HT1947 Radio Streaming Error

Why does the "Remote" application require radio streaming? This creates a problem when there is network block such as at a school district. If I don't override the district block, I get a "Radio Streaming Error" message.

I am still getting this message. I use my iphone as a remote for my itunes and that also seems to trigger the message. I just updated my macbook to the newest itunes, as I had moved my other devices to the newest operating system and had been using my iphone as a remote for all music classes, then clunk, this message comes on and has to be deleted over and over. Make it stop!! We've never been able to access radio, as it's blocked by the Area 11. Any thoughts?

Similar Messages

Itunes 10.5 radio streaming error

All of the sudden iTunes keeps giving me the following error:
"An error occured while contacting the radio tuning service. Check you internet connection, or try again later."
This just started today and I'm not even trying to listen to internet radio. Nothing is wrong with my internet connection. Any ideas how I can get rid of this as it keeps popping up every time I select "OK" and it's very annyoying to say the least.
I even removed Radio from my sidebar in Preferences...to no avail. Any help would be appreciated.

I am still getting this message. I use my iphone as a remote for my itunes and that also seems to trigger the message. I just updated my macbook to the newest itunes, as I had moved my other devices to the newest operating system and had been using my iphone as a remote for all music classes, then clunk, this message comes on and has to be deleted over and over. Make it stop!! We've never been able to access radio, as it's blocked by the Area 11. Any thoughts?

