HT1937 How do I or where do I input a sim swap code?

I'm trying to unlock my iphone 4 and have put a new sim card in,  I have been sent a sim swap code but there are no instructions as to how or where I put this in.  Can anyone help?

There is no such thing as a sim swap code to unlock the iPhone.  Only the carrier to whom the phone is locked can authorize the unlocking.  Anything else, including the "sim swap code" is purely a scam.  I hope you didn't spend too much money on this, but you've been had.

Similar Messages

  • HT1937 how to make iphone to iphone video call through sim card

    how to make iphone to iphone video call through sim card??

    use facetime to video call or any other app for that. you should have an cellular data connection or wifi to use this

  • How to find out where used list of Table or T-code

    Dear ABAP gurus
    I know many of you have done this several times.
    wish to find out which Transaction code INSERTs the data into the table IHPA.
    I did the where  used list - SE11 ( for specific key work called INSERT ).
    Used the Table called D010TAB which has some information.
    Vise versa if I know a T-CODE , how to know which tables it read  & Modify...
    any better procedure than spending hours in research...
    I found similar custom program to find USER EXITS ...here..., looking soething similar...
    [http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
    thank you for your help
    Edited by: Raj Anvesh on Aug 3, 2011 9:58 PM

    Hi Anvesh,
    Maybe the data INSERTION is happening by BAPI,
    So just try to look for the concerned BAPIS.
    ECP_SRV_PARTNERS_IHPA
    IREP1_IHPA_ADRNR_PRE_FETCH
    IREP1_IHPA_ADRNR_READ
    MAP2E_DIIHPA_TO_PARTNER
    MAP2E_IHPAVB_BAPI2080_NOTPARTE
    MAP2E_IHPAVB_TO_BAPI_IHPA
    MAP2E_IHPA_BAPI2080_NOTPARTNRI
    MAP2E_IHPA_M_BAPI2080_NOTPNRI
    MAP2I_BAPI2080_NOTPARTNRI_IHPA
    MAP2I_BAPI_IHPA_TO_IHPA
    PM_DB_FILL_DIIHPA
    PM_PARTNERCOPY_FILL_XIHPA
    PM_PARTNER_DELETE_XIHPA
    PM_PARTNER_GET_XIHPA
    PM_PARTNER_PUT_XIHPA
    PM_PARTNER_REFRESH_XIHPA
    these are the bapis which are dealing with the IHPA table,
    Segregate them as needed and then go to the std program
    Revert for further clarification.
    Thanks
    Sri

  • How to find out where a table is used in the code ?

    I have a huge database, and I am adding a column to a table...
    is there a query to find out if this would impact the code ? I mean I want to find all the places in the code with
    insert into mytable, or update mytable.....
    how to include both insert into mytable, and update mytable in dba_source ?

    Use DBA_DEPENDENCIES:
    select owner,name,type from dba_dependencies where referenced_name = 'TABLE_NAME'
    and referenced_owner = 'TABLE_OWNER';For example:
    SQL> select owner,name,type from dba_dependencies where referenced_name = 'EMP'
      2  and referenced_owner = 'SCOTT';
    OWNER                          NAME                           TYPE
    PUBLIC                         TABLE1                         SYNONYM
    SCOTT                          SELECT_EMP                     PROCEDURE
    SCOTT                          EMP_DEPT_VW                    VIEW
    SCOTT                          PP                             SYNONYM
    SCOTT                          EMP_MV                         MATERIALIZED VIEW
    SCOTT                          EMP_VIEW                       VIEW
    6 rows selected.
    SQL> However, keep in mind DBA_DEPENDENCIES stores statis references only. If your code references table in question in dynamic SQL you will have to parse DBA_SOURCE and in some cases, even that will not give you all answers.
    SY.

  • HT1937 how do activate an iphone 4 without at&t sim card

    how do i activate iphone without att sim card

    Activating an iPhone requires a compatible SIM card. The SIM card does not need to be activated or have time on it, just from the carrier that the phone is locked to.

  • HT1937 how to unlock my iphone4 to work on any sim?

    My iphone 4 doesnt work i want to unlock it so i can use it on any sim cards,i live in Tripoli libya right now and our carrier here is Almadar and Libyana only
    thank you

    Contact the carrier it's locked to and find out if they offer this service and if you qualify.
    ONLY the carrier it is locked to can authorize unlocking it.

  • How and where to define Char Value for Industry code for the customer

    Hi All,
    How to define and where to derfine Characteristic value for Industry code (KNA1-BRAN1) field
    for a Customer.
    As while PGI I am getting error message that Characteristic value for Industry code 00008
    does not exist.
    Rishi

    Solved

  • HT1937 how and where do i put the sim card

    how and where do i put the sim card

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    Page 12.

  • When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

    When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to? 

    It's not necessary to change the Command N keystroke..
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • I have rented a movie on my ipad. It did not download due to not being on wifi at the time.  I know I completed the rental because my gift card balance went down $3.99 plus tax.  How do I find where to download the movie?

