HT200069 Clients cannot connect to VPN service using L2TP - also on OSX Server on Yosemite?

I can connect my mac to my VPN server when on my local network but when I try to connect through the Airport Express from outside I get
Racoon: not acceptable Identify Protection Mode
The attached screenshot shows the error when I try to connect through the airport express and then the successful connection when I try to connect on the lan.
I think the problem may be transient - since I think it worked OK earlier today both ways and now it will only work when i connect from the LAN
Running 10.10.3 and Server 4.0.3 (14S350)

Thanks - I knew this one already and it did not help.
Further searching turned up that it seems to be due to ESP prototcol and a conflict with Back to My Mac.
http://apple.stackexchange.com/questions/25969/vpn-on-os-x-lion-server

Similar Messages

Cannot connect to VPN through NetworkManager anymore.

I cannot connect to VPN through networkmanager anymore. Last time used it, it worked perfectly but I don't use it so often and last time was 2-3 months ago. So I don't know what went wrong, or which package upgrade broke it.
I switched to systemd a month ago, it may or may not be related.
I can still connect from the commandline using the vpn/vpn-disconnect tools.
All that happens is an alert windows saying: "The VPN connection '......' failed because there were no valid VPN secrets." And here is the journal:
NetworkManager[355]: <info> Starting VPN service 'vpnc'...
NetworkManager[356]: <info> VPN service 'vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 9214
kernel: tun: Universal TUN/TAP device driver, 1.6
kernel: tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
NetworkManager[356]: <info> VPN service 'vpnc' appeared; activating connections
NetworkManager[356]: <error> [1349687970.426748] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <error> [1349687973.943758] [nm-vpn-connection.c:1405] get_secrets_cb(): Failed to request VPN secrets #3: (6) No agents were available for this request.
NetworkManager[356]: <info> Policy set 'MYSSIDOMITTED' (wifi0) as default for IPv4 routing and DNS.
NetworkManager[356]: <info> VPN service 'vpnc' disappeared
All neccessary vpn packages for networkmanager are installed.
Google did not turn up any useful info other than a few year old threads saying "upgrade your networkmanager".

Well, I managed to get the auth dialog to show up reliably by applying a couple patches from this Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=679212
Still getting breakage in that it's not properly authenticating:
Attempting to connect to redacted:443
Using client certificate '/CN=redacted'
Client certificate expires soon at: Dec 5 02:57:05 2012 GMT
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/
Got HTTP response: HTTP/1.0 302 Object Moved
SSL negotiation with somesite.somedomain.com
Connected to HTTPS on somesite.somedomain.com
GET https://somesite.somedomain.com/+webvpn+/index.html
GET https://somesite.somedomain.com/CACHE/sdesktop/install/binaries/sfinst
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Refreshing +CSCOE+/sdesktop/wait.html after 1 second...
GET https://somesite.somedomain.com/+CSCOE+/sdesktop/wait.html
Failed to read from SSL socket
Error fetching HTTPS response
This behavior is not what I'm getting from the command-line client, of course, so... still digging.

New-Pssession client cannot connect to the destination specified

I've used the following cmdlets to connect powershell to our tenant for months and now I cannot open a possession with the same commands.
I've searched on some of the error text show below without any great progress. We have a pair of Hybrid servers and we get the same result on either.
Any suggestions are appreciated.
Bruce
Import-module msonline
$O365Cred = Get-Credential
$O365Session = New-PSSession –ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $O365Cred -Authentication Basic -AllowRedirection
Import-PSSession $O365Session
Connect-MsolService –Credential $O365Cred
[email protected]
working password at the MicrosoftOnline Portal
$O365Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $O365Cred -Authentication Basic –AllowRedirection
WARNING: Your connection has been redirected to the following URI:
https://pod51038psh.outlook.com/powershell-liveid?PSVersion=4.0
New-PSSession : [pod51038psh.outlook.com] Connecting to remote server pod51038psh.outlook.com failed with the following error message : The client cannot connect to the destination specified
in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service,
run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see the about_Remote_Troubleshooting Help topic.
+ $O365Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUr ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
Import-PSSession $O365Session
Import-PSSession : Cannot validate argument on parameter 'Session'. The argument is null. Provide a valid value for the argument, and then try running the command again.
At line:1 char:18
+ Import-PSSession $O365Session
+
~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [Import-PSSession], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.PowerShell.Commands.ImportPSSessionCommand
Connect-MsolService -Credential $O365Cred

