HT1937 i have iphone 3gs u.s and i updated the ios after that the tel. was locked ? what can i do?
i have an i phone 3gs and i updated the ios the phone locked ? what can i do ?
Locked in what way?
Similar Messages
-
I Have updated my ios after that the message was showing that "could not active iPhone"
please help me
how to activate my iPhoneIt's probably because the phone was jailbroken or hacked to unlock it. The update has bricked it.
-
i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?
but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?
-
I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.
On your iPhone, try toggling Find My iPhone off, then back on after a few seconds.
-
HI all,
My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones..plz helpsounds like the fall caused some damage. get it replaced through apple
-
My Iphone 4 suddenly blackout and restart by itself. After that it reach the restore screen. Tried to do restore but it come out Error (9). Anyone can help?
I tried to restore in normal mode and DFU mode, both of it still give me error (9).
I tried using other cable and computer but it still the same.
Anyone out there having the same issue that can share?
Is this a hardware or software issue? My warranty already over and have to solve this problem by myself.
Please help.Did you check your security software settings?
Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
copied from Update and restore error messages on iPhone and iPod touch -
Why can,t I bluetooth pair my iPhone 3GS with my new iPad, it does not even show up as discoverable. What can I do to fix this
For what purpose are you trying to pair them?
Only supported peer to peer apps such as photo transfer or multiplayer games can connect to other iOS devices via Bluetooth. You initiate the connection inside the app running on both devices. -
My iphone5 stopped receiving calls and text messages then a message said my sim is locked what can I do?
You can call you're carrier and have them unlock it.
-
my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?
Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?
Your phone was jailbroken. You can't get help here.
In VERY RARE circumstances, this may indicate a hardware failure. -
Respectable Apple suppot Team,
I need a help from you my problem is that recently i update my iphone software my last software version is ios 4.2 and i update with ios 6.0 through itunes,
when my iphone software was update my iphone was locked please tell me the solution who can i unlock my iphone.
I use Apple iphone 3GS 16 gb
Model No: A1303 FCC ID:BCGA1303A IC ID:579C-A1303A
Serial No: 86******YNP
Please resolve my problem i am very worry about my ipone
Regards,
Ahmad Salman.
<Edited by Host>Sounds like your iPhone was hacked to work with other than
the original cellular provider and the update relocked the iPhone
to that provider. You must contact that provider to see if they
offer unlocking and if you qualify. Only the cellular provider to
which the iPhone is locked can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Where/how did you acquire this iPhone? Who is your wireless
provider?
Not wise to post your Serial Number in the clear - I have asked
the hosts to remove it. -
Have a iPhone 3GS from australia given to me by my sister. I live in the UK and it won't accept my pay as you go sim card. I don't know which network it is locked into. What can I do to unlock it?
Your Sister will have to arrange for the iPhone to be unlocked in Australia
If it can be accomplished whilst iPhone is in UK
Fortunately all the Aussie carriers do offer unlocking -
Hi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
KulbirfromhuntingdonHi - can someone help please? I recently update to ios 5 from ios 4.3 and updated Itunes to 10. On restart and configuration as part of activation process, it tells me that activation is not possible and itunes tells me that iphone does not have a sim card (it does). I seem to be stuck - can anyone please help?
Kulbirfromhuntingdon -
Iphone 3gs is suspended and enters recovery mode ios 6.1.3
I have an iphone 3gs with ios 6.1.3 update works well while you are discontinued on but the phone enters recovery mode, can not turn it on or off and when I connect it to the computer does nothing, I have restored several times since itunes when but the flaw allows continuous, wanted to know if there is solution to the problem. thanks
"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked. -
Iphone 3GS is restarting and no texts or calls after iOs5
Hello,
I got the iphone 3GS I just upgraded it 2 weeks ago to ios5. It's been giving me trouble since then. It's ok for a few days after that it starts to restart like every 3 mintutes. I can't make any calls or send text messages during this. I have restored it 1 week ago. Everything was fine but after a few days again it started the same thing. I am now restoring again and deleted my copy of ios5 on my computer. I hope they release an update for it. I called Apple about it they said they have got alot of complaints about it. I hope they release a patch for it. It seems to be something to do with the charging system. It acts up when i turn it off for the night to charge it. I kept it on for the last 2 days and it was fine, today I ran out of battery life. I plugged the phone in and the restarts started again.Check for debris in the receiver, use a stiff brush and give it a lil clean. Also, if you have a case on your iphone, try removing it. Any case that comes over the top of the iphone and gets any where near the receiver can cause issues with sound and the proximity detector. Even if you don't think it covers the receiver, still try removing it and test... 8 times out of 10, this is the issue.
Maybe you are looking for
-
LightRoom 4 Trial: Develop not working
Hi There. I just downloaded the Trial Version of Lightroom 4 for mac. I imported photos and they in a catalogue. When i select a photo then click the "Develop" tab I get a message that says "no image selected". I have watched a few different videos a
-
How to load external swfs in air for android?
All swfs have actions in thier timeline.
-
Oracle purchasing attachments gives error
I am trying to load an attachment to a PO and gets an error Required database login or file information is missing. The Attachment File Directory profile option is set to a directory in the web server. I understand that the web server should have per
-
ReferenceError: Database is not defined
Is the following syntax correct? Database.ExecSQL("INSERT INTO CRF (TodayDate, SubmittedBy, Region, Market, DoorDepartment, ProjectEvent, ProjectType, RenderingsDue, FinalArtworkDue, EventDate, EventDays) VALUES ('" + TodayDate.rawValue + "', '" + Su
-
Looking To Change the Defaults for Placing Options Indesign CS5
I have just started using CS5 and have a question. Right now when I go to place a PDF into Indesign the program always defaults to crop or image. I would like that to default to media. We place dozens of PDFs and waste time selecting options an