HT1937 i am unable to make outgoing calls

I am unable to make outgoing calls, my carrier is a MTN and i have recently bought the phone

You are posting in a 14 month old thread.
Parampal Singh wrote:
I updated device after that it happend 2/3 days was good
See the Thread YOU started where assistance is being offered for YOUR issue.
https://discussions.apple.com/message/22414503#22414503

Similar Messages

  • I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

  • My phone is unable to make outgoing calls, receiving them and sending and receiving both SMS and IM are all ok? Anyone have solutions?

    I have an IPhone 4 , which is on a Vodafone network, when I try and make outgoing calls it says 'call failed' . I am still able to send/receive SMS and IM and receiving calls is also so problem, does anyone have any solutions?

    You need to contact Vodafone.

  • VCS-E unable to make outgoing call with search rule not found error

    Hi 
    I deploy telepresence device registered to CUCM and connect with VCS-C and VCS-E. The issue now is I am not able to make outgoing call and my search rule show not found, request time out.
    I use DNS zone to make the outgoing call and my VCS-E is able to resolve DNS SRV record. However search rule result show not found.
    Any advise are appreciated.

    Hi
    I managed to make a call to address that I am trying to reach. But it supposed to come up with PIN number to enter instead I saw the message that no incoming video.
    Can you please advise what could be the issue.
     tvcs: Event="Call Connected" Service="SIP" Src-ip="10.84.83.101" Src-port="27224" Src-alias-type="SIP" Src-alias="sip:[email protected]" Dst-alias-type="SIP" Dst-alias="sip:[email protected]" Call-serial-number="24a63c27-42b4-4950-ba02-6a548b279a09" Tag="f060faef-441f-47a2-9c75-e1b0623b5e14" Protocol="TCP" Call-routed="YES" Level="1" UTCTime="2015-02-25 14:38:32,604"

  • Changed my #, now unable to make outgoing calls or text

    I recently changed my phone number (because I moved to another state) and now am unable to make calls and text.  After changing my number online, I dialed *228 and option 1. It said my phone was now active, but when I try to call, I get "your mobile member is not active or is invalid". 
    I changed my number again via MyVerizon online (since it is free), in hopes this would correct any issues.
    Turned phone off and on a bunch of times like it instructed me to do (I have an iphone 4 16GB).
    I am still receiving this message.  "your mobile member is not active or is invalid".  What should I do.  Thanks.
    G-

    Problem fixed itself 4 hours later, go figure.  Shrugs @ Verizon.  Working now.

  • PAP2T unable to make outgoing calls

    I recive incomming calls, no problem.
    When I pick up the phone to make an out going call I hear the dial tone.
    When I dial any number I am told the number is not available, or the phone sounds the engaged tone.
    I use my SIP with X-Lite V3 and have no problems making outgoing calls.
    Please let me know your thoughts.
    Kind Regards,
    Jason

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • IPhone unable to make outgoing calls after 2.2.1 update

    After updating to the 2.2.1 firmware I am unable to make calls with my iPhone. I have reset it with the backup I made and as a fresh backup and the problem has still not been resolved. The problem only began after I updated. Help?

    i had exactly the same problem, i had to send it back to apple via O2 and they had to give me a new iPhone, now ive got one that works on 2.1 im not updating it till the next update comes out!
    so yeah take it to your nearest O2 store and 3 weeks later everything should be sorted

  • UC520 SIP trunk unable to make outgoing calls, incoming calls are ok

    I have an new SIP trunk set on an UC520 and the incoming calls are ok, but the outgoing calls are getting an busy tone(not working).
    The bellow trace is showing that the cause is "No route to destination (3) ". The question is this route has to do with the firewall(ip routing) or with the voice translation rules?
    001866: //3439/91242E51926F/SIP/Call/sipSPICallInfo:
    The Call Setup Information is:
    Call Control Block (CCB) : 0x843CE50C
    State of The Call        : STATE_DEAD
    TCP Sockets Used         : YES
    Calling Number           : 0777777777 <- main sip number
    Called Number            : 0888888888 <- called number
    Source IP Address (Sig  ): 0.0.0.0
    Destn SIP Req Addr:Port  : 0.0.0.0:0
    Destn SIP Resp Addr:Port : 0.0.0.0:0
    Destination Name         :
    001867: //3439/91242E51926F/SIP/Call/sipSPICallInfo:
    Disconnect Cause (CC)    : 3
    Disconnect Cause (SIP)   : 200