Shutdown not working properly. APSCourier: : Stream error APSTCPStream

since a couple of weeks my imac won't shot down properly from time to time. in the log there are a lot of error messages of this kind: <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10060c290>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
sometimes the usb keyboard and the attached logtech mouse don't work anymore either. if i attach another keyboard to the back of the imac, it works. after a hard reset the mac keyboard and mouse work again.
the third problem is, that after such hard resets, my truecrypt partition won't mount propery anymore and i get the error "hdiutil: attach failed - no mountable file systems". then again after a reboot it works fine again.
i did a check with disk utitlity which didn't find any problems. i also repaired permissions. didn't help either.
i have no idea what the cause could be. bad hardware? bad filesystem? bad os? any ideas?
here's the end of the log file:
2010-10-30 13:55:37 Transmission[499] * __NSAutoreleaseNoPool(): Object 0x100500e00 of class NSCFNumber autoreleased with no pool in place - just leaking
2010-10-30 13:58:08 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:03:08 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:08:09 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100636280>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:13:09 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:18:09 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10012a000>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:20:10 [0x0-0x29029].com.adiumX.adiumX[331] SocketRead err = -9806
2010-10-30 14:20:41 [0x0-0x29029].com.adiumX.adiumX[331] SocketRead err = -9806
2010-10-30 14:23:09 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10060c290>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:28:09 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100609600>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:32:52 Transmission[499] * __NSAutoreleaseNoPool(): Object 0x100500e00 of class NSCFNumber autoreleased with no pool in place - just leaking
2010-10-30 14:33:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10060c290>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:38:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:43:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100609600>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:44:18 Transmission[499] * __NSAutoreleaseNoPool(): Object 0x100500e00 of class NSCFNumber autoreleased with no pool in place - just leaking
2010-10-30 14:48:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100636280>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:53:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 14:54:00 kernel PreferenceSyncCl (map: 0x8ef9ae4) triggered DYLD shared region unnest for map: 0x8ef9ae4, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 14:54:02 kernel gconsync (map: 0xa334668) triggered DYLD shared region unnest for map: 0xa334668, region 0x7fff82e00000->0x7fff83000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 14:54:02 kernel SubmitDiagInfo (map: 0x8ef9ae4) triggered DYLD shared region unnest for map: 0x8ef9ae4, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 14:54:03 kernel SyncServer (map: 0xa7b7000) triggered DYLD shared region unnest for map: 0xa7b7000, region 0x7fff82e00000->0x7fff83000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 14:54:03 kernel AddressBookSync (map: 0x8ef9cd0) triggered DYLD shared region unnest for map: 0x8ef9cd0, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 14:54:10 kernel iCal Helper (map: 0xa334668) triggered DYLD shared region unnest for map: 0xa334668, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 14:58:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 15:03:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10012b990>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 15:08:10 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100608620>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 15:10:40 kernel quicklookd (map: 0xa7b7000) triggered DYLD shared region unnest for map: 0xa7b7000, region 0x7fff82e00000->0x7fff83000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:11:33 com.apple.launchd.peruser.501[184] (com.apple.Finder[190]) Exited: Terminated
2010-10-30 15:11:34 kernel Finder (map: 0xa334148) triggered DYLD shared region unnest for map: 0xa334148, region 0x7fff82e00000->0x7fff83000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:11:37 /System/Library/CoreServices/Dock.app/Contents/MacOS/Dock[188] spawnvialaunchd() failed, errno=2 label=com.apple.Finder flags=2