You are using the outdated URI string, which is known to cause problems. Should be: https://outlook.office365.com/powershell-liveid/
Just follow the instructions in the TechNet article:
https://technet.microsoft.com/en-us/library/jj984289(v=exchg.150).aspx

The client cannot connect to the server

we just installed the boe but found that the client cannot connect to the server.
server: windows server 2008
boe xi3
client: window xp sp3
the server and client are in same dns
all components are work in server but client.
any idea on this?
ps: i can ping the server name successful.
thanks
ada
Edited by: Ada_Wei on Oct 29, 2010 10:12 AM

Can you please try to stop and disable the Windows firewall service on your client machine?
WHich client do you use and which error message do you get exactly?
Regards,
Stratos

BPC 7.0 Server Installation Problem - Cannot connect to reporting services

I am upgrading from 5.1 to 7.0 version for SAP BPC. Everything went smooth on the development server (single instance installation including SQL Server 2005 developers edition 32bit, web, reporting and application services on the same server). I tried to repeat the same process on the test server, and the installation went off the rails. I started with clean installations of SQL Server 2005 on both servers.
When I try to install the BPC server software, I get to the point of access to the report server, and everything stops. I get the following message: Cannot connect to reporting services. I have verified the reporting server name, and I have verified that the server name is correct in the installation panel. I have also verified that the reporting server is configured, started, and that there are no errors.
Any advice?

Hi Sorin,
Thanks for the tip, but this was not the case. The problem was solved by re-loading the OS. Using Windows Server 2003 gave an issue during the re-installation of the SQL Server database. The problem was in the installation itself. After a clean install of both the OS and SQL Server, then SAP BPC 7 worked. The installation does require a number of tweaks, particularly, in my case, the entire Management console must be configured, even if not being used.
This problem is now solved.
J.

Cannot connect to the Service Manager portal WCF service - Error when opening SM Portal

Greetings,
I have tried everything I can think of to resolve this issue and I have tried all suggestions I have found on Technet.
Basically, I had the SM Portal working on a test VM. I am ready to use it in production but it is not working. I deleted my test VM and built a new one. On it, I have SharePoint 2010 Foundation and the SM Portal installed. I have
a valid self-signed cert. the FQDN is correct (hqsrva24.dds.local) in both SharePoint and also in IIS. I also made sure under Application Settings on the SM Portal IIS site points to the FQDN of the SCSMWebContentServer.
So what happens when I go to the SM Portal (https://hqsrva24.dds.local:444/SMPortal) is it prompts me for a logon, which i put in and the site comes up. But at that point the Silverlight portion is not loaded and I immediately get prompted for a logon.
I have tried several different logons, all of which have full access to the site in Sharepoint. Eventually I get the error in red at the bottom of the screen "Cannot connect to the Service Manager portal WCF service"
If I try to access the Web Content Server service on its own (https://hqsrva24.dds.local/Servicehost/services/DataAccessService.svc), I get a prompt to logon and none of my logons work. i eventually get
an unauthorized error. However; If I log into the server which SM Portal is on and go to https://localhost/Servicehost/services/DataAccessService.svc, I get no prompt to login and I get a "Metapublishing for this service is currently disabled."
I'm out of ideas at this point, barring completely starting over (not just the SM portal but all of the Service Manager Suite).

Man I've had this problem so many times and its almost always a different solution. Are you sure that either the Domain Users group or NT Authority\Authenticated Users have permissions to the site and service. remember the the two prompts are authenticating
different things: the Sharepoint site and the application site (silverlight). Make sure users have permission in both SCSM and in Sharepoint.
- Slow is smooth and smooth is fast.

Cannot Test this Web Service using the Test Page

Hello,
I'm using
- JDeveloper 11.1.1.3.0
- SOA Suite 11.1.1.3.0
- Weblogic Server 10.3.3
- Windows XP SP3 (german version)
Now I'm having a BPEL-Process (SOA) Project created in JDeveloper and deployment to the server works fine, i.e. the service can be seen in enterprise manager.
But if I want to test the service using the webservice tester it get the following error if I copy the URL for getting the WSDL file to another browser tab:
Cannot Test this Web Service using the Test Page
Endpoint Name : FabricProvider (Service Description)
You can test the Web Service using a Java client.
Failed to Load a composite for composite identified by default/ReisebuchungService!1.0*soa_6aebb5fb-7830-497b-b853-839518d112f0
Please verify that the composite has been deployed.
Can you help me with this issue? I have no idea where to start debugging or resolving the problem.
Thanks in advance

Heya
others and I face the same issue, reported here:
TP4: Cannot Test this Web Service ...
Oracle is not too responsive on the issue though.... :(
Cheers Christian.

