HT1926 Windows could not start the Apple Mobile Device service on iTunes install
Trying to install the latest update to iTunes on Wind 7 x64 box... Died during installation with error "Service 'Apple Mobile Device' failed to start... havee uninstalled itunes and am running a fresh install as Administrator... Get the same message...
Tried to start the Mobile Device service from computer>manage>services but recieve the error 'Windows could not start the AppleMobile... Error 1053 The service did not respond to the start or conrol request in a timely fashion..
Any ideas??? thanks.............
Hello thezerfi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Best of luck,
Mario
Similar Messages
-
its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?
http://support.apple.com/kb/TS1567
-
Could not start the apple mobile device
how do I fix this problem with my Ipod touch. I try to start the apple moblie device then it comes up with. Could not start the Apple Moblie Device Service on local computer Error 109 the pip has been ended
You haven't given anyone any clues about your computer or OS, but if you search this forum for "apple mobile device" you will find some suggestions.
-
itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Windows could not start the distributed transaction coordinator service on local computer
Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
MelvinHi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
\Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang -
Windows could not start the Network Location Awareness service on Local computer
i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
hausHi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support -
SPP 4.30 windows could not start the rwd uperform monitoring service
Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
Windows server 2008. 64 bits
All the installation was ok, but when you try to configure the server it doesn't show the web page.
The rwd uperform monitoring service can not start and send the following error:
Windows could not start the rwd uperform monitoring service error 1067.
Any ideas.
thanks
Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AMHi, thanks for the Help, i am sending the logs.
- <Log>
- <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
<Date>6/27/2011 1:23:09 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
<Date>6/27/2011 5:39:02 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
<Date>6/27/2011 10:59:44 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
<Date>6/27/2011 12:01:15 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
<Date>6/27/2011 1:06:19 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
<Date>6/27/2011 4:17:07 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
</Log>
<configuration>
<appSettings>
<add key="DataSource" value="fifcrsppdb01" />
<add key="Database" value="uperformGlossarydef" />
<add key="DatabaseEngine" value="SQLserver" />
<add key="DatabasePort" value="1433" />
<add key="DatabaseSchema" value="glossaryPublic10" />
<add key="ConnectionModifier" value=";pooling=false" />
<add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
<add key="DatabaseUser" value="glossaryPublic10" />
<add key="Flags" value="0" />
<add key="SMTPServer" value="172.16.3.114" />
<add key="SMTPDomain" value="16.3.114" />
<add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
<add key="HostPort" value="80" />
<add key="HostProtocol" value="http" />
<add key="GlossaryEnabled" value="True" />
<add key="GlossaryUseRTF" value="True" />
<add key="GlossaryDefaultLanguage" value="en-US" />
<add key="VignetteIntegrated" value="True" />
<add key="InstallLocation" value="C:\Vignette\Collaboration\" />
<add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
<add key="DataFolder" value="WWW\RWD\Data\" />
<add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
<add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
<add key="ErrorMaxSize" value="1000000" />
<add key="ErrorHistory" value="30" />
<add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
<add key="PublishingQueue" value=".\private$\PublishingQueue" />
<add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
<add key="ErrorQueue" value=".\private$\ErrorQueue" />
<add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
<add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
<add key="CurrentVersion" value="4.30" />
<add key="TrustAllCertificates" value="True" />
<add key="WebRequestTimeout" value="600000" />
<add key="LdapAuthentication" value="ServerBind" />
<add key="WordtoHTML" value="True" />
<add key="WordtoPDF" value="True" />
<add key="PPTtoPDF" value="True" />
<add key="ExceltoPDF" value="True" />
<add key="WordtoSource" value="True" />
<add key="PPTtoSource" value="True" />
<add key="ExceltoSource" value="True" />
<add key="PublishedContent" value="WWW\ucontent\" />
<add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
<add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
<add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
<add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
<add key="PensListenerPath" value="WWW\uPerformWS\" />
<add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
<add key="EnableDocSIM" value="True" />
<add key="EnableDocXHTML" value="True" />
<add key="EnableDocPDF" value="True" />
<add key="EnableDocWORD" value="True" />
<add key="EnableDocPPT" value="True" />
<add key="EnableCourseSIM" value="True" />
<add key="EnableCoursePDF" value="True" />
<add key="EnableCourseWORD" value="True" />
<add key="EnablePPTXsource" value="True" />
<add key="EnablePPTXpdf" value="True" />
<add key="EnableXLSXsource" value="True" />
<add key="EnableXLSXpdf" value="True" />
<add key="EnableDOCXsource" value="True" />
<add key="EnableDOCXhtml" value="True" />
<add key="EnableDOCXpdf" value="True" />
<add key="SystemPassword" value="" />
<add key="IntegrationEnabled" value="False" />
<add key="IntegrationUserName" value="" />
<add key="IntegrationPassword" value="" />
<add key="IntegrationURL" value="" />
<add key="IntegrationOutgoingPolicy" value="" />
<add key="IntegrationIncomingPolicy" value="" />
<add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
<add key="WebRequestQueryString" value="SMSESSION=NO" />
<add key="SiteMinderCookie" value="SMCHALLENGE" />
<add key="SiteMinderDomain" value="" />
<add key="TivoliCookieName" value="" />
<add key="TivoliCookieDomain" value="" />
<add key="TivoliWebSEALJunction" value="" />
<add key="TivoliWebSEALBaseURL" value="" />
<add key="AuthenticationType" value="Basic" />
<add key="LDAPTimeout" value="10" />
<add key="UserPageSize" value="2000" />
</appSettings>
</configuration> -
HT4236 How do I start the Apple Mobile Device Service?
