HT1976 I get no Sim Card installed message when trying to use my phone

My phone just stopped working - I get a "No Sim Card Installed" Message.   I have not changed any settings.

So you have not changed anything or updated
try reseating the sim (assume it is a microsim not a hand cut )
and go through Apple troubleshooting
Restart ,reset ,restore
May be the sim has gone "bad"
http://support.apple.com/kb/HT1430

Similar Messages

  • After 4 days OK service, now I get NO SIM card installed message and no phone service!?

    after 4 days OK service, now I get NO SIM card installed message and no phone service!?

    Try removing your sim card, then reseating it:

  • Occasional "No SIM card installed" message on recently-received phone

    As part of an AppleCare support matter, I recently received a "new or refurbished" iPhone 3G. Generally it works fine.
    Every couple of days I get a "No SIM card installed" message, and "No SIM" appearing where the signals bars usually are. Removing and replacing the SIM card stops the message and the phone works, for a day or two.
    The same SIM card worked with no problem in my previous iPhone 3G. It also works with no problem in a plain old GSM phone I use for backup.
    Any suggestions?

    Try putting the sim in another phone let it connect and then return it to 3g .Let it reconnect .
    Completely fixed the same problem on my iPhone 4

  • HT1414 after restoring i keep getting no sim card installed when activating.

    after restoring i keep getting no sim card installed when activating.

    Was the phone unlocked offically by the carrier before restoring? If it was unlocked by a hack it will be locked again after a restore or update.

  • Keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional

    keep getting unable to load metafile message when trying to download adobe reader x

    thank you that worked now I am having the same problem trying to download adobe flash
          From: Pat Willener <[email protected]>
    To: robert hunnell <[email protected]>
    Sent: Wednesday, January 21, 2015 12:13 AM
    Subject:  keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional
    keep getting unable to load metafile message when trying to download adobe readerx to windows 7 professu=ional
    created by Pat Willener in Adobe Reader - View the full discussionYou are getting this message while downloading or installing ? If it's during the install, try the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7116186#7116186 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7116186#7116186 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I have Mac OSX 10.5.8 and get java "error" message when trying to use research tool on Morningstar Java referred me to Apple but they had no update.Any ideas? thanks.e

    I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.

    Well I solved my problem.
    What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
    Anyway... relinking my folder of audio files did the trick.
    If you don't already know how here are the steps...
    iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

  • Why do I keep getting an error message when trying to use passbook?

    Why do I keep getting an error message when trying to use passbook?

    Kind of hard to answer without some details such as iPhoto version and OS version. Are you signed into your Facebook account?

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    Hi, couple of things to try...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130
    I was recently trying to upgrade to mountain lion through the app store.  I have unreliable Internet from a cable company whom I will not name, but we all know who they are.  My Internet dropped while downloading the upgrade.  Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution.  Here are the steps to take:
    1. Make sure you have reestablished Internet connection
    2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left.  If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase.  You know what to do.
    3. There is also an option to  reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
    4. Open the Preferences in safari and select Privacy.  Select "Remove All Website Data."  Just do it.
    5. Launch the app store and sign in.
    6. Now, if you "Check for Unfinished Downloads" everything works peachy.
    I hope this helps.  Not much I can do for your Internet connection though.
    JonEz15...
    https://discussions.apple.com/thread/4697970?tstart=120

  • HT201272 Getting a "not currently available" message when trying to download old itunes music purchases to new "authorized" computer. I was able to download the first 500 songs no problem, but now I keep getting the "not currently available" message. Can

    Hi! I'm getting a "not currently available" message when trying to download old itunes music purchases to new "authorized" computer. I was able to download the first 500 songs no problem, but now I keep getting the "not currently available" message. Can u help? Thnx!

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • I get a 'blocked plug in' message when trying to view video. I have updated adobe flash, and have enabled

    I get a 'blocked plug-in' message when trying to view video, such as youtube. I have updated adobe flash, and have enabled plug-ins - still doesn't work.