Cannot connect to the net using my wi fi on my blackberry curve

hi there, i cannot connect to the net using my wi fi on my blackberry curve 8520. wen i go in to settings and click on to manage connections it as a tick at the side of wi fi and says TALKTALK- 3B0BD4 and a tick at the end. if i turn my mobile network of my signal goes, and when i try to connect to the net a message comes up saying unable to connect to the internet, please try again later. if the problem persists please contact your service provider.when i try to set up a new wi fi connection and scan for networks it comes up with TALKTALK-3B0BD4 and undernieth it says connected and the signal is full at the side of it? many thanks maria

i cannot browse the internet thru wifi using bb curve 9360..when i checked my wifi settings it says that im already connected but when im trying to browse it says cannot connect contact your service provider

8.8 Client cannot connect to Windows Server 2008 error -1102

SAP Business On 8.8 on PL 18
This is not the first time I have had this issue with Windows Server 2008.
however everytime the resolution was diffrent. Now this site is causing trouble.
The issue is the client cannot connect. We have the log on window, can see the company list. type on the password and we get a -1102 error.
The client on the Server itself can log on. It is the cleints that cannot.
I checked these below.
1 SQL Native client is installed and ok.
2. Licence server is configured and ok
3. The user has admin access to locl PC
4. The SAP user name and password are correct ( client on server can connect fine )
5. The ports 1433, 30000 and 30001 are open on the server.
6. Through SQL server configuration the named pipes and TCP are enabled.
7. SQL server browser is running
The only things I have not tried are
The Firewall is running on the server and I have not yet stopped it. Will try that tomorrow.
Do you have any other ideas please ?

I have got this working but I am not confidant of the outcome - yet - I really need your expert advise here.
This is what I did. In that order.
1.     As Owen suggested I checked if there was a specified Port for the instance. What I found was TCP Dynamic ports were enabled ( SQL server config manager | network configuration | tcp properties ) and there was no TCP port specified. Assuming ( ai may be wrong) that the system assigns a dynamic port to this instance I set it up so the Dynamic port does not happen and manually specified the Port 1433. Restarted the SQL Service. ( still having the Port 1433 open in the firewall). This did not solve the issue.
2.     With the above setting still on, switched off the firewall. Went to the PC client and SAP can log on now. Now keeping the SAP client running, switched on the Firewall on the server. Log off SAP on PC client and log back in ( with firewall off ). SAP now can log on.
3.     I had to do the above step for all PCs to get them working.
4. Currently the firewall is on and clients can connect
So what could be happening? I have no clue. It is apparent there is some setting that gets saved within the PCs ( may be user profile) after the first log on with the Firewall off - to say its safe ?
However I have no idea what will happen if the server is restarted u2013 this server we cannot restart any time we want as itu2019s a critical server and runs other things.
I would still like to get to the bottom of this to understand what is happening.
I have a SAP message running too and will ask them this same question.

PowerPoint - Present Online - Error starting online presentation - Cannot connect to this service. Check your network connection and try again.

