HT1937 please help me to find my lost iphone 5 .its switched off

please help me to find my lost iphone 5 .its switched off
i can provide you by serial number

if find my iphone was enabled on the device then you should be ok, log into icloud and select the find my iphone, on the devices tab click the device in question, if a location comes on the phone is swiched on, if not and the phone is turned off select the email whan found option and also i would send a request to wipe the phone and send a alert to the device so if any one turnes it on they will see the message that it is stolen

Similar Messages

Found: Help a user find their lost iPhone

hello,
not being an apple addict i don't really know how to help a locked lost iPhone find its owner.
+are there any services or forums to help this phone get home?+
(already posted on CL)
-c

Please pardon my offense. I do agree it could have been taken badly and sounded a bit too harsh. I apologize. I have also have family and friends who have been, or still are, LEO's.
I am not saying they are dishonest. But in these economically tough times where electronic devices are reduced to almost less than commodity status there has to be a setting of priorities. Realistally I see the return of a mobile phone to be much less important than following up on paperwork for a robbery or rape.
There is also the matter of personal responsibility for the individual citizen. I think the individual should take the first initiative whether it's returning property, voting, or protecting themselves. I my opinion the Police and other goverment organizations, are there to assist society, not be its first line of response or resolution.
I'm glad you pointed out my remarks tonight. It is an indication you were a fine officer, and better still, a fine person looking to help others correct their mistakes. (even while being offended)
-c

How to help someone find his lost iphone

How to help a friend find his lost iphone ?
Item lost is iPhone 4 with iOS 6.1 installed.
iCloud is not set on the device, but have the imei no.

If icloud was not set of the device (and thus the "find my iphone" service was not turned on), then there's nothing you can do to find the lost device except help the friend search the house and other areas - in other words, there is no technology that can help.
Be sure the friend has contacted their carrier to have them shut down service and possibly contact the police.
Knowing the IMEI is of no help to Apple, they do not track these nor serial numbers.

HT1937 I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD. Thank U

I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD.
<Personal Information Edited by Host>

If you didn't set up Find My iPhone, there's nothing we can do to help you. Sorry.

Please help me to find my iPad and iPhone 5C. I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends".

Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.

Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason

I lost my Touch I pod. Please help me to find it.

Please help me to find my i pod.

Is your iPod online or offline? If it's offline or physically turned off; no power. Your only option is to physically go look for it. If your online and you set up find my iPhone with iCloud you should be able use that to help you, BUT if you did not set this up before you lost the iPod, I believe your back to physically go look for it, sorry. Good luck.

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

I need to swich from us store to saudi arabian store, please help me to find solution.

i need to swich from us store to saudi arabian store, please help me to find solution.

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Please help me in finding link to downlaod oracle BI discover

Please help me in finding link to downlaod oracle BI discover
i didnot find discover in obiee so where can find
Thanks in Advance

Hi,
Discoverer is part of BI Standard Edition. You can down load BI from here. You need the 2 CDs for Discoverer Plus and Viewer and the Tools CD for Discoverer Admin and Desktop.
You should also apply the patches to go to the latest version. The LearnDiscoverer blog has details of the latest patches.
Rod West

Why is my ipad doesnt have a software update?please help,i cannot find it.. :(

why is my ipad doesnt have a software update?please help,i cannot find it..

The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.

Please help me to find out how to turn off the shuffle feature on my touch i-pod, Please help me to find out how to turn off the shuffle feature on my touch i-pod

Please help me to find out how to turn off the shuffle feature on my I-pod nano ... THANK YOU!!!!!! :)

Just figured it out :) Thanks though!!!

Can anybody please help me to find out the link where small co.

can anybody please help me to find out the link where small companies implementing saps.

Hi,
SAP is providing a solution to Small Scale Industries with SMB (Small and Midsize Business) Product for various industries. It's a Pre configured SAP Solution pertaining to a specific industry(like Pharma, Oil..etc) with which the implementation as well as the cost will also decreases.
Regards,
Jayaram...

Please help me to find out windows 7 home premium product key

Please help me to find out windows 7 home premium product key .My windows product ID is 00359-OEM-XXXXXX-XXXX
my pc have sticker but is damage ...only can see last is -RXWJ8-XXXXX

Hi,
Please don't disclose any product key information in here. This is public and open place to discuss Windows 7 problem. It's dangerous for any personal information.
Also, since the Windows is brought with OEM computer, maybe you could try to contact the manufacturer for help.
Karen Hu
TechNet Community Support

HT1937 please help me to find my lost iphone 5 .its switched off

Similar Messages

Maybe you are looking for