HT1937 What do I need to do if the antenna in my phone is not working?

My iphone4 has recently been through a lot. I had to replace my screen not too long ago and I have been having problems with it for a few weeks now. But nothing as bad as my antenna not working. I have spent over $90 trying to get my phone unlocked because I thought it locked up (carrier lock). Well now that the phone is unlocked and I have a new SIM card the phone is still showing up searching/no service, but my service is fine in any other phone (including other iphones). I need help finding out what is wrong and how I can fix it.

The iPhone 4 antenna is on the speaker assembly of lower iPhone. Make sure that the antenna wire cap connector is perfectly pressed down and attached to its connector on the logic board. It can hover over and not be in the correct position, check it. While there, check and make sure the 4 silver metal legs of the antenna assembly are seated down properly. They slide below the midframe metal plate, and use spring action to contact the plate properly. Make sure that those legs are not bent or missing, one good one in proper position should give you reception. Also make sure the right lower screw which goes through the antenna is in place, not sure if this is important, but these are all the components of the antenna. A very important component of the "reception circuitry" is a small blue colored inductor on the logic board near where the antenna wire connects. Search on Web for blue inductor iPhone 4, if this is missing it can easily be bridged to regain service.

Similar Messages

Maybe you are looking for

  • Can h:dataTable be used for editable tables?

    I am trying to use a dataTable to manage an editable list of named "parts". I have declared a request-scope managed bean called "myForm" in faces-config.xml, and my dataTable declaration looks as follows: <h:dataTable value="#{myForm.parts}" var="par

  • I cant update my flash player!!! ...stop at 33%

    1st I try to clear the cache but still retriving something then "try to reconnect" and it will always stop to 33% after that lost connection. 2nd i uninstall the program and clear the remaining files in the system 32 and install "again" the flash but

  • Vendor numbering sequence by vendor type

    Dear Valued Consultant, Specify a range of automatic or manual vendor numbering sequence by vendor type . Thanks

  • CAN message query and CAN database creation

    I have a device under test (DUT) that uses CAN and I'm trying to communicate with it using a USB-8473 and MAX.  I have almost no information about the DUT's CAN interface spec.  So far I've been only able to figure out the baud rate for the CAN chann

  • All devices working with AEBS except one

    So I have a network with an Airport Extreme Base Station. Several devices use the network without any problems, including: MacBook Pro (older Core Duo model) - running OS 10.5.8 Powerbook G4 (still kicking) - running OS 10.5.8 Mac Mini (new, Core 2 D