HT1998 Airport Utility 6.2 no options for managing MAC filtering

Any ideas how I can manage add a MAC address that is allowed?

The AirPort Utility does not offer an option for MAC filtering. At least not directly. What it does provide is an option for Timed Access Control where wireless clients' MAC addresses are used to determine which can connect.
You will find this option on the Network tab > Timed Access Control

Similar Messages

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
AirPort Utility 5.6 for Mac OS X Lion

HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

In my Airport Utility a read the following message:
This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

HT5022 I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express. But when I go to mount, it says it can't be installed as version of OSX (latest Mountain Lion) is not supported. Feels like Im back using Windows...

I've downloaded AirPort Util 5.6, in order to manage my Gen 1 Airport Express - because Airport Util 6.0 won't recognise it.
But when I go to mount, it says Airport 5.6 it can't be installed as my version of OSX (latest Mountain Lion) is not supported/does not support on 5.6.
Super unhelpful error messages bringing back memories of using Windows...
Anyone sussed this, or have Apple just fazed out the original Airport Express hardware on the sly?

Generation 1 AirPort Express is Model No A1264. Check the side of your Express to look for the model number there. AirPort Utility in Mountain Lion will configure this model.
More likely, you have an older "b/g" version of the Express. Apple started the "Generation" thing with "n" capable devices. The Model number of your device is likely either A1084 or A1088. AirPort Utility in Mountain Lion no longer supports these older "b/g" devices.
If you have a Mac there running an earlier version of the operating system, you can use that to configure the Express.
Or, there is is workaround to install AirPort Utility 5,6 for Lion on Mountain Lion. See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

Are the new displays for MacBooks only - Options for a Mac Pro User?

I am currently running 23 inch displays in our small design studio (4 workstations). I need a new or a second display for my own Mac Pro. I hate the new 24 inch display. I cannot imagine running Final Cut Studio on this glossy screen. So is anyone else out there in this situation? Looking for other choices? I want to stay in the Apple line up if possible but now I am even looking at Dells, as I feel Apple will only continue with the glossy screens.
Are any pro-users in video or photography using the new 24 inch displays? and I mean users who do this for a living. Thanks everyone?

Hello!
Sorry it took a while to notice your post. There are two options for your mac pro to use the new 24 inch cinema display. The ATI Radeon 4870 HD has the mini-display port on it, and the Nvidia GT120 also is an option. Personally, I'd go with the 4870 as its a much better graphics card.
You can find them on the Apple store's site under DISPLAYS/Graphics
Hope this helps.
Now, just to clear something up. If you have a 2008 mac pro, you can run the GT120 if you prefer.

AirPort Express Not Showing as Option for Playback

I have an AirPort Express (new with latest firmware) connected to my Wireless LAN (802.11g). Both of my computers can see it (that is, I can access it from the configuration utility), however, when I load iTunes it will not show as a playback option (pulldown on bottom of iTunes screen) on one computer, unless I first ping the IP of the AirPort. Sometimes this works, sometimes not. Note that iTunes is not loaded on the other computer at the time and I do not have a firewall between the computers on the LAN. I am using WEP encryption, but I've entered the key successfully on both computers and on the AirPort. I've also opened the specified port (5353?) on my router, although that shouldn't matter, as I'm not trying to route outside my LAN.
As mentioned I have latest AirPort firmware and iTunes upgrades loaded on both Windows XP computers, as well as SP2.
Ideas or suggestions?
Various - Mac & Windows XP Windows XP Pro Windows XP can't find AirPort
Various - Mac & Windows XP Windows XP Pro

i assume your airport extreme base station (AEBS) is you main router and you want the airport express (AX) join the network provided by the AEBS.
you could try this:
unplug and re-plug the airport express (AX), then click on the airport icon in your menu bar. you should see something like "Apple network bj1234567" or similar (it may take a little while for it to show up). in order to set up the express, you will have to temporarily join its network ! you will get a message asking +do you really want to switch networks ?+ and you do want to do that.
launch airport utility (AU). you should see the AX on the left. click on the icon of the AX once to highlight it and click continue. follow onscreen instructions and, when prompted, choose to +join an existing network+ and enter the required information for your network.
any help ?

I have Airport Utility 6 but AU asks for 5.6 and I can't go back and the Ute doesn't find my base station.

I did hard and soft reset the base station but then I get this ms.
I cannot install AU 5.6 because I'm running OS 10.8.2. What can I do?
rixxir

It is possible to install AirPort Utility 5.6 on Mountain Lion.
See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Airport Utility detect/retain Time Capsule for network

Airport Utility won't keep recognizing Time Capsule. Works when I set it up, then when close computer and come back - lost network again.
I also have an airport express that is not being recognized at all??
Any suggestions

Airport Utility won't keep recognizing Time Capsule. Works when I set it up, then when close computer and come back - lost network again.
When having difficulties accessing the Time Capsule (TC) thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
o Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "factory default" reset on the base station.

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

Downloaded iPhone SDK, ran Xcode, no option for iPhone - Mac OS only!

Hi everyone,
I downloaded the free iPhone SDK and ran the installer. Whenever I launch Xcode however, there is no tab for iPhone applications - only Mac OS. I took a peak inside the packages folder in the download and spotted files named "iphone SDK", so I'm confused.
Any idea on why Xcode runs but there is no option for iPhone?
Thanks,
Xeno

Hello,
On my PowerPC G5 I have a similar issue where I installed Mac OS X 10.5.6, but after installing the iphone SDK I do not see any refs to iphone when in Xcode.
I even tried the suggestion here:
http://3by9.com/85/dont-have-an-intel-machine-but-want-to-code-for-the-iphone-an yway-follow-these-steps/
This however, resulted in the same issue.
Any suggestion on how to resolve this would be most appreciated.