    Hi Emil,
    I've added bind control and media interface but outgoing calls are the same blocked, strange thing is that the cause is still no route to destination (3)
    but
    UC_520#show sip-ua status
    SIP User Agent Status
    SIP User Agent for UDP : ENABLED
    SIP User Agent for TCP : ENABLED
    SIP User Agent for TLS over TCP : ENABLED
    SIP User Agent bind status(signaling): ENABLED 10.10.10.5 <- fa0/0 IP address
    SIP User Agent bind status(media): ENABLED 10.10.10.5 <- fa0/0 IP address
    SIP early-media for 180 responses with SDP: ENABLED
    SIP max-forwards : 70
    SIP DNS SRV version: 2 (rfc 2782)
    NAT Settings for the SIP-UA
    Role in SDP: NONE
    Check media source packets: DISABLED
    Maximum duration for a telephone-event in NOTIFYs: 2000 ms
    SIP support for ISDN SUSPEND/RESUME: ENABLED
    Redirection (3xx) message handling: ENABLED
    Reason Header will override Response/Request Codes: DISABLED
    Out-of-dialog Refer: DISABLED
    Presence support is DISABLED
    SDP application configuration:
     Version line (v=) required
     Owner line (o=) required
     Timespec line (t=) required
     Media supported: audio image
     Network types supported: IN
     Address types supported: IP4
     Transport types supported: RTP/AVP udptl

  • Ios 8.0.2 unable to make outgoing calls

    I recently updated to ios 8.0.2 when I click on the phone button to see my recent calls, voicemail, or to dial a number the screen opens and immediately closes again.  I have restarted my phone but it didn't work either.  Any help?

    i can't make calls on my iPhone 5 with iOS 8.0.2
    I can receive, but not place calls with my phone after updating from iOS 7.1, to iOS 8.0.2. The green dial button becomes a darker shade when I press it, but then reverts back to bright green when I let go. Calling numbers or contact with Siri doesn't work either. not sure what to do...

  • Can't make outgoing calls

    Hello
    My problem is that whenever I dial a number I get the engaged tone and am told “the number is busy and to use ring back press 5”. I can still receive incoming calls. Have checked the line and there are no reported faults, BT line checker says the line is fine. Have plugged the phone direct into the master socket but still unable to make outgoing calls. Have checked to see if there's any call barring in place but upon entering the * # 34 # am told “this feature is not available”. Have tried cancelling all the other call features detailed in the “calling features user guide” but am still unable to make outgoing calls. No matter which number I dial I get an engaged tone and am offered the ring back service. Please help! Many thanks in advance.

    Hi
    As you have tried different phones in the test socket it does sound like the fault is not with your equipment. I suspect that it is an exchange fault and not a line fault.
    You will now need to report the fault to your comms provider, If it is BT call from your home number on 151. I suspect that when you report the fault the line will be tested and it will test ok as the test they run is only a physical line test and as I said I suspect it is an exchange fault. Just be persistent as they will insist there is nothing wrong.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    Good day Sidharth Namrta,
    It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
    iPhone: Troubleshooting issues making or receiving calls
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update. 
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap  Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My iphone 5 won't make outgoing calls

    my iphone 5 won't make outgoing calls....i tried to restart network settings and then my whole phone all together....also i tried on wifi and off wifi and it wont ring......What should I do????

    Settings > General > Reset > Reset Network Settings.
    Shaker Ahmed wrote:
    whats can i do any one from apple suprted replay mee fast
    These are user to user support forums, as clearly stated in the Terms of Use that we all agreed to when signing up here.  Apple does not read or respond here.

  • How can i hide my extension number when i make outgoing calls

    Hi All,
    How can i hide my extension number when i make outgoing calls,what configuration should i make on the call manager server.
    Regards,
    Lester

    We use a Route Pattern that mimics the telco feature *67. The RP is *679.xxxxxxx with a Transformation mask of 000000000 (just to get beyond the individual blocking on some private lines.

  • I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

  • IOS 8.02 not letting me make outgoing calls

    I don't know what's going on. At first I thought it was a fail-safe when bad I was in bad service. But even on LTE my phone REFUSES to let me make outgoing calls. I can't even type in the number and call. Any way I try, it fails. Won't even pull up the dialing. Just registers as an empty press.
    HELP! I can't even call Apple support.

    try a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    then check again.

Maybe you are looking for