HT1926 "Registry settings usef my ITune drivers for importing and burning CDs and DVDs are missing." I have reinstalled Itunes and still get the same message.  What should I do.  bkgee

"Registry settings used by ITune drivers for importing and burning CDs and DVDs are missing."  I have reinstalled ITunes but still get the same message.  What should I do?  bkgee

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Similar Messages

  • When opening iTunes, I get the following error message: the registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes.

    When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes."
    I have reinstalled iTunes twice and still get the message.
    Any clues??
    Thank you.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • ITunes says registry settings for importing and burning CDs or DVDs are missing.

    i get a message after installing itunes 10.7 that registry settings are missing for importing and burning CD/DVDS. Says probably due to installing other burning sofware. Re-install ituenes.  I never installed anything between the older 10.6 and the new 10.7........just updated when it said new Apple software was available.  The update process seemed to delete the 10.6 install and then re-install a new version of itunes, 10.7.  Then the registry settings error message started coming up each time I start itunes. What's the proper way to re-install?
    Thanks for any suggestions.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • The registry settings used by iTunes drivers for importing or burnning.....

    I have installed iTunes 7.3.1. When I start iTunes, I get an error window titled "iTunes Setup Assistant" The text in the window is "The reggistry setings used by itunes drivers for importing or burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall itunes." I then click on the ok button and itunes loads just fine but without the burn option. I have uninstalled Roxio Creator 8, Yahoo Picassa2 and any other softeware that might have a disc burning option. I then uninstalled itunes, rebooted and then reinstalled itunes. I still get the same message. What else can I do to get iTunes to be able to imnport and burn discs?xz

    First try rebooting and repairing.
    Reboot the PC (very important) and then do a repair install of iTunes. In Add/Remove Programs, select iTUnes, click "Change" and then click "Repair".
    If no joy there, check for a device filter conflict in registry, as per the following document:
    iTunes for Windows: Troubleshooting CD issues caused by device filters

  • The registry settings used by theiTunes drivers for importing and burning CDs are missing

    I recently installed a programme to convert audio from a cassette player to digital and I found that my CD/DVD drive was missing. I deleted the offending programme and followed a "fix" by deleting the upper and lower filters as specified in the fix. My CD/DVD drive reappeared but now when I open iTunes I get the message “the registry settings used by theiTunes drivers for importing and burning CDs are missing” even though I am able to import tracks from a CD to iTunes. I haven't tried burning a CD yet but then I hardly ever do. I don't appear to have the problem but the message insists that I do!
    I have removed iTunes and all associated files and folders from my computer and reinstalled iTunes three times but the message still appears every time I open iTunes. I use Vista. Can you help?
    Many thanks.

    I deleted the offending programme and followed a "fix" by deleting the upper and lower filters as specified in the fix. My CD/DVD drive reappeared but now when I open iTunes I get the message “the registry settings used by theiTunes drivers for importing and burning CDs are missing” even though I am able to import tracks from a CD to iTunes.
    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Itunes keeps telling me "the registry setting for importing and exporting and burning cds are missing" reinstall itunes.  I have reinstalled itunes about 30 times and still get the same message.  I do not have another cd burning software loan

    I keep getting the message "the registry settings for importing and exporting and burning cds are missing. Please reinstall itunes. This may be the result of other cd burining software on your computer"  I do not have another CD burning software on my computer and have reinstalled itunes about 30 times and still get the same message and am not able to burn CDs.  All of my drivers and firmware are up to date. Please help

    Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
    The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

  • I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    Hello there, Minig1501.
    The following Knowledge Base article has some information on the message you're receiving:
    Unable to use Apple Push Notification service (APNs)
    http://support.apple.com/kb/TS4264
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • HT1926 Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.'  Well, I've uninstalled and reinstalled 5 times.  Now wh

    Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.'  Well, I've uninstalled and reinstalled 5 times.  Now what?

    I figured it out.  A week ago I had downloaded a screensaver from a website I trusted and that's when my problems started. I uninstalled it but that didn't help.  So, I reinstalled it then used an uninstall softtware app that cleanns more than the control panel does. Then I used a computer cleaner to be sure everything was wiped clean.  And it worked.  I downloded iTunes for the 7th time in 2 days and finally it worked!  And I lost nothing from my account.
    Maybe this info will help others.

