0.
endif.
modify screen.
endloop.
But it is throwing the below syntax error.
The type of "SCREEN" must be in the type or types of "SCREEN" compatible SEIN.
Kindly give some advice.Hi,
you are missing one ENDIF. and also u should the write the coding in BPO.
loop at screen.
if screen-group1 = 'MOD'.
if flag = 'X'.
screen-active = 1.
else.
screen-active = 0.
endif.
modify screen.
endif. ====> here miss the endif.
endloop.
Thanks & Regards,
Vallamuthu.M -
I have installed Adobe Premier and have an error 126
Can you help please I have installed Adobe Elements 12 and Premier Elements 12. When I try to launch Premier I get and "error 126" message.
You will have to provide system information and other details...
Mylenium -
Hello!
I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
I could really use some help solving this.
I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
Help a brother out, will you???Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
It was for an IPOD so you can see those details in the link.
Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
- Turn off computer.
- Plug Shuffle into usb.
- Then you must reset your shuffle
To reset iPod shuffle:
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
Disconnect iPod shuffle from the computer (if connected).
Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
- Start computer and it should install the usb driver for the ipod automatically.
- Your i pod will say do not unplug so don't. then open itunes and it will be there.
I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
Just remember to not only eject ipod from itunes but stop usb.
Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
Stop it and select "apple ipod".
Maybe you are looking for
-
Hi All, I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then When click on report builder gives error like 'Application validation did not succeed. Unable to continue. and when I try to see details the error summary li
-
Got this message when I tried to play a movie file, and the file wouldn't play: "An invalid public movie atom was found in the movie."
-
Printing issue in Commercial Invoice Report for Oracle Reports Version 6i
Hello All, I am working on modifying rdf for Commercial Invoice i.e. WSHRDINV.rdf for Oracle Apps Version 11.0.3 to display Customer Part and Customer PO as the seeded report do not print Customer Po and Customer Part in its output. I am done with th
-
JDBC and character set convert issue
Hi All, For some special Chinese characters, we will have the "ORA-00933: SQL command not properly ended" error when we try to insert the data into a Oracle ASCII DB. I have been tried to use the "HasQuot='no'" in the tag and the "N'xxxx'" in the dat
-
Exporting full sized files to web pages, ideas?
I have used the Betterhtml plug-in iPhoto to create web galleries of photos that contain links to the the full-sized orginal file. This is how I share photos with my colleagues. I edit in iPhoto, post to a web page with links to full resolution files