Slideshow option for PSE mac version?

Does anyone know if and when we can expect a slideshow option for mac PSE? I switched over from PC to MAC in a very laborious process and am annoyed that this feature was missing.
Can anyone recommend a program or solution that works with PSE to create slideshows that would be similiar to the PSE PC version?

Nobody can say about that except adobe, but I wouldn't hold your breath. As for substitutes you can make slideshows in imovie and iphoto, or there's fotomagico, which is probably the most popular non-apple program, and several others. If you have a computer that came with idvd (not on newer macs), that does nice slideshows, too.

Options for second Mac Pro display

I have been looking for a second display for my Mac Pro. Since it won't be used all of the time I don't want to spend the money for the Apple display. I recently tried a Samsung T240 24" HD monitor but had to return it because it caused severe eye strain. I can use the 23" Apple display all day long with no problem, but an hour with the Samsung caused eye strain no matter what combination I set for brightness, contrast, etc. The "Apple Expert" at Best Buy claimed that it was because the graphics card doesn't support high definition, but his answers to some other questions didn't impress me. Will I have problems with any HD monitor, or was it this particular Samsung? Any suggestions?

I have solved the problem by purchasing a Dell S2209W display. It is an HD monitor and seems to be working fine with no eye strain. Of course, it is not as nice as my 23" Apple display, but at $239 it is perfectly adequate for use as a second display. I still don't know why I had problems with the Samsung, but I am happy for now.

Airport Extreme 802.11n upgrade options for early Intel Core Duo iMac

I have an iMac from mid 2006. I recently purchased a Timecapsule - partly for the wireless back ups, and partly to upgrade my wireless network to 802.11n. There is a software upgrade from Apple that upgrades older 802.11 a/b/g Airport cards in the iMac to 'n' standard. Here is the link:
http://store.apple.com/uk/product/D4141ZM/A?fnode=MTY1NDA0Mg&mco=MjIzMDkzNA
The page states that the upgrade is compatible "If you have a Mac with an Intel Core 2 Duo processor (except the 17-inch, 1.83GHz iMac)". What it doesn't tell you is that if you have an early version of the iMac (pre-Sept 2006) that shipped with the Intel Core Duo Processor (note - not the Core 2 Duo) then the upgrade will not work. I have also tried to install Airport Extreme updates (2007002 and 2008004) and these report that the hardware is not compatible. Doing some searching around these forums and others, the issue with the original Core Duo iMacs not being upgradeable to 802.11n is out there - shame Apple weren't more explicit.
I have seen that there are various USB based 802.11n adapters available. Whilst searching on this topic, I also came across a site offering various Mac upgrades, including an upgrade to the Airport card to upgrade wireless capability from 802.11g to 802.11n. It looks like a straight replacement for the internal card - link here:
http://www.macupgrades.co.uk/store/productinfo.php?productsid=461
The company offering this is in the UK, but the product appears to be from a Sonnet, a US company. Does anyone out there have experience of installing this product (or having it installed) and can you comment on how it performs? Is it a seamless replacement for the original Airport card?

What it doesn't tell you is that if you have an early version of the iMac (pre-Sept 2006) that shipped with the Intel Core Duo Processor (note - not the Core 2 Duo) then the upgrade will not work.
If it says you need to have a Core "2" Duo processor, then it seems to me they are telling you very clearly that it will not work with the earlier Core (no "2") Duo iMacs.
The "late 2006" iMacs with Core 2 Duo (except for that one education model they mentioned) have wireless networking hardware that is 802.11n capable. When they were initially sold, Apple chose to NOT enable the "n" capability for some reason; maybe because the standard was still in flux and not enough testing had been done with the driver. Later, they enabled the "n" capability with a firmware update. But that was only possible because the wireless hardware was already capable of doing "n."
Earlier iMacs do not have this hardware so there is no way to enable it with a firmware or software update. 802.11g is plenty fast enough for Internet access (you won't notice a difference with "n"). If you are using Time Machine over wireless, it may take a while longer to do that initial backup (you could connected it by Ethernet cable when it is doing that initial backup), but subsequent backups are incremental, so the "g" versus "n" speed difference will not be as critical. Since your iMac is Core Duo (32-bit) and the future of Mac OS X is 64-bit, especially after Snow Leopard's release, it may be best to save your money and keep your iMac intact (not opened).

Trying to use the Airport Utility it repeatedly asks me for a password

It has the trying to access loading bar pop up for 10 seconds, then asks me for the password, which I type in. It then accepts it and loads some more.... and then asks for the password again.
One time it eventually loaded up so I could configure, but most of the time it just repeats this indefinitely, and when the loading bar finally hits the end (after asking 15 times for the password) it goes back to the beginning.
This repeats until I get frustrated and quit trying or it gives me an error message telling me to make sure the connection is valid (error 10057). Obviously its a valid connection because I'm posting this right now.

With the phone connected look in iTunes. Click on the phone's name. Is Encrypt Backup checked? At some time in the past it was checked and you entered a password to encrypt the backup. In general this is a smart thing to do, but you need to remember the password. After the first time it will not ask again. If you have a Mac the password may be in your keychain. The good news is that you get as many tries as you want to guess the password. Think about what you might have entered as a password the first time you backed up the phone. To speed up the process uncheck "Encrypt backup". It will immediately prompt for the password.
If you have a corporate Exchange email account on the phone the requirement to encrypt may have come from your Exchange administrator. If this is the case try some old domain passwords.

HT1998 Airport Utility 6.2 no options for managing MAC filtering

Similar Messages

Maybe you are looking for