HT1926 Version 11.1.4.62 on WinXP issue: AppleMobileDeviceHelper.exe error message every 30 seconds. iTunes hangs when iPhone4 is syncronized

Version 11.1.4.62 on WinXP issue: I have re-installed iTunes according to instructions. iTunes give me the error message "AppleMobileDeviceHelper.exe has found an error and terminates. Restarting service does not help. Re-installing does not help. iTunes cannot update iPhone4S, iTunes hangs when trying after iPhone syncronization.

See the user tip: https://discussions.apple.com/docs/DOC-6562 for resolution

Similar Messages

I have had to unistall itunes and re install it. Now I get a error message - The file 'itunes library itl' cannot be read because it was created by a newer version of itunes. Help?

I had a prompt to update the software, when this was updated i tunes would not open coming up with a 404 error message. So I uninstalled it, reinstalled the 64 bit version for windows, now it wont open with the mentioned error message.

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
Thanks

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue?

Since I'd installed the new version of iTunes, iCal and Address book do not sync with my iPhone 3GS through iTunes anymore and I get an error message stating that iTunes can not sync with this iPhone. Was must i do to correct this issue and if i must, how dI reintall iTunes without loosing my content?
P.S. I am able to sync postcasts and music though!

http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357

Error message the file "itunes.itl" cannot be read because it was created by a newer version of iTunes.

I had to do a system recovery with a prior date. now I get an error message: the file "iTunes.itl" cannot be read because it was created by a newer version of iTunes. Anyone have a solution?

I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP!

Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP

Did you downgrade iTunes? What version is listed in Help> About iTunes?
If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
If you have iTunes 10.5.2, try re-creating your iTunes library.

Cannot open iTunes-receiving error message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" How do I correct this and access my iTunes?

I am not able to open my iTunes on my HP pavilion dv7-3173nr entertainment notebook: I receive error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes". How can I correct this so that I can open my iTunes on my notebook?? dorothy278

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

When trying up date adobe flash player from 10.1.102.64 to new version 10.2.152.26 i get an error message, "Installer will automatically continue when those conflicting applications are closed: [circle w/line through it] Mozilla firefox."

When trying up date adobe flash player from 10.1.102.64 to new version 10.2.152.26 i get an error message, "Installer will automatically continue when those conflicting applications are closed: [circle w/line through it] Mozilla firefox."

Save the Flash installer to the desktop and close Firefox via File > Exit Firefox.<br />
Start the Flash installer via a double-click on the Flash installer icon on the desktop.
If that still gives problems then see:
* http://kb.mozillazine.org/Kill_application

Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

Hello,
Did you reinstall lately?
My 10.4.11 Drive seemes to have iTunes 7.6.2 on it, have you tried Software update to see if iTunes is listed?
Another 10.4.11 drive has iTunes 6.05 on it... I hate upgrading iTunes, seems worse at every upgrade.
The 10.5.8 drive I'm booted from now has iTunes 8.02 on it.

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

I have just reinstalled Itunes but i get an error message @cant read itunes library .jtl Was created by newer version of Itunes

I have just reinstalled Itunes but i get an error message 'cant read itunes library .jtl Was created by newer version of Itunes'
How do I fix?

Unless you deliberately downgraded iTunes at the same time this may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

HT1926 After successfully upgrading my Apple software, I was able to download iTunes. But I cannot start it up, instead I get this error message, "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." What ne

I needed to upgrade my iTunes to register and sync a iPhone 5c. I upgraded by Apple Software and finally was able to download the upgraded iTunes. When I try to start iTunes I get this message, "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. How can I repair this?

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

When I plug my iPhone 4s into my PC, I get an error message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. Has anyone else run into this problem recently?

When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

I want to go back to the previous 2014.2 version. .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install.

After installing iTunes 10.3.1 it won't open, error message - "the file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes"

new iTunes won't open. Error says cant read iTunes Library.itl becuase it was created by a newer version of iTunes.
I had just installed iTunes 10.3.1 as was instructed by the Genius at the store.

I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

HT1926 Version 11.1.4.62 on WinXP issue: AppleMobileDeviceHelper.exe error message every 30 seconds. iTunes hangs when iPhone4 is syncronized

Similar Messages

Maybe you are looking for