    I have rented a movie on my ipad. It did not download due to not being on wifi at the time.  I know I completed the rental because my gift card balance went down $3.99 plus tax.  How do I find where to download the movie?

    But now I can't find the actual movie...I go to iTunes to purchases and view movies , to downloads and searched the title of the movie...I can see an icon of it and it is in a separate place from other purchases but it says downloaded in faded lettering. Where is it?
    If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

  • How can I determine where to publish each comment in my website?

    How can I determine where to publish each comment in my website?
    I have one form for the comments, but I want to show them in different webpages depending on the user choice
    for example, I created 6 pages blue circle, pink circle,  green circle, blue square, pink square, and green square,so  the user chooses pink or blue or green from one menu and circle or square from another menu which determine which page it will be displayed on.
    you can see the form on the bottom of this website  www.assori.com
    thanks for any help

    It's my fault, I lost you there.
    See I wrote the steps as they were in  "Adobe Help" so please forget about the last comment.
    I chose the "advanced mode" because I have more than one menu to filter (shape and color) 
    lets say I want the comments on my website to be displayed conditionaly, and I have two lists one for colors (blue and pink) and other for shapes (square and circle), 
    So I'm going to have four pages each page has its own recordset, let's say now I want to filter the recordset for (Blue Circle) page 
    I don't know how to do it but by following the steps in Dreamweaver help: 
    -Select name, and click the Select button. 
    -Select content, and click the Select button. 
    -Select shape, and click the Where button. 
    -Select section, and click the Where button. 
    -Select time, and click the Order By button. 
    this is how the SQL statement look likes:
    SELECT mytable.name, mytable.contents
    FROM mytable
    WHERE mytable.shape='circle' AND mytable.`section`='blue'
    ORDER BY mytable.hdw_serverTime 
    then to Define the variables 'circle' and 'blue' :
    by clicking the Plus (+) button in the Variables area and entering the following values in the Name, Default Value, and Run-Time Value columns:
    circle,square,Request("circle")
    blue,blue,Request("blue") 
    Also I understand that I have to define a parameter but which (URL or Form) and how?  I don't know 

  • When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme.  How do I change where appointments are put ?

    When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme.  How do I change where appointments are put ?
    Or how can I choose where the appointment is put ?
    I use the mobileme sync services so the ical calendars that are synced are those in the "[email protected]" group.
    Please help !
    Nick

    Actually you can't drag the appointment to ano calendar - its says "You can’t make changes to this invitation., Only the organiser can change this event"
    Also if you double click on the received appointment and open the window the only calendars shown that you can select are the 'on my mac" ones, and not the sync'd ones.
    Any ideas welcome !!
    Nick

  • I had bought a Mac PRE 13 in,  in 7th Sep,but it is 15th Sep today,how doesn't my computer come to me? So,how can I check where the computer is at this moment?

    I had bought a Mac PRE 13 in,  in 7th Sep in the online Apple Store,
    but it is 15th Sep today,how doesn't my computer come to me yet?
    So,how can I check where the computer is at this moment?

    Call the online Apple Store.  You should have received an email with a FedEx tracking # if you are in the US.
    There is nothing anyone can do for you on a message board!  We are all end users just like yourself.

  • I've "successfully" installed the latest version of Flash Player. How do I find where it "lives" so that I'm certain it's in there. Also, do I put the App icon in the trash now? (I am on a Mac) Thank you!

    I've "successfully" installed the latest version of Flash Player, as recommended by Firefox. How do I find where it "lives" so that I'm certain it's in there. Also, do I put the App icon that appears on my desktop, in the trash now? I am on a Mac and I am not technically inclined.
    Thank you!

    Your list of plugins shows that you have installed Flash 10.2 r152 which is the current release version.
    You can also confirm that Flash is installed by visiting this link - http://www.adobe.com/software/flash/about

  • How can I learn where a missing class resides?

    I'm going thru a tutorial that autogenerates a few small Java source files in a small project. They SHOULD compile without error, but don't, apparently because various classes are referenced and are not present on my PC.
    How can I learn where they are? How can I get the needed classes, and can I trust the files I find, assuming I find them out on the web somewhere.
    The message of the moment (produced by NetBeans 4.1) is:
    "class com.sun.xml.rpc.tools.ant.Wscompile cannot be found"
    I plugged that classname into Google, and found someone wonder in a forum where this class is, then reply to his own question saying he found it in jaxrpc-impl.jar
    Maybe that's right. Now I have to find this Jar file.
    Hopefully there's a better way to find this stuff!
    Any advice appreciated.

    That's how you do it.
    In this case, I believe that the jar is part of the JAX_RPC functionality (recently renamed to JAX_WS), and a copy is included with Sun's Application Server - and also other downloadable packages, but I don't know exactly which others.
    The class is part of the umbrella J2EE system.

Maybe you are looking for