HT200077 Cannot configure WiFi Payload in configuration profile.

I'm getting an error applying the profile with a WiFi payload configured with WPA/WPA2 enterprise as recommended.
Error codes 4001, 1009, 13000, 13004.
Using just WPA2 enterprise, I'm able to at least install the profile but it won't connect to my WPA2 enterprise network.

I have this same issue.  Were you able to resolve it?

Similar Messages

  • Certificate in the identity section of mdm payload of configuration profile.

    Hi,
    I am using iPhone configuration utility to create a configuration profile. I want to have an mdm payload. It has an identity section which needs a credential.
    Thr credential section has this text >> "Use the Credentials settings payload to add certificates and identities to the device. Certificates in PKCS1 and PKCS12 format are supported. Use P12 (PKCS #12 standard) files that contain exactly one identity. The file extensions .p12 and .pfx are recognized. When an identity is installed, the user is prompted for the passphrase that protects it, unless you include the passphrase in the payload."
    I dont know what certificate I need for this? I have a developer certificate and a certificate available for me in the "Other" tab of certificate section on the iOS provisioning portal. This certificate is "Mobile Device Management CSR Signing Certificate"
    They are not accepted as valid entries in the identity section.
    I am blocked and cannot create a configuration profile. Any help is highly appreciated.
    Thanks in advance

    I had the same problem, i had 4 certificate, which one is need here?
    1. devepoler certificate
    2. Mobile Device Management CSR Signing Certificate
    3. MDM_<company>_Certificate.pem which download fromhttps://identity.apple.com/pushcert
    4. ssl certificate
    which one should i use?

  • How can I add the "Profile Removal Password Payload"  to a configuration Profile?

    How can I add the “Profile Removal Password Payload”  to a configuration Profile?
    I’m not seeing an option to add this option when I edit the configuration profile within Apple Configurator.
    Do I have to edit the configuration profile(xml file) within a text editor?
    FYI:
    https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProf ileRef/Introduction/Introduction.html
    Profile Removal Password Payload
    The Removal Password payload is designated by specifying com.apple.profileRemovalPassword value as the PayloadType value.
    A password removal policy payload provides a password to allow users to remove a locked configuration profile from the device. If this payload is present and has a password value set, the device asks for the password when the user taps a profile's Remove button. This payload is encrypted with the rest of the profile.
    Key
    Type
    Value
    RemovalPassword
    String
    Optional. Specifies the removal password for the profile.

    You have found where it is stored in Thunderbird?
    Delete it. When Thunderbird needs it again, it will ask you for it.

  • Cannot set Proxy Auto Config in iPhone/iPad Configuration Profile

    Hi, All.
    Our enterprise uses internal and external DNS, and we leverage Proxy Auto Config (PAC) files to determine how to resolve hostnames.
    I can create a VPN Configuration Profile with the URL for the PAC file, so that when the VPN is enabled, it will start using the PAC file to resolve.
    However, there is no such option in the WiFi Configuration Profile.
    Any idea if there is a way to automate this, or if Apple intends to include this in a future version of iOS or iPCU?
    Thanks,
    David

    Ooops. Sorry, I meant "10/8", not "10/24" IP range.

  • Does apple allows to install multiple wifi configuration profile installation in a single device ?

    Let know that whether there is an option to install Wi-Fi configuration profiles containing configuration for different SSID's in a single device so that I need not to install a new FileName.mobileconfig file via iPhone Configuration Utility everytime for different SSID's.

    My question is does the reduction of throughput of Wifi occurs from the Extended Wi-Fi base station only, or it affects the primary base station as well?
    The bandwidth loss would be for the "entire" extended wireless network, not just from the extending base station. To improve the overall bandwidth of the extended network, placement of each base station is an important factor.
    I'm wondering would the thorughput be the same if I connect wired or the connection will be worse than 1.5MB/s thereabouts if I bridge wirelessly.
    Bandwidth performance-wise, going from best-to-worst: 1) wired-to-wired, 2) wired-to-wireless, 3) wireless-to-wireless (extended network,) & finally 4) wireless-to-wired (aka, wireless Ethernet bridge).

  • HT5439 Why does support *** u me this statement gets the problem solved ? Use Apple Configurator* to deploy a configuration profile with a Wi-Fi payload that contains the proxy configuration.

    Why does apple support help *** u me this opening statement help anyone without the knowledge to undertand what to do?
    Use Apple Configurator* to deploy a configuration profile with a Wi-Fi payload that contains the proