HT1977 where do you click "sync" in step 5?

in reference to this http://support.apple.com/kb/HT1977

Be aware of something though - if you change the sync configuration - the Sync Button turns into Apply. If you make no changes to the sync configuration - meaning like you have added no new content from iTunes that you chose to sync - the button will say Sync. If you add more content from iTunes to put on the iPad - the button will say Apply.

Similar Messages

I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
You should still have your profile folder, so when you install 3. you will get your bookmarks and other user data back.
There is a third party version of Firefox that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

Any tutorials on how to create an image that you click and will call out larger?

I am designing a project where I have an image of a thumbnail paycheck. When you click it, it will enlarge into a callout. I'm thinking that you would have to build a movieclip of this image where it animates from small to large, but you build it into a button where, when you click down or mouse over, the movieclip plays which enlarges this image (almost like a pop out window, but not necessarily a new window, it's an animation). When you release the button, the image scales back to its thumbnail.

The approach you take might depend on a few things, but it boils down to using mouse interactive coding to trigger whatever effect you eventually realize. The code you use will depend on the version of Actionscript you plan to use.
You could make this as a movieclip that is normally stopped at its first frame and when you mouseover or click the movieclip, it animates along its own timeline to its enlarged state. If the thumbnail is very small and the larger version is substantially larger, and both need to be clear images, this might be the better approach.
If this only involves enlarging something, you could also probably realize it just using Actionscript Tween coding rather than timeline animation.

Where do you find the ringtone tab on your personal itunes so that you can sync new ringtones to your iphone?

Where do you find the ringtone tab on your personal itunes so that you can sync new ringtones to your iphone? I am trying to get ringtones from my ringtone app onto my phone and the directions said to click Ringtones on the top of iTunes. I am having trouble finding the Ringtones on the top of iTunes.

Go to edit then preferences in itunes on your computer and then check the box TONES and then click OK. with your phone attached to your computer with USB cable select the name of your phone on the left and then in window on right select TONES from the menu items across the top of the window

I am having problems syncing my iPad 2 with iTunes. Whenever I click "sync" or "apply," the sync begins. As soon as it gets to step 3 (in this particular case "determining apps to sync") it immediately stops syncing. What's the deal here?

I am having problems syncing my iPad 2 with iTunes. Whenever I click "sync" or "apply," the sync begins. As soon as it gets to step 3 (in this particular case "determining apps to sync") it immediately stops syncing. What's the deal here?

You haven't purchased apps with multiple Apple ID's have you? If you have, you can only sync with one Apple ID in the iTunes library at a time. Whichever ID you are signed into on the computer and the iPad would determine which apps would sync.
Have all of your apps been transferred into iTunes for your iPad?
iTunes Store: Transferring purchases from your ... - Support - Apple

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

In BPM sync/async Step , can you have different message schema?

Scenario:
File to XI to BPM to SOAP to RFC
In order to trigger the webservice , I use a dummy file which will be polled at a certain frequency- once in 30 minutes in Test mode - this will call the Webservice. The answer of webservice is sent to RFC Async.
so these are the Repository objects I created :
1. File Outbound Async Message Interface- Output Message (File_Request_MT)
2.File Abstract Message Interface-Output Message (File_Request_MT)
3.Async/ sync bridge Abstract interface to call the Webservice
4 Webservice Inbound Sync Message interface- with both input and output message
5.RFC Inbound Async message interface- input message (RFC_Request)
6 RFC Abstract Async Message interface-input message (RFC_Request)
BPM
a) Receive step which uses the the object 2.
b) Sync send which uses object 3
c) Send step which uses Object 5
I am using a BPM to Receive the file data/ "request " by using the File abstract message interface
Then use the the object 3 to call the webservice in BPM .
My question is on this step
Can I have for the abstract Interface(Object 3) the Request message as File_Request_MT and
response message as (RFC_Request) ?
I use a message mapping to map Input and Ouput message of Object 3 with Object 4.
Thanks for your insight