2010-10-30 15:11:37 kernel CoreServicesUIAg (map: 0xa334b88) triggered DYLD shared region unnest for map: 0xa334b88, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:11:45 kernel System Events (map: 0x8ef9cd0) triggered DYLD shared region unnest for map: 0x8ef9cd0, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:13:11 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10010a5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 15:13:43 [0x0-0x2c02c].org.participatoryculture.Miro[348] INFO:root:Shutting down downloaders...
2010-10-30 15:13:43 [0x0-0x2c02c].org.participatoryculture.Miro[348] INFO:root:Shutting down torrent session...
2010-10-30 15:13:43 [0x0-0x2c02c].org.participatoryculture.Miro[348] INFO:root:Shutdown complete
2010-10-30 15:13:59 kernel VDCAssistant (map: 0xa334cd0) triggered DYLD shared region unnest for map: 0xa334cd0, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:13:59 GoogleTalkPlugin[1060] Opening shmem segment com.allocinit.CTCtrl2
2010-10-30 15:13:59 GoogleTalkPlugin[1060] Opening shmem segment com.allocinit.CTImg2.0
2010-10-30 15:13:59 GoogleTalkPlugin[1060] Opening shmem segment com.allocinit.CTImg2.1
2010-10-30 15:15:57 kernel Automator Launch (map: 0xa334e18) triggered DYLD shared region unnest for map: 0xa334e18, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:16:04 sudo[1068] flaimo : 3 incorrect password attempts ; TTY=unknown ; PWD=/Users/flaimo ; USER=root ; COMMAND=/Applications/TrueCrypt.app/Contents/MacOS/Truecrypt --core-service
2010-10-30 15:16:09 sudo[1069] flaimo : TTY=unknown ; PWD=/Users/flaimo ; USER=root ; COMMAND=/Applications/TrueCrypt.app/Contents/MacOS/Truecrypt --core-service
2010-10-30 15:18:11 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x10013b5d0>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 15:21:09 kernel ScreenSaverEngin (map: 0xa7b7148) triggered DYLD shared region unnest for map: 0xa7b7148, region 0x7fff82e00000->0x7fff83000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] CElectricSheep()
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] CElectricSheep_Mac()
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] self - 00054760
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] Startup()
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] SetInstallation: /Library/Screen Savers/Electric Sheep.saver/Contents/Resources/Scripts
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] SetInstallation: /Library/Screen Savers/Electric Sheep.saver/Contents/Resources/Scripts
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] CElectricSheep::Shutdown()
2010-10-30 15:21:27 [0x0-0x51051].com.apple.ScreenSaver.Engine[1073] Trying to access shutdown singleton CReusableAlignedBuffers
2010-10-30 15:21:43 kernel pbs (map: 0xa3347b0) triggered DYLD shared region unnest for map: 0xa3347b0, region 0x7fff82e00000->0x7fff83000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:22:01 kernel Terminal (map: 0x8ef93d8) triggered DYLD shared region unnest for map: 0x8ef93d8, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:22:02 login[1082] USER_PROCESS: 1082 ttys000
2010-10-30 15:22:03 kernel login (map: 0x941fa40) triggered DYLD shared region unnest for map: 0x941fa40, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:22:16 su[1087] BAD SU flaimo to shutdown on /dev/ttys000
2010-10-30 15:22:32 sudo[1088] flaimo : TTY=ttys000 ; PWD=/Users/flaimo ; USER=root ; COMMAND=/sbin/shutdown
2010-10-30 15:22:38 sudo[1090] flaimo : TTY=ttys000 ; PWD=/Users/flaimo ; USER=root ; COMMAND=/sbin/shutdown -u
2010-10-30 15:22:45 sudo[1091] flaimo : TTY=ttys000 ; PWD=/Users/flaimo ; USER=root ; COMMAND=/sbin/shutdown u
2010-10-30 15:22:53 sudo[1092] flaimo : TTY=ttys000 ; PWD=/Users/flaimo ; USER=root ; COMMAND=/sbin/shutdown -r
2010-10-30 15:23:11 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100608620>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
2010-10-30 15:23:49 login[1082] DEAD_PROCESS: 1082 ttys000
2010-10-30 15:23:51 login[1105] USER_PROCESS: 1105 ttys000
2010-10-30 15:23:51 kernel login (map: 0x8ef9290) triggered DYLD shared region unnest for map: 0x8ef9290, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:23:56 sudo[1109] flaimo : TTY=ttys000 ; PWD=/Users/flaimo ; USER=root ; COMMAND=/sbin/shutdown -r now
2010-10-30 15:25:11 kernel System Profiler (map: 0xa334e18) triggered DYLD shared region unnest for map: 0xa334e18, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:25:31 kernel Console (map: 0x8ef9ae4) triggered DYLD shared region unnest for map: 0x8ef9ae4, region 0x7fff84c00000->0x7fff84e00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2010-10-30 15:28:11 apsd-ft[233] <APSCourier: 0x10011deb0>: Stream error occurred for <APSTCPStream: 0x100638e80>: Error Domain=NSPOSIXErrorDomain Code=61 UserInfo=0x10014a970 "The operation couldn’t be completed. Connection refused"
----------------------------

