HT1947 After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

Hey gwscrt,
Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I would read the document in full, but here are the applicable steps for you:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Have a good one,
David

Similar Messages

  • When trying to download ipodreset utility for windows i get a message that says the installer is intended for 32-bit version for windows. what can i do next?

    when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?

    I assume you have tried everything here?
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    It doesn't mention 1442, but the same troubleshooting applies.
    It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
    Lastly, try restoring the iPod on another PC or Mac running iTunes.
    If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
    B-rock

  • Photoshop Elements 10 will not open.  I get Error message that says "Runtime Error!" and closes.  What do I do?

    Help.  Photoshop Elements 10 will not open.  I get Error message that says "Runtime Error!" and closes. What do I do?  What does it mean?  I bought Elements 10 at a retail store.  It did work for a while.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Trying to download iTunes on my husband's windows vista laptop and we keep getting error messages that say error z, apple application support was not found, windows error 2. Tried 2 different browsers and it still would not work. Can you help? Thank you.

    Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • TS1410 MY LAP TOP DOES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO THE IPOD ITSELF HAS FROZEN AND CAN NOT BE TURNED OFF OR RE-SET BUY HOLDING THE MIDDLE BUTTON.

    MY LAPTOP DIES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO AFTER THE IPOD HAS BEEN CONNECTED TO THE COMPUTER THE IPOD WILL FREEZE. I AM ONLY ABLE TO USE IT AFTER THE BATTERY HAS RUN OUT. WHAT COULD BE CAUSING THESE PROBLEMS AND HOW DO I RESTORE MY IPOD!!!!!

    Hey gwscrt,
    Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    I would read the document in full, but here are the applicable steps for you:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Have a good one,
    David

  • Can't install, get error message that says "The website declined to show this page"

    I've been using Firefox for years now, but recently I had some problems with my computer and had to re-install Windows. I am now running Windows 8.1. I can't install Firefox now. It's very strange. When I attempt to install, I get an error message that says, "The website declined to show this webpage". It says the most likely cause is that the website requires you to log in. I have never experienced this issue before and like I said, I've been using Firefox for years. My anti-virus software found that the installation is accessing a web resource called DynamicOfferScreen, so I think the installation is corrupt. Can someone send me a link to download a clean installation?

    You might have loaded an unofficial bundle advertised as a Firefox download...
    Please start with the Windows Control Panel, Uninstall a Program. (Use the charms bar search box if necessary to find it.) Click the "Installed on" column heading to group by date and reveal what bundled items may have snuck in. Remove everything you do not know to be legit and valuable.
    Next, in Firefox, review your extension and disable/remove anything unrecognized or questionable. if in doubt, disable. You can do that on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions.
    Finally, after clearing those out, mop up with some of the scanning/cleaning programs listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
    Back to normal?

  • Trying to purchase lion get an error message that says i need a duel core processor, i have one, now what?

    trying to purchase lion. get an error msg that says i must have a duel core processor to buy.I have a 2.16 GHz Intel Core Due

    A Core Duo is not a dual core Processor. What you need is a Core 2 Duo.
    Regards
    TD

  • TS1398 I cannot activate my iMessage on my ipad. I get a message that says "Could not sign in. Please check your network connections and try again." But my internet and browsing works great.  I don't undersand. Any ideas of what to try?

    I am trying to activate iMessage. I receive a message that says "Could not sign in. Please check your network connection and try again." I connection is strong. I can browse the internet but cannot connect to iMessages. I don't understand. Any ideas.

    Turn iMessage off and then on again, wait a few minutes.
    Turn Airplane mode on and then off again, turn iMessage off and then on again, wait a few minutes.
    Make sure your iPad is on Wi-Fi, reboot your iPad, turn iMessage off and then on again, wait a few minutes.
    Wait and try again later -- Apple's servers can get overwhelmed or experience outages just like anyone else's.

  • I installed 3.6.12 and now get error message that says - Error: Platform version 1.9.2.12 is not compatible with miniversion = 1.9.2.10 maxversion = 1.9.2.19 and it won't launch unless outside of sandbox. I cannot navigate to yahoo. Please help.