"Present Online
Error starting online presentation
Cannot connect to this service. Check your network connection and try again."
On March 31, we starting experiencing this issue across our entire domain. We have not made any changes to our network configuration. We are using the same ISP, routing hardware, computer hardware, software versions and group policy settings as we were on March
30.
The issue appears to be related to network connectivity.
Here is what I have found so far:
We have three networks in our building and two ISPs.
Network-A uses ISP-A and is affected by the issue. Network-A is our corporate domain.
Network-B uses ISP-B and is affected by the issue.
Network-C uses ISP-B and is not affected by the issue.
If I take a Network-A domain member and launch PowerPoint while connected to Network-A and ISP-A I am unable to upload PowerPoint presentations.
If I connect the same computer to Network-C, the issue persists.
If I close PowerPoint, connect to Network-C, and reopen PowerPoint while connected to Network-C, I am able to upload presentations.
A non-domain computer is affected by the issue if PowerPoint is opened while connected to Network-A or Network-B, but unaffected if PowerPoint is launched while connected to Network-C. Again, in this scenario, switching connections while PowerPoint is open
has no effect.
The issue appears to be caused during PowerPoint start-up and not while attempting to share a document.
Microsoft is either unwilling or unable to find a resolution and has finally resorted to simply ignoring my calls, voicemails, emails, and ticket requests regarding this issue. Any suggestions would be greatly appreciated.
Here is a brief description of our configuration and what I have tried so far.
Windows Installer Version 5.0.7601.18493
OS Details Microsoft Windows 7 Enterprise , SP 1, Version: 6.1.7601, Codepage: 1252, Country Code: 1, Language: 1033, System Type: x64-based PC
Microsoft Office 365 ProPlus - en-us
ProductVersion 15.0.4701.1002
License Family: OfficeO365ProPlusR_Subscription1
License Status: 1 - LICENSED
Intel Core i3
4GB DDR
ISP-A => 100mb fiber
ISP-B => 30/50mbps down / 3/5mbps up cable
Clearing the internet cache
Clearing the OneDrive cache
Adding all related office.live URLs to trusted sites
Selecting lowest security settings for trusted sites
Changing permissions on the .ppt file to allow full permissions to everyone
Creating a blank PowerPoint presentation
Changing the location of the .ppt file to the local drive's user folder
Upgrading Office
Repairing Office
Downgrading Office
Installing Skype (Microsoft recommendation)
Leaving the domain
Rebooting the routers and switches on Network-A
Rebooting the router on Network-B
Upgrading the firmware for the router on Network-B
Disabling the firewall on Network-B
Enabling the firewall on Network-C(in an attempt to induce the problem)

The problem seems to have fixed itself, the computer may just have needed to be restarted.

Cannot connect to the cloud using Adobe Ideas

I've been through 2 (two) Adobe Technicians and neither of them could help me. One of them told me that Adobe Ideas wasn't meant to be used with an iPad.
I can email an illy from Ideas, but cannot connect to or see the Creative Cloud files.
Do I need additional software, Apps, or what?? Any ideas for Ideas?

i cannot browse the internet thru wifi using bb curve 9360..when i checked my wifi settings it says that im already connected but when im trying to browse it says cannot connect contact your service provider

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

ODI Client cannot connect the datebase after the datebase IP changed

ODI Client cannot connect the datebase after the datebase IP changed.
1,the datebase on mac A,the mac changed ip
2,on the client, tnsping db is ok.
3,use pl/sql ,can connect on the db
4,with odi,changed the repostry URL to the new db IP,throw the exception below
java.sql.SQLException: Io Exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
     at com.sunopsis.sql.h.run(h.java)
Is anything we need to config after change db machine IP?

yeah,I got it.Everything is ok now.
After change IP,we must open TopologyManager:change the JDBC connection of workrepository which must chose in Designer.
when we open the Designer ,it will connect to db.then coonect to workrepository with original IP.So,we must rechange workrepository's JDBC first!

6500A-710n cannot connect to web services

I was on web services and receiving printing apps. Suddenly, my apps stopped printing. I have tried all the other solutions, resetting to default, etc and still cannot connect to web services. It asks for a proxy. I have put the google proxy 8.8.8.8 and 8.8.4.4 but these don't work. What proxy & port can I use?
thanks for your help.
Nancy
This question was solved.
View Solution.

Hi Nancy,
I'm sorry to hear that you are having problems with your print apps not printing as scheduled.
To better assist you, would you please provide some further information:
Has there been any changes to your home network (new internet provider, new router, or new network password)?
Are you able to send to print jobs to the printer's ePrint email address?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot connect to web services HP 7525 printer

It used to work fine. Now I jsut get the message "unable to connect to web services......" I've chcked and the printer is connected to wifi. I tried the solution posted " put IP address in a browser etc...... but when I do that in Exploer all I get is jiberish, no web page with the network buttons.

Hello @JACKUSHNER,
Welcome to the HP Forums!
I understand you're receiving a message stating "unable to connect to web services" using the Photosmart 7520. I will do my best to assist you! I would start off by following this entire HP document on A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

HT200069 Clients cannot connect to VPN service using L2TP - also on OSX Server on Yosemite?

Similar Messages

Maybe you are looking for