I'm getting the same issue; my system wakes up from sleep about half an hour after I put it to sleep. The display never turns on by itself though—just the system. This has happened since the upgrade to 10.6.5. I'm running build 10H574, which I believe is the release version. The issue appears to have existed in pre-release versions, and does not seem to have been fixed in the release.
Can anyone shed some light on this issue?

Is there a way of.m3u internet radio streaming on my iPhone?

is there a way of.m3u internet radio streaming on my iPhone? I was looking for a way of downloading .m3u files and putting them on my iPhone and was wondering if Music would do that as I cant get it to work. Or can anyone recommend another solutio

Copied from your initial post:
" I was looking for a way of downloading .m3u files and putting them on my iPhone"
Hence my reply.
Look in the app store for a streaming app, there are many.

Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?

Is it possible to create a link that I can place on a website to an internet radio stream on iTunes?

Yes, but it WON'T play through the browser. It'll require any visitor who clicks it to have iTunes installed, and it'll open iTunes as soon as they do.

Network Stream Error -314340 due to buffer size on the writer endpoint

Hello everyone,
I just wanted to share a somewhat odd experience we had with the network stream VIs. We found this problem in LV2014 but aren't aware if it is new or not. I searched for a while on the network stream endpoint creation error -314340 and couldn't come up with any useful links to our problem. The good news is that we have fixed our problem but I wanted to explain it a little more in case anyone else has a similar problem.
The specific network stream error -314340 should seemingly occur if you are attempting to connect to a network stream endpoint that is already connected to another endpoint or in which the URL points to a different endpoint than the one trying to connect.
We ran into this issue on attempting to connect to a remote PXI chassis (PXIe-8135) running LabVIEW real-time from an HMI machine, both of which have three NICs and access different networks. We have a class that wraps the network stream VIs and we have deployed this class across four machines (Windows and RT) to establish over 30 network streams between these machines. The class can distinguish between messaging streams that handle clusters of control and status information and also data streams that contain a cluster with a timestamp and 24 I16s. It was on the data network streams that we ran into the issue.
The symptoms of the problem were that we if would attempt to use the HMI computer with a reader endpoint specifying the URL of the writer endpoint on the real-time PXI, the reader endpoint would return with an error of -314340, indicating the writer endpoint was pointing to a third location. Leaving the URL blank on the writer endpoint blank and running in real-time interactive or startup VI made no difference. However, the writer endpoint would return without error and eventually catch a remote endpoint destroyed. To make things more interesting, if you specified the URL on the writer endpoint instead of the reader endpoint, the connection would be made as expected.
Ultimately through experimenting with it, we found that the buffer size of the create writer endpoint for the data stream was causing the problem and that we had fat fingered the constants for this buffer size. Also, pre-allocating or allocating the buffer on the fly made no difference. We imagine that it may be due to the fact we are using a complex data type with a cluster with an array inside of it and it can be difficult to allocate a buffer for this data type. We guess that the issue may be that by the reader endpoint establishing the connection to a writer with a large buffer size specified, the writer endpoint ultimately times out somewhere in the handshaking routine that is hidden below the surface.
I just wanted to post this so others would have a reference if they run into a similar situation and again for reference we found this in LV2014 but are not aware if it is a problem in earlier versions.
Thanks,
Curtiss

