HT1947 How do you rate tunes using version 3 of the remote?

I used to rate my tunes using the previous version of the app, but can't find it on version 3. Does anyone know where it is?

Zoom Area is under the big Objects button.

Similar Messages

How do you update I pad version 1 to the newest os

I have the original OS version on my I Pad 4.3. How do you update it to the newest version?

You connect your iPad to your computer via USB and open iTunes and once recognized, iTunes should let you know there is a new OS and ask if you want to install it. There is also the option to choose to update the software.

How do I start Freevo using a button on the remote?

Hi!
I've set up freevo on my computer and now I'd like to be able to launch freevo using my remote (I don't like to move out of my couch ).
I've google'd and wiki'd a lot, but I'm having trouble doing this. I came over this entry in the OS dir mail archive:
Subject: Re: Shutdown freevo with a lirc command
stephan wezel wrote:
Hi,
Hi.
can I shutdown freevo through one lirc event/command without selecting the
shutdown menu point ?
Yes!
and if how ??
Well, I am not sure if you can bind a Freevo event to shutdown but the way I do it is with irexec. Irexec is a command that comes with lirc that you can
have it run a command per button press based on configuration. In my /etc/init.d/freevo system start/stop script I have:
case "$1" in
start)
if [ "`ps -ef | grep irexec | grep -v grep`" = '' ]
then
/usr/local/bin/irexec -d /etc/freevo/irexec.conf
fi
Ok, so that't not the cleanest but upon startup it looks for a running irexec process and runs it if none is found. In /etc/freevo/irexec.conf I have:
begin
remote = hauppauge_pvr
button = Power
prog = irexec
repeat = 0
config = /etc/freevo/onoff_switch
end
So, every time that I press the power button the onoff_switch gets executed. That is a very messy shell script that decides if Freevo is running or not then starts or stops it.
The contents of that file are:
#!/bin/bash
TEST=`ps -ef | grep freevo | grep -v grep | grep -v irexec | grep -v onoff | grep -v "less " | grep -v "vi " | grep -v "cron" | grep -v "tail " | grep -v recordserver
| grep -v bitch | grep -v webserver | grep -v tv_grab`
if [ "$TEST" = "" ]
then
echo Freevo is off, starting.
/etc/init.d/freevo start
else
echo Freevo is on, stopping.
/opt/freevo/freevo stop
fi
Ok, the TEST line is horrible I know. I made that before adding pid file support to Freevo and need to fix it. Actually, perhaps I will add a 'switch' option to
my /etc/init.d/freevo and commit it to CVS.
Would others find this useful? I can use the power button on my remote to startup and shutdown Freevo with no issues.
-Rob
Since I'm noobish still I really don't know what to do with this script. Am I supposed to make a sh-file with the first part of the code and then autostart the file on startup?

Put a single frame sequence structure around your stop button and then wire from the error cluster going into the error handler to the edge of the sequence structure. Now your code will stop at the end of the current iteration. To see why this works, watch you code execute with execution highlighting turned on and review the section of the manual talking about "Dataflow".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

When I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this

when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar. How do i get rid of this?

Carolyn Samit has answered this question before. I did it with this info. Thank you Carolyn for your awesome help.

I am unable to connect to the internet, there is a pop-up that says "We're sorry, but the Safari browse version you are currently using dos no support the community toolbar". My computer does say that it is connected to the internet until I open Safari.

I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!

Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

Version 10 doesn't work with a web site I use constantly. How can I download a lower version and have the app appear on my phone?

Have been using a lower version of firefox on my samsung galaxy phone to access [email protected] for quite some time. Since the upgrade to 10.0, I receive a server error everytime I try to access. Want to download a lower version, but app doesn't appear on my phone. How can I download a lower version and get the app to show up on my phone?

Mandel is referring to what is called a "User Agent Faker' which tricks the website into thinking it is a different browser or version than it actually is. I sometimes would use this on my iPhone when I wanted to visit the full website of a site I was attempting to go to & it would only take me to the mobile version or state it was only compatible with say Internet Explorer, simply turn it on & select the browser and details you want it to report and it will spoof that browser & you'll be on your way.

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
This is only 8.3% of the available disk drive space!
http://digital.ni.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
http://upload.wikimedia.org/wikipedia/commons/9/90/Hard_drive_capacity_over_time.svg
Drives as large as 126GB or more have been around since about mid 2002. That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB! Please NI. Do something.
We deserve fixes to the old versions of LabVIEW RT. How about updates to LabVIEW RT. Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions.
Kevin.
Message Edited by kmcdevitt on 05-29-2009 03:39 PM
Solved!
Go to Solution.

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank you

See this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

How do you download 64 bit versions of PS Elements & Premiere Elements Version 10?

How do you download 64 bit versions of PS Elements & Premiere Elements Version 10?

yashpal wrote:
Windows 8.
Windows 8 32 bit or 64 bit?
Photoshop Elements 10 is only available as 32 bit. There is no 64 bit version. However the 32 bit version will install and run OK on a 64 bit operating system.
If you're running 64 bit Windows then Premiere Elements 64 bit will install automatically. 32 bit Premiere Elements 10 will not install on 64 bit Windows 7 or 8.
http://helpx.adobe.com/premiere-elements/kb/cannot-install-premiere-elements-10.html

How do you whiten teeth using iPhoto tools?

How do you whiten teeth using iPhoto tools?

You need more powerful editing software for that - iPhoto is good but basic
PhotoShop Elements is a good value - Gimp is open source and free - there are many others
LN

How do you download InDesign using the Adobe Download Manager?

How do you download InDesign using the Adobe Download Manager?

With the Adobe Download Assistant installed you should be able to initiate the download at http://www.adobe.com/cfusion/tdrc/index.cfm?product=indesign. If this is not working for you then please try an alternate web browser.

How do you copy tunes from an ipod nano to an ipod shuffle? Thanks

Hi. How do you copy tunes from an ipod nano to an ipod shuffle? Thanks

Use the Transfer Purchases command in iTunes and then sync the iPod shuffle.
(58700)

How would you rate the iTouch as a gaming device?

On a scale of 1-10, how would you rate the iTouch as a gaming device?

7, if the game is well designed for iPod touch is very good!
let the last three pionts be left to the iPad

HT1947 How do you rate tunes using version 3 of the remote?

Similar Messages

Maybe you are looking for