    Hey reslosson,
    The article linked below provides more information about the blocked plug-in alert that you are seeing and will walk you through the process of changing the security settings in Safari. 
    Safari: "Manage Website Settings…" lets you enable the Java web plug-in website-by-website
    Cheers,
    -Jason

  • Error message when trying to use media players on new T500 ( drivers? Other?)

    Getting error messages when trying to use Windows Media Player or InterActual DVD player to play DVD or play Audio files.
    Downloaded latest audio & Video drivers from Lenovo site , Windows XP 3 patch and latest apps from Win MP and InterActual...
    Any further ideas?   Help? :-)

    Hello,
    Thank you Community Members for providing a troubleshooting tip. It is very much appreciated.  First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
    VCAST Media Manager Specs
    Next, uninstall the VCAST application and reboot your computer. 
    Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
    VCAST Media Manager
    If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
    Thank you.
    KellyW@VZWSupport

  • After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of

    After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of a solution."  When I used the trial I never received this message.  Now after purchasing it I receive this error each time I open PP and am unable to use. it.  Any ideas or support to fix this issue?

    What does the detailed crash report say?
    And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

  • I received this error message when trying to use my time capsule.  MacBook Air.sparsebundle is already in use.  What does this mean?

    I received this error message when trying to use my time capsule.  Macbook Air.sparsebundle already is use.  What does this mean?

    First, restart the MacBook Air and the Time Capsule. In most of the cases, this solves the problem.
    If not, see > http://pondini.org/TM/C12.html

  • No SIM Card Installed message iOS8

    I have a 3rd gen iPad with LTE. After any reboot using iOS7, I would get a pop up message saying "No SIM Card Installed" and that was that. It would never show up again. After updating to iOS8, this message pops up randomly and it's getting irritating.
    I've gone through every app and disabled "Use Cellular Data" but I'm still getting the message.
    I don't have a SIM installed since the data plan costs have gotten out of hand and i only use Wi-Fi. What changed with iOS8 to cause this to keep popping up and how do I stop it, save for doing a complete wipe and reinstall?
    Thanks,
    David

    I have an iPad Air and kept getting the No SIM Card message, very frustrating
    Went to the Apple store for a dummy SIM, and even after putting it in and leaving it, it didn't work.
    But I THINK I FOUND THE SOLUTION!! Haven't seen the message since I tried this
    Step 1: Take your iPhone SIM that actually works and put it into your iPad
    Step 2: Turn on Cellular Data on iPad, let it connect with network
    Step 3: Turn off cellular data, and leave the SIM card in iPad
    Step 4: Reset iPad (turn it off by holding the On/Off Sleep/Wake button
    Step 5: Turn it back on
    Step 6: Take SIM out, there should be the No SIM Card message just once
    After this I haven't seen it pop up again (for the last few hours!!!)
    Remember to like this if it works for you!!!

Maybe you are looking for

  • HT201412 Message tones is not working sometimes

    1.My iPhone 5 message tones is not working sometimes suddenly, have to restart device or eventhought sometimes is not working too after restart my device. I have to reset my iPhone n restore again . 2.Restore with iOS is not as good as last time coz

  • Itunes issues on windows 8

    I just bought a new computer with windows 8. I downloaded itunes and signed in. Initially my music played, then when I shut if off and went back, all of the songs were light gray in color and would not play. Then when I went back again, it's as if I

  • Variables not applying

    I'm new to using ZfS and I have a question about ZfS variables that I hope someone can give me an answer to. I'm deploying application objects with ZfS and I am trying to get custom macros within the application objects to be written by the subscribe

  • Everything starts to be in delay (falter) if I insert a button on the slide

    Could anyone help me out please with this problem I am facing with:  In case my slides includes voice effects/recorded speech and I insert for example 3 buttons after 20 sec for the user to choose the correct answer, everything starts to be in delay

  • Conversions using SHDB (BDC) vs. HR_INFOTYPE_OPERATION

    We've been asked to use SHDB (BDC) for our conversions unless we can use LSMW.  However, some of our conversions are so simple it seems like a waste to use BDC.  Wherever infotypes are used in conversions why can't I just do the following (pseudocode