Hi Curtiss!
Thank you for your post! Would it be possible for you to add some steps that others can use to reproduce/resolve the issue?
Regards,
Kelly B.
Applications Engineering
National Instruments

B2B-51566 Description: Parse stream error with RosettaNet 1.1

Hi
Need help with the following error message
B2B-51566 Parse stream error
We have a trading partner set up to use RosettaNet 1.1 protocol and we are getting 51566 error. We are NOT experiencing this error with a trading partner who is in RosettaNet 2.0
we are currently patched up to 11.1.1.5
One thing I notice is when i go to the message and open the packed message i get this "Cannot display Packed Message in binary format."
Here is the payload
XMessage-ID: <[email protected]d.e2open.com>
MIME-Version: 1.0
Content-Type: multipart/related;
     boundary="----=_Part_176_29725195.1331307008851";
     type="Application/x-RosettaNet"
Content-Description: This is the RosettaNet Business Message
Content-ID: "-15059242:135f6ea5e3c:-62b9"
------=_Part_176_29725195.1331307008851
Content-Type: Application/xml; rnsubtype=preamble-header; name=Preamble
Content-Transfer-Encoding: binary
Content-Disposition: attachment; filename=Preamble
Content-ID: <[email protected]>
Content-Description: This is the Preamble Header part of the Business Message
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE Preamble SYSTEM "PreamblePartMessageGuideline.dtd">
<Preamble>
<DateTimeStamp>20120309T153008.852Z</DateTimeStamp>
<GlobalAdministeringAuthorityCode>RosettaNet</GlobalAdministeringAuthorityCode>
<GlobalUsageCode>Production</GlobalUsageCode>
<VersionIdentifier>1.1</VersionIdentifier>
</Preamble>
------=_Part_176_29725195.1331307008851
Content-Type: Application/xml; rnsubtype=service-header; name=ServiceHeader
Content-Transfer-Encoding: binary
Content-Disposition: attachment; filename=ServiceHeader
Content-ID: <[email protected]>
Content-Description: This is the Service Header part of the Business Message
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeaderPartMessageGuideline.dtd">
<ServiceHeader>
<ProcessControl>
<ProcessIdentity>
<description>
<FreeFormText>NotNull</FreeFormText>
</description>
<GlobalProcessCode>Request Purchase Order</GlobalProcessCode>
<GlobalProcessIndicatorCode>3A4</GlobalProcessIndicatorCode>
<initiatingPartner>
<GlobalBusinessIdentifier>007710825</GlobalBusinessIdentifier>
</initiatingPartner>
<InstanceIdentifier>PIPC0A85CB8135F814CB4200000EAFE56F0</InstanceIdentifier>
<VersionIdentifier>V02.00</VersionIdentifier>
</ProcessIdentity>
<ServiceRoute>
<fromService>
<BusinessServiceDescription>
<GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
</BusinessServiceDescription>
</fromService>
<toService>
<BusinessServiceDescription>
<GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode>
</BusinessServiceDescription>
</toService>
</ServiceRoute>
<TransactionControl>
<AttemptCount>1</AttemptCount>
<PartnerRoleRoute>
<fromRole>
<PartnerRoleDescription>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
</PartnerRoleDescription>
</fromRole>
<toRole>
<PartnerRoleDescription>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
</PartnerRoleDescription>
</toRole>
</PartnerRoleRoute>
<TransactionIdentity>
<GlobalTransactionCode>Request Purchase Order</GlobalTransactionCode>
<InstanceIdentifier>TIC0A85CB8135F814CB4200000EAFE5700</InstanceIdentifier>
</TransactionIdentity>
<SignalControl>
<inResponseTo>
<ActionIdentity>
<GlobalBusinessActionCode>Purchase Order Request Action</GlobalBusinessActionCode>
<InstanceIdentifier>C0A85CB8135F814C33C00000EAFE5670</InstanceIdentifier>
</ActionIdentity>
</inResponseTo>
<InstanceIdentifier>20120309T153008.882Z</InstanceIdentifier>
<PartnerRoute>
<fromPartner>
<PartnerDescription>
<BusinessDescription>
<GlobalBusinessIdentifier>364132837</GlobalBusinessIdentifier>
</BusinessDescription>
<GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
</PartnerDescription>
</fromPartner>
<toPartner>
<PartnerDescription>
<BusinessDescription>
<GlobalBusinessIdentifier>007710825</GlobalBusinessIdentifier>
</BusinessDescription>
<GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
</PartnerDescription>
</toPartner>
</PartnerRoute>
<SignalIdentity>
<GlobalBusinessSignalCode>Receipt Acknowledge</GlobalBusinessSignalCode>
<VersionIdentifier>1.1</VersionIdentifier>
</SignalIdentity>
</SignalControl>
</TransactionControl>
</ProcessControl>
</ServiceHeader>
------=_Part_176_29725195.1331307008851
Content-Type: Application/xml; rnsubtype=service-content;
     name=ReceiptAcknowledgement
Content-Transfer-Encoding: binary
Content-Disposition: attachment; filename=ReceiptAcknowledgement
Content-ID: <[email protected]>
Content-Description: This is the Service Content part of the Business Message
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ReceiptAcknowledgement SYSTEM "ReceiptAcknowledgementMessageGuideline.dtd">
<ReceiptAcknowledgement>
<fromRole>
<PartnerRoleDescription>
<ContactInformation>
<contactName>
<FreeFormText>E2open Support</FreeFormText>
</contactName>
<EmailAddress>[email protected]</EmailAddress>
<telephoneNumber>
<CommunicationsNumber>650-381-6000</CommunicationsNumber>
</telephoneNumber>
</ContactInformation>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
<PartnerDescription>
<BusinessDescription>
<GlobalBusinessIdentifier>364132837</GlobalBusinessIdentifier>
<GlobalSupplyChainCode>Information Technology</GlobalSupplyChainCode>
</BusinessDescription>
<GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
</PartnerDescription>
</PartnerRoleDescription>
</fromRole>
<receivedDocumentDateTime>
<DateTimeStamp>20120309T153008.907Z</DateTimeStamp>
</receivedDocumentDateTime>
<receivedDocumentIdentifier>
<ProprietaryDocumentIdentifier>337719</ProprietaryDocumentIdentifier>
</receivedDocumentIdentifier>
<thisMessageDateTime>
<DateTimeStamp>20120309T153008.904Z</DateTimeStamp>
</thisMessageDateTime>
<thisMessageIdentifier>
<ProprietaryMessageIdentifier>20120309T153008.905Z</ProprietaryMessageIdentifier>
</thisMessageIdentifier>
<toRole>
<PartnerRoleDescription>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
<PartnerDescription>
<BusinessDescription>
<GlobalBusinessIdentifier>007710825</GlobalBusinessIdentifier>
<GlobalSupplyChainCode>Information Technology</GlobalSupplyChainCode>
</BusinessDescription>
<GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
</PartnerDescription>
</PartnerRoleDescription>
</toRole>
</ReceiptAcknowledgement>
------=_Part_176_29725195.1331307008851--

I do have SR but hoping i can get quicker answer hereYou may always escalate the SR if you are not getting response timely. Anyways, give the reference of this thread in the SR and ask service engineer to file a bug.
I will email you the wire messageI saw the wire message you mailed across. There are some junk characters in the starting of the payload and that's why parsing is failing. Most probably it is a BOM (Byte Order Mark). Ask your TP to send messages in UTF-8 encoding without BOM or any other junk character in the starting of the message. You may open the wire message payload you mailed across in notepad or textpad and you will able to see those junk characters in the starting of the payload.
Regards,
Anuj

Meta data (song information) not updating in mini player for radio stream

I notice in the mini player view, the meta data does not update for radio streams. This is a big deal for me because I listen to radio stations all the time, and I don't want to have to switch between the mini player and full player to see the song information. This wasn't an issue in iTunes 10 (and previous versions as I recall), where I could just click to toggle between the name of the station and the meta information.