    I down loaded latest version and get error message when I launch it. Error message is entitled XUL Runner and says - Error: Platform version 1.9.2.12 is not compatible with miniversion >= 1.9.2.10 maxversion <= 1.9.2.19 and it won't launch. I can launch if I use Run Outside of Sandbox option, but I cannot navigate my home page on yahoo. What happened? Please send fix. Thanks, [email protected]

    Do a clean (re)install:
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • After upgrading to OSX Mountain Lion, I cannot upgrade iMovie. I get a message that says that I have updates available for other accounts. Any suggestions?

    After upgrading to Mountain Lion 10.8.2, I'm not able to update iMovie. I think this app came with my MacBook Pro, late 2011. Any help is greatly appreciated!

    First, see > http://support.apple.com/kb/TS4236?viewlocale=en_US&locale=en_US
    If it doesn't work, open App Store > Featured > Account > Show hidden purchases, and show iMovie to be able to update this application. If nothing work, contact with App Store support > http://www.apple.com/support/mac/app-store/contact

  • When downloading Itunes I get error messages that say Error 2 and not found.

    Itunes goes through the download process and it will not open. I get the error messages listed above. Have been on the phone with Apple for hours. Getting frustrated cause I want to use my want to use my new IPOd. Any proven suggestions would be appreciated.

    Are you trying to download some sort of iTunes program for installation on your Windows computer?
    And you are trying to use Firefox to download that program?

  • Get error message that says, "ITunes not properly installed.  If you wish to import or burn CD's, you must reinstall Itunes."

    Hello:
    I have installed Itunes on my new Windows 7 based computer (64 bit) and get the following error message everytime the program opens, "ITunes not properly installed.  If you wish to import or burn CD's, you must reinstall ITunes."  So, I have removed ITunes, Quick Time and Apple associated software, twice, from my computer and reinstalled the latest version (10.4.1) but get no fix to the problem.  ITunes will import CD's but will not burn them with this error in place.  Anybody know how to fix this problem?

    if you have 64bit os this is problem:
    Any 64-bit version of Windows is not supported so you should expect certain things not to work. From Apple's iTunes page the Windows requirements are:
    32-bit editions of Windows XP or Vista
    Windows XP Service Pack 2 or later required for Apple TV or iPhone
    500 MHz Pentium class processor or better
    QuickTime 7.1.6 or later (included)
    256MB RAM
    Supported CD-R or DVD-R drive to burn CDs
    Broadband Internet connection (DSL/Cable/LAN) for buying and streaming music

  • HT203167 I am trying to download a digital copy to i-tunes and keep getting an error message that says the disk I am attempting to use is full.  What does that mean

    I am trying to download a digital copy to i-tunes, but keep getting an error message stating that the disc I am attempting to use is full.  What does that mean???

    Hi, reagans3.
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues with iMessage.  I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    Jason H.

  • Trying to update my 3GS to ios 5 - getting error message that says I will lose all my media because there is not enough room to back it up on my computer.  Any ideas?

    Does anyone know how to update to ios5 when getting this error message?

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

Maybe you are looking for

  • ADF BC - How to get validation picked up from the database.

    Is there a way the ADF BC can be created so it contains the check constraints from the database? I assume if it did, it would pre-fill the "validation" branch in the Entity Object Editor.

  • Lightroom colours differ from Photoshop Bridge

    RAW images in Lightroom 2.0 are discoloured and totally different from Photoshop Bridge4 display. Please advise

  • Live Connect Sign/Consent In popup not closing

    I have a web app eg www.webapp.com that uses Win Live javascript to sign in users, following the example at https://msdn.microsoft.com/en-us/library/hh550845.aspx   It works from the desktop and mobile devices as long as I use the browser to navigate

  • Parsley handling 2 service calls

    Hi, I am fairly new to Parsley. We have a Flex app which needs tons of data to display (gets many different resultsets of various kinds), so up until new were making 1 service call via REST-to-SOAP bridge, but it is often timeout (> 1 min), so we dec

  • Select first node in train depending on Radio Buttons

    I followed the document http://www.oracle.com/technetwork/developer-tools/adf/learnmore/82-programmatically-navigate-trains-396873.pdf to programmatically navigate ADF train now i want to select the first node in the train depending on the selected R