iPad stopped syncing photo stream. When connected, I get the message, "This iPad cannot be used becamse the Apple Mobile Device Service is not started".
AMDS for Mac http://support.apple.com/kb/ht1747
AMDS for Windows http://support.apple.com/kb/TS1567 -
When trying to sync to itunes I get a message it can not because the Apple Device Services is not started. How do I fix it?
Type "Apple Mobile Device Service" into the search bar at the top of this page by "Support" and read the resulting help articles.
-
This iPod cannot be used because the Apple Mobile Device service is not started.
When I plug into my computer and try to sync with iTunes, I get this message. "This iPod cannot be used because the Apple Mobile Device service is not started." I can not find away to start the Apple Mobile Device service. I synced last on 2/4/12 with no problem. How do I start this service so I can sync my iPod?
Hi,
See This Article:
AMDS for Windows
http://support.apple.com/kb/TS1567 -
How do I start the Apple Mobile Device service? or maybe I shouldn't get it. I recently downloaded a Netflix app thinking it would work on my older iPod running version 3.1.3 and is only a 8 Gig device. Could this be my problem? The device doesn't even show up in "My Computer" or under devices in iTunes. Any help would be appreciated?
See this article for instructions on restarting the service (or re-installing if necessary).
http://support.apple.com/kb/ts1567
B-rock -
When trying to sync my iPad my computer says this iPad cannot be used because the apple mobile device service is not started. How do I start the apple mobile device service?
Follow this article: How to restart the Apple Mobile Device Service (AMDS) on Windows
-
I have had my iphone for almost a year and have not had this problem below. When I connect my phone to itunes I get the below error message.
This Iphone cannot be used because the Apple Mobile Device Service is not started.Type " Apple Mobile Device Service " into the search bar at the top of this page by "Support" and read the resulting help article.
-
Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer
I have 2 instance of SQL Server in same server. A is installed first and B next.
Somehow A cannot start at all when I try to start from Windows Services.
B can be started normally.
A worked normally week ago. There has been only one thing what I may have to server since that.
I have installed MondoDB. Currently MondoDB it is stopped.
windows could not start the SQL Server (MSSQLSERVER) service on Local computer
Error 31: A device attached to the system is not functioning.
Kenny_II don't see anything special in event logs.
Data file of both SQL Server instance are located on same C drive of same server.
Kenny_I
Hello Kenny,
The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
I serached
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have a new iPod touch and when I connect it to my pc and itunes, a window says "this ipod cannot be used because the Apple Mobile Device Service is not started."
This might help restart it http://support.apple.com/kb/TS1567
Maybe you are looking for
-
Vendor Put on SPL block after PO
I have a doubt , during the PO creation in R/3 and the custom doc creation in GTS vendor is not blocked but during the GR the business moves the Vendor to blocked list. In this during GR will there be a SPL screening happening, for this do we need to
-
Sharing Hard drives across network
I recently set up my new house's network and set up one macbook to share my 2 external hard drives across the network I have also set it up to share a partition of the internal hard drive. When I look at the shared folders from my other macbook all i
-
MRU fails with no failure messages
Hi, I have a tabular form based on a table. When I make some changes on some data of the form and press submit button, I am redirected without any success or failure messages and see that no changes are saved. Table on which the form is based on has
-
9.2.0 OCCI's setString Won't Work, Need Help w Thks
Start exploring occi.h (oracle version 9.2.0) but hit a problem w no clue to solve it. #include <iostream> #include <occi.h> using namespace oracle::occi; using namespace std; int main() // declare Environment, Connection, ResultSet, Statement env=En
-
VISA GPIB problem after switchig from NT- W2000
application was written in LV 5.0.1 and run under NT for several years without problem. After installation of Win2000 the VI's communicating with instrr (GPIB) via VISA are not working.