I understand your concerns, but regarding the headphone jack, this is standard procedure. While you may have checked these things, and know more about the player, a lot of people will not check the basic things before contacting support. The Advisors have to check these things with you first to make sure they've been checked.
As far as transferring data goes, it is true that unfortunately we cannot transfer data over for you or make a back-up. Doing this for all the returns for different players would require a lot of resources, time and money, making the RMA process a lot longer for everyone. In some cases, it's even necessary to replace the harddri've or the whole player.
Cat

Soap Attachment Stream Error

11:56:37 F01F Soap Attachment Stream Error: [8911], File Size = 1120068 Written Size=131072
11:56:37 F01F Soap Attachment Stream Error: [8911], File Size = 1120068 Written Size=131072
11:56:37 F01F Error streaming an attachment [8911]
11:56:37 F277 Soap Attachment Stream Error: [8911], File Size = 673015 Written Size=131072
11:56:37 F277 Soap Attachment Stream Error: [8911], File Size = 673015 Written Size=131072
11:56:37 F277 Error streaming an attachment [8911]
What are these?

Originally Posted by swishewk
11:56:37 F01F Soap Attachment Stream Error: [8911], File Size = 1120068 Written Size=131072
11:56:37 F01F Soap Attachment Stream Error: [8911], File Size = 1120068 Written Size=131072
11:56:37 F01F Error streaming an attachment [8911]
11:56:37 F277 Soap Attachment Stream Error: [8911], File Size = 673015 Written Size=131072
11:56:37 F277 Soap Attachment Stream Error: [8911], File Size = 673015 Written Size=131072
11:56:37 F277 Error streaming an attachment [8911]
What are these?
I believe the lines with the file size/written size are files in excess of the limit set in Data Synchronizer.

Recording from Itunes radio stream

Is it possible to record playback from a internet radio stream. If so, how?? I have station that i would like to record their broadcast.

See if this helps: Software To Record Streaming Audio - Mac

Can I listen to iTunes Jazz Radio (Stream) in another room with Express?

Hi.
I am using an 802.11 a/b/g/n Extream. I listen to iTunes Jazz Radio (Stream) on my Mac Pro. Can I listen to it with the help of an Airport Express pluged into a stereo in another room? Please help.
Thank you.
W.W.

Can I listen to it with the help of an Airport Express pluged into a stereo in another room?
Yes, you can use an AirPort Express Base Station (AX) for streaming iTunes audio sources. The AX would just need to be configured as a wireless client by joining the wireless network created by the 802.11n AirPort Extreme Base Station (AEBSn).

Is there any combination of OS Lion and iTunes that can run radio streams without cutting (rebuffing) it for at least 3-4 hours?

Hello! Is there any combination of OS Lion and iTunes that can run radio streams (primarily pls-streams) without cutting (rebuffing) it for at least 3-4 hours? I am running Lion (10.7.1) on an early-2011 MacBookPro with iTunes 10.3.1 and I am frustrated, because it will cut the stream at least once per hour (it's totally random), while my older MacBook, running Tiger with iTunes 9.2.1 doesn't have any such problems ... Any solution?

Maybe you should upgrade iTunes to the current version - 10.5.3 - and upgrade Lion to 10.7.3.