Raj,
Thanks for the feedback , but I have a question regarding your reply
Interface Objects
Object 1: File_Request_Abs
Object 2: Soap_Response_Abs
Object 3:Soap_Abs_Synch
Output Message:File_Request_Abs
Input Message:Soap_Response_Abs
Object 4:Rfc_Request_Abs
The question is about
a)SOAP_RESPONSE_ABS : could you please tell me why do we need an abstract interface -SOAP_RESPONSE_ABS?
I created a message type MT_SOAP_RESPONSE and used that in the BPM sync Send step as the Input message.
b)Soap_Abs_Synch- I am using message types
MT_File_request and MT_SOAP_Response From your reponse, it looks like you are suggesting to use
Abstract Interfaces as Output message and Input Message, am I correct? Could you please tell me whether this has advantages over using message types MT_file_request and MT_soap_reponse? I haven't used Abstract interfaces before as Input message and output message; infact, I wasn't even aware that it can be. Please confirm that it is possible. Thank you for increasing my knowledge !!!
These are the Objects I created
Message Type :
a) MT_Filerequest
b) MT_SOAPresponse
Message Interface
a)MI_Filerequest_out_async -
Output message
Mess. type MT_filerequst
b)MI_filerequest_async_abs-
Mess. type MT_filerequst
Used
i) used for BPM receiver step- container definition
ii) receiver determination
c)MI_webservice_sync_in - This is created from External definition
d)MI_webservice_sync_abs-
Input message - MT_soapresponse
Output message- MT_fierequest
Used:
i) used for BPM sync send step ,
ii)Interface mapping between MI_Webservice_sync_in and MI_webservice_sync_abs
iii)Container element-SOAP_response
e) MI_RFC_async_out
Input message
RFC_Request(This is imported from RFC definition)
g) MI_RFC_async_abs
Input message
RFC_Request(This is imported from RFC definition)
Mapping
Message mapping
i)Filerequest_TO_SOAPrequest
Source: MT_Filerequest
Target: SOAPrequest(Got from External definition)
ii)SOAPresponse_TO_BPM_response
Source : SOAPresponse(got from External definition)
Target : MT_SOAPresponse
Interface Mapping
i)IM_BPM_TO_SOAP
Source Interface : MI_webservice_sync_abs
Target :MI_webservice_sync_in
uses following message mapping
Request : filerequest_TO_SOAPrequest
Response:SOAPresponse_TO_BPM_response
BPM container element
i)Receiver_container TYPE MI_Filerequest_out_async
ii)SOAP Responsecontainer TYPE MI_webservice_sync_abs
iii)RFC_Request_container TYPE MI_RFC_async_abs
BPM flow
Receive---->Send Synch-->Transformation----->Send Asynch
Receive -
> receiver_container
Send Synch -
> receiver_container(Request Message), Soap_response_container(Response Message)
Transformation -
> Source(Soap_response_container), Target(RFC_request_container)
Send Asynch -
> RFC_request_container
Thanks for your help!!!

I want old tabs back where you click on the + sign not the double click to add a tab. What theme should I use?

I want the tabs where you click the + sign back. I always max out my amount of tabs with the new double click system on FF4. Help me to find themes that have the old + sign add tab function.

Firefox should have that + sign to open a new tab on the tab bar.
If that isn't the case then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

HT1977 I downloaded an app on my PC, signed into my iTunes account, but when I connect my iPhone and click sync, it won't copy to my phone. How can I get this app to install on my phone?

I downloaded an app on my PC, signed into my iTunes account, but when I connect my iPhone and click sync, it won't copy to my phone. How can I get this app to install on my phone?

Your phone connected, iTunes running, under the "Apps" tab, you've selected this app to install on your phone, correct? Hit the "Apply/Sync" button, lower right on the Apps tab, what happens?

Having trouble syncing my mobile phone, adding a device, with firefox 4.o where do you find "add a device"?

Where do you find the "add a device" option in firefox 4.0 so that you can sync your mobile phone to your desktop?

Maybe I am missing something here, but I don't see a toolbar like that on my 4.0 version. I had already seen the help information. Thanks. I thought perhaps those were the directions for version 3.0? Am I missing a toolbar?

Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

i have the same problem no radio stations at all bit shabby hate technolgy now adays

I purchased lion osx 10.7 and it has just said "installing" where you click to "buy now" for the last 2 hours. There is no progress bar or anything. What is going on?

I purchased lion osx 10.7 and it just says "installing" where you click to "buy it now" and it has been doing nothing for the past 2 hours. There is no progress bar or anything that says its being downloaded. I was sent an email by apple confirming I purchased it but nothing is happening. I tried restarting the internet and clicking on download and the same thing happens. What is going on?

Mine says it's going to take 10 hiurs to download or something daft. I'm guessing the servers are being hit pretty hard right now. Like the poster above said, check in the 'purchased' part of the app store to make sure it's actually ticking along and then just...wait.

Centering layers in window no matter where you click

Hey,
Here's my site:
http://www.rocknclothing.com/store.
I'm trying to make it so that no matter where you click each
shirt that the layer shows up dead center in the browser. Is there
any way to do this? Script add-on or an extension? Any help is
greatly appreciated.
thanks!

bump

HT1296 I want to transmit my whole iTunes library (about 4GB) to my iPod. When I click "sync," the window goes quickly through the steps and quits, but the music does not show up on my iPod. It says "no music." I have followed the instructions, but no res

I have followed instructions for transferring my iTunes library from my MacBook Pro to my iPod. The summary window shows lots of unused memory and it partly fills when I hit "sync," but then returns to nearly empty and the music does not show up on my iPod--"no music." Any suggestions would be appreciated. l've read all the instructions I can find. Thanks.
macsept

Check your settings.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
Have you successfuylly synced from this iTunes library/computer before?

There is a 3 inch section of the window that will not recognize the mouse. It will not let you click on the icons or screen in any way in this section under the address bar. It is only in firefox where this is a problem

There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT1977 where do you click "sync" in step 5?

Similar Messages

Maybe you are looking for