HT1933 I follow these steps but it redirects to me to itunes and says "Your request produced an error [newNullResponse] please help an expensive app was purchased and wasnt supposed too!
I follow these steps but it redirects to me to itunes and says "Your request produced an error [newNullResponse] please help an expensive app was purchased and wasnt supposed too! I really need help asap
Use this Link to Contact iTunes Customer Service and request assistance...
Apple Support iTunes Store Contact Us
Similar Messages
-
When I try to download games eg. Dreamland HD light it says the following: your request cannot be completed. Please help.
Honestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
My daughter forgot her password but her iPod was never synchronize with my iTunes library. We have followed the suggested steps but when it comes to restoring the settings it says 'cannot connect to iTunes support server'. We can't get any further than this. Any suggestions?
Was it really update server?
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
any thoughts on this problem, I find no version stated on the photoshop elements program. sorry it says internet explorer 4 or higher need which is what I have.
Message to use a new version of IE
There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10) -
Help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Follow These Steps To Always Lose Sound Effects With 10.5.6
I can lose sound effects on Mac OS X 10.5.6 by following these steps. Can anyone else also lose their sound effects? This problem has existed for me on many releases of 10.3 and 10.4.
1) Enable Fast User Switching.
2) Login as user1 and note that sound effects work.
3) Without logging out as user1, login as user2 and note that sound effects work.
4) Without logging out as user2, go back to user1 and note that sound effects still work. Then logout from user1.
5) Go back to user2 and note that sound effects no longer work.
6) Reboot system to restore sound effects.Can anyone reproduce the lost sound effects problem?
Thanks. -
Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives. -
I already try these steps but I still got the problem I can't make a video call at all or receive .
Here som other steps you can try;
Make sure that you have an internet connection
Make sure that you have a valid Apple ID (check here: myinfo.apple.com). Note that your Apple ID to register FaceTime on iPad 2, iPod touch, or FaceTime for Mac must be an email address. You can create a new Apple ID or make changes by visiting myinfo.apple.com and using the “Manage your Account” part.
Tap Settings > FaceTime to see that your email address is verified. If your status is saying “verifying,”; then try toggling FaceTime off and on (Settings > FaceTime OR FaceTime for Mac: FaceTime > Preferences)
Try turning FaceTime off and on again using the following (iOS: Settings > Phone OR FaceTime for Mac: FaceTime > Preferences)
Make sure that FaceTime is enabled (Settings > FaceTime.)
Make sure that the camera for FaceTime is not restricted (Settings > General > Restrictions.)
Tap Settings > General > Date & Time to check date and time are set correctly.
Make sure that you are using the correct method for calling the person. iPhone user: Use the phone number; iPad 2, iPod touch, or FaceTime for Mac user: Use the email address -
I've this problem and don't know what to do , i'n trying to follow these steps so i'm asking how to turn off photo syncing and to sync my device
As the article you attached says, "Within iTunes, select the device, then select the Photos pane and turn off syncing."
In other words, once you click on the device in iTunes on your computer (with the iPhone attached), you then click "Photos" near the top and uncheck the "sync photos" box.
Then you sync your device by clicking something in the lower right (it probably says "Apply", but it might say "Sync"). -
Follow These Steps To Lose Sound Effects On 10.5.8
I can lose sound effects on Mac OS X 10.5.8 by following these steps. Can anyone else also lose their sound effects? This problem has existed for me on 10.3, 10.4, and 10.5. Is there a daemon I can restart that will restore sound effects without a reboot?
Thanks.
1) Enable Fast User Switching.
2) Login as user1 and note that sound effects work.
3) Without logging out as user1, login as user2 and note that sound effects work.
4) Without logging out as user2, go back to user1 and note that sound effects still work. Then logout from user1.
5) Go back to user2 and note that sound effects no longer work.
6) Reboot system to restore sound effects.Can anyone reproduce the lost sound effects problem?
Thanks. -
it's not working, my itouch freezes on the main menu "unlock" i did these steps but it just won't do. what should i do?
- Try placing the iPod in DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next, try restoring on another computer. -
. This error message pops up in Photoshop when i just wanna create a new plain white template. I have downloaded agentransack to track down the temp files and for some reason it says nothing matches the temp files.I have a couple of drives including 2 SSD's. I've try to fix this many times following different steps but none of them work and my disks equal to over 250GB. Please help. ( I am running windows 7 proffesional) 64 bit
Good day!
my disks equal to over 250GB.
What’s relevant is the space on the disk/s you have assigned as Scratch Disks – what are they (Phortoshop > Preferences > Performance > Scratch Disks)?
Regards,
Pfaffenbichler -
I have created an iMovie but cannot share it. I have looked at the help menu and have tried to follow these instructions but cannot get the sharing button to open anything.
Do you have MacKeeper installed? If so, you need to uninstall it. There is a known issue where MacKeeper disables all the sharing functions from the new iMovie.
Uninstall MacKeeper, then re-install iMovie.
Keep MacKeeper uninstalled. -
Have followed the steps but still could not convert my Pdf to Word
Have followed the steps but still could not convert Pdf to Word
You need to update it from iTunes on a computer.
(73555) -
my iphone 4 has this same issue, did these steps but when it was doing the software update, half way through my phone still wouldn't move pass the apple logo. help!
Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
Maybe you are looking for
-
Passing prompt value to column header
Hi experts I'd like to change the column header dynamically. the report is using presentation variable so it's displayed after the user had selected a value in the dashboard prompt and clicked on go. I'd like to have in the column header the value th
-
I have Vista OS on my Dell Inspiron laptop. When iTunes is open and it's window is in the background, when I then bring iTunes to the front, the screen is black. It stays black until I Minimize, then Maximize the iTunes window. Is there a fix for thi
-
Getting started with a new Integration project
Good day all! I am just in the beginnings stage of a development project for an enhancement to the CRM OD system. This project is related to the Opportunity and Product Revenue (PR) objects. In a nutshell, here is what I need to do. We have a custom
-
How to use JDBC Appender of log4j using a properties file
Hi, I am trying to implement the Log4j JDBC Appender to log the messages to Database(oracle).Can anyone provide me with a sample code along with the properties file used. need urgent help. Thanks in advance
-
Reg: Closing a popup from other DC
Hi, I'm having a DC(operations). In the view of that DC operations im having a link, on action of that link i'm opening a popup. that popup window has a viewcontainer and inside which i have embeded another DC(createprc). The popup is getting opened.