HT1937 Testing of LTE network with USIM, but not able to scan LTE network in manual selection?
Recently i am testing LTE network and intially though of having problems with USIM card. But it turns out that the phone is the problem.
I am testing with 4 type of handsets, I-phone5, Galaxy S4, Blackberry Z10 and Huawei 4G modem. All of them supporting the LTE and frequency that we are using. Problem is that none of the phones , will switch to LTE network scan when this USIM is inserted. They show only 2G and 3G network.Frequency is there, because i have tested with spectrum analyzer, and the E-NodeB is behaving correctly.
Meanwhile when testing with one U-SIM from AT&T, all the handset can tune them self and show 4G signal on Manual Selectio mode.
I am thinking on 2 possible scenarios:
1. All these branded phones have some white list, of MCC MNC list of the carriers that support LTE. ( but then how is supposed to do some operator testing in advance, before publishing it to GSMA )
2. The U-SIM recently produced might have something wrong in the electrical profile, that is not giving any indication to the phone about the present of USIM , instead of SIM, thus stating the check for 4G frequency as well.
Anybody experiencing the same??
First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay.
Similar Messages
-
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
Hello Im Having A Problem With Itunes im Not Able to reinstall itunes at all nor quicktime and bonjour service is not working either .i have tried tweaking my firewall but to no avail hoping someone can help me cos apple sure cant typical like politicians they sway away from the problem and blame someone else ?.
Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions? I am fimilar with changing the setting for all network partitions(defaults write com.apple.desktopservices DSDontWriteNetworkStores true), but that is undesirable when I connect my laptop to my home network. A preferable solution would be where I could control the writing of these files based on disk format (NTFS vs HFS+).
Go to MacUpdate or CNET Downloads and search for ds_store. There are numerous utilities for preventing them from being transferred to Windows systems.
-
I have to open website which opens only with google but not from safari. how can i get such google?
i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
Why Doesn't Project TV woek with IE but not Firefox? I tried the "Proxy" suggestion with no results.
Project TV works fine with IE. It used to work with Firefox but no longer. I tried the "Proxy" suggestion and clearing History with no results?
scher2000
First and foremost, thank you for your help and concern. It is appreciated.
Project TV works just fine with IE but will not work at all with Firefox although it did work a few days ago. I have tried::
Clearing History, as suggested,
Changing the "Proxy: settings, as suggested
This has been all to no avail.
Link:
http://www.free-tv-video-online.me/
Also, my WOW Speed test works fine with IE but not with Firefox; I just ried it on both.
Link:
http://speed.nap.wideopenwest.com/
I prefer Firefox but it appears to be giving me problems resulting in having to use IE.
Again, Thank you.: -
I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
RajeshSee this discussion...
https://discussions.apple.com/message/23731048#23731048 -
Photos uploaded through icloud control panel are only synced with iphone but not with ipad
Photos which are uploaded through icloud control panel are only synced with iPhone but not with iPad. Photos taken with iPhone or iPad are synced with all devices. So, why I do not get the uploaded photos from my pc to iPad? I alredy disabled photo stream on all devices - same failure
If only one device is not getting updated data, you need to troubleshoot that device and not photostream itself.
Verify that ipad is connected to wifi, charged over 20 percent, camera app is closed and take a photo of the screen (or anything else, but then close that camera app).
Open photostream folder on that ipad and see if picture shows up. If you network is good, should not take long.
Don't forget that while your phone can use wifi and cellular (even it suppose to use wifi for photostream, cellular networks got much better since original photostream was implemented) - you ipad is probably wifi only.
If picture shows up - you ipad and photostream have no problems and you can go to other devices one by one. -
HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!
I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?
From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day! -
Move graphics with text--but not inline--in PM...??
Hello, is there a way in PageMaker to move graphics with text but not inline? I ask because right now I see two options for graphics:
--inline, so you cannot place the graphic exactly where you want AND the text only flows way above or below--but not next to--the graphic
or
--independent so you can place the graphic exactly where you want and the text DOES flow right next to the graphic, but then the graphic doesn't move with the text
I'd like to be able to place graphics exactly where I want AND have them move with the text, like the "Move object with text" option in Word.
thank you!
Lwell it has been a while since i used PageMaker so i didn't realize it was "dead."
though i'm not surprised and am kind of glad. i was hired into a new job recently
to work on a department newsletter, and i'm trying to find a good authoring program
within our budget. right now the newsletter is in Word but we've had a lot of problems
with Word so i'm seeking an alternate solution. i'd like Frame but again there isn't
enough money in the budget. i need a good option that is $500 or less...i'm trying Publisher
now too but not enough functionality... -
IO assigned with Asset,but not coming at the time of PO creation
Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1 Depreciation - IFRS (INR) 1 0L
15 Income Tax Act 0
20 Depreciation - Indian GAAP (INR) 3 1L
30 Depreciation - IFRS (USD) 0
31 Depreciation - Indian GAAP (USD) 0
In ACSET-Account assignment:
for dep area-20
CAUFN Internal Order * Generic Trans. Type 02 Depreciation Run
KOSTL Cost Center * Generic Trans. Type 02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regardsHey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
Message no. AA565
Diagnosis
The asset to be posted does not manage parallel depreciation area 31, or
transaction type that you are using is limited to certain depreciation
areas, and does not contain depreciation area 31. This is incorrect.
System Response
Posting is rejected.
Procedure
Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards -
I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.
I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry -
Why does the FP 10 work with firefox but not with IE8
I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!
Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb -
Error windows keep popping up on our laptop (Windows) it has to do with MobileMe. Trying to uninstall but not able to. Now can't even open itunes???
MobileMe should be uninstalled. See note 2 of Troubleshooting issues with iTunes for Windows updates.
tt2 -
We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.
Maybe you are looking for
-
E-mail won't fit the screen, anyone help?
Hey all- I just "upgraded" (sorry, frustrated with this issue) my Curve to the 9350 and for every e-mail I receive I have to scroll left and right to be able to view the whole e-mail or use the zoom feature on every e-mail to make it fit the screen.
-
Searching for Nonprinting Objects
Is it possible to do a search for objects with an attribute set to Nonprinting? I have this odd problem: I work on a magazine, and we insert a little custom endmark image at the end of each story. For some reason, whenever anyone edits that story i
-
Is it possible to do a slideshow on a tv with the nano and if so how.
-
How does iOS4 determine the time?
I've seen several topics but no resolution. What I thought initially was a Telus (Canada) thing, I've instead come to realize it must be a iPhone or iOS4 thing ... That is, my new iPhone 4 was born 45 seconds ahead of accurate time, and it has since
-
How do I map a url to an ip address? So that it is available on the internet? Thanks, Sonia