  • Keep getting an error message and my new phone wont sync to my old Iphone 4 settings. The message"itunes has detected a iphone in recovery mode. You must restore the iphone before it caan be used on itunes." yet when i do i still get the same message!!!

    The message"itunes has detected a iphone in recovery mode. You must restore the iphone before it caan be used on itunes." yet when i do i still get the same message!!!

    You have to restore the iPod, no ifs, ands, or buts...
    After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
    If you have a good backup you can restore that and you're good to go.
    If you don't have a good backup, then you end up with a "clean" iPod....

  • TS1717 I tried to open iTunes but a box pops up.  In it is written "iTunes cannot run because some of its required files are missing.  Please reinstall iTunes."  I have done so a number of times but nothing is working.  How can I fix this problem?

    iTunes will not open because a dialog box pops up with "Itunes cannot run because some of its required files are missing.  Please reinstall iTunes.". I have done so a few times to no avail.  Any solutions for this problem?

    No you will not lose your content reinstalling iTunes.
    Do this:
    1: Download and run the Registry Cleaner of the free Ccleaner.
    http://www.piriform.com/ccleaner/download/standard
    2: Next follow this Apple document to un-install iTunes
    http://support.apple.com/kb/HT1923
    3: Just for good measure, run Ccleaner again
    4: Reinstall iTunes.
    5: Come back here and click my "Correct answer" button.

  • HT4623 I lost my apps and iTunes after a restore, but it says there isn't enough space on the iPhone 4. How do I know how much space needs to be freed up? I keep deleting photos and videos, but I'm still getting the same message.

    I did an iphone 4 software update. It then asked me to do a "restore" in order for me to be able to use the latest iTunes. I did a "restore" to "factory settings" (this was the only option listed) thinking I'd be able to sync later and get everything back and ended up losing all my purchased apps and iTunes. When I open iTunes, "Welcome to your new iphone" and it says I can re-do the "restore" and choose my lastest update. I assume this will give me back my apps and iTunes. When i choose to do this, it says there isn't enough space on the iPhone. How do I know how much space needs to be freed up? I keep deleting photos and videos from the phone, but I'm still getting the same message every time I re-try. I don't want to delete everything, but I don't know what to do...? Thanks!

    Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

  • ITunes 10.6.1.7: "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." ?

    Fakt:
    iTunes 10.6.1.7 Fehlermeldung: "iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
    Jeder Versuch iTunes zu starten war bisher vergeblich: unter anderem auch das Vorgehen nach Artikel HT1925 der knowledge base.
    Frage:
    Windows XP Neuinstallation und/oder Installation einer älteren iTunes-Version als letzter Ausweg?

    Antwort und Lösung eine Woche später:
    Deinstallation und Neuinstallation von iTunes 10.6.1.7 produziert dieselbe Fehlermeldung.
    Es hilft nur eine Reparatur von iTunes unter Systemsteuerung / Software. Allerdings muss hier Windows XP mit Hilfe von Ausführen / msconfig im benutzerdefinierten Modus erneut gestartet werden - ohne APSDaemon, Avira und Skype zu laden!
    Die Fehlermeldung unterblieb, die Reparatur schritt voran, meldete Erfolg und benannte eine wohl defekte Datenenbank unter C:\Documents and Settings\MyAccountName\My Documents\My Music\iTunes um in:
    iTunesLibrary (Damaged).itl

  • Recently updated itunes to (10.22.14) when attempting to open itunes, it fails to open and I get this message: itunes cannot run because some of its required files are missing. Please reinstall itunes.

    Just updated itunes to (10.22.14) and itunes won't open. I get message: Itunes cannot run because some of its required files are missing. Please reinstall itunes. Is there any other way to troubleshoot this other than reinstalling itunes?

    With that one in that context, I think we should check for malware.
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

  • HT4623 My iPad 4 will not update. I keep getting an error message. I have reset my device. Used iTunes. I still get the same message

    My I pad4 will not update. Keep getting error message. I have reset it and hooked up to iTunes . I still get the same message.

    Have you taken a look at this?
    http://support.apple.com/kb/TS3694

  • TS1717 My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message??

    My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?

    I have the exact same problem.
    I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
    Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
    I'm a Windows 7 user.

Maybe you are looking for