Problem accessing web service, error 2032 Stream Error

I'm building a small flex app hat uses two web services
provided by the same coldfusion CFC.
I've verified that I can successfully access the web services
via HTTP, and one of the web services actually does work when
called. Both return structures that contain a string var, a numeric
var, and one or more query vars.
Here is my web service declaration:
quote:
<mx:WebService id="ws"
wsdl="https://www.it.dev.duke.edu/components/dukemagsearch/checkMailing2.cfc?wsdl"
useProxy="false">
<mx:operation name="queryDB" result="queryDBResult()"
fault="queryDBFault(event)">
<mx:request>
<RUNDATE>{cboRunDate.selectedItem.XDATE}</RUNDATE>
<ENTITYID>{txtEntityID.text}</ENTITYID>
<LASTNAME>{txtLastName.text}</LASTNAME>
<FIRSTNAME>{txtFirstName.text}</FIRSTNAME>
<MINITIAL>{txtMiddleInitial.text}</MINITIAL>
<PRFSCHCD>{cboPreferredSchool.selectedItem.TABLKEY}</PRFSCHCD>
<PRRECTYP>{cboRecordType.selectedItem.TABLKEY}</PRRECTYP>
<PRFCLASS>{txtPreferredClass.text}</PRFCLASS>
</mx:request>
</mx:operation>
<mx:operation name="getListData"
result="getListDataResult()" fault="getListDataFault()"/>
</mx:WebService>
Sorry if the formatting sucks, I don't know how to post
"code" here.
Anyway, the getListData() method works fine and populates my
list boxes. But when I call the queryDB() method, I get the
following fault event:
quote:
[FaultEvent fault=[RPC Fault faultString="HTTP request error"
faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2032: Stream Error. URL:
https://www.it.dev.duke.edu/components/dukemagsearch/checkMailing2.cfc"].
URL:
https://www.it.dev.duke.edu/components/dukemagsearch/checkMailing2.cfc"]
messageId="1E553B99-DF28-ED72-62B8-B84AA3919F9A" type="fault"
bubbles=false cancelable=true eventPhase=2]
I've looked all over the place and I can't seem to find what
this error means. I've tried all kinds of different ways of doing
things. Right now I'm browsing the flex app via a file URL (C:\...)
but I tried putting it up on the server too and that didn't work
either.
The method call *DOES* work when called via HTTP... ie
https://www.it.dev.duke.edu/components/dukemagsearch/checkMailing2.cfc?method=queryDB&RUND ATE=2006-05-19&FIRSTNAME=&LASTNAME=SMITH&MINITIAL=&PRFSCHCD=&PRRECTYP=AL&PRFCLASS=&ENTITYI D=
(You have to be logged in for that to work so you'll just
have to trust me, it returns no records if you're not logged into
the web site already).
I'm totally stressing out about this because I've essentially
spent the entire day since 8am trying to solve this. The
application should've taken 15 minutes total.
HELP!
Thanks for any suggestions y'all have.
Rick

It means your output was not formed correctly and could not
be parsed. set up a server side script or something to check that
the output is indeed what you think it should be, 99% of the time i
get thie error its due to malformed output from my webservice or
db. Also try making an xml model of your target data to test the
application internaly, look up model in the docs, it easy to use
and if the model works then you know the data is faulty and you
need to check your output and queries.

#2032 Stream Error when downloading .air file for update

Hi guys,
I have made a very simple self update air application. When
the .air file to download for updating is on a localhost server
everything works fine, however when the .air file is on a remote
server I got a #2032 stream error when trying to download the .air
file. (I tried to download the file using IE or Firefox and I get a
404 error ; btw I am absolutely sure of the .air file URL )
Does this happen because the .air file has been generated
with my trial version of Adobe Air ?
Thanks for your help.
Olivier

Thank you for your answer Oliver.
I'm absolutely sure of the URL. I set the permissions on the
remote web server to browse the directory with my explorer, I can
see the .air file but when I click on that file I get that 404
error. (I hit the refresh button of my browser to be sure to have
the correct files list). Btw something interesting to notice is
that when I rename the .air file to .zip I can download the file.
I have tried with another remote server and it works. There
may be some misconfiguration somewhere with the first server I
tried.

Radio streaming from Smart Headset Pro to Android phone

Is there an Android app (or could I write one) that plays the radio stream from the Smart Headset Pro, e.g. using the phones speakers if the earplugs are not connected.
Friedger

Hi there.
I have not seen one.
But you can check our developer blog for more info:
http://developer.sonymobile.com/
Francis.

HT1947 Radio Streaming Error

Similar Messages

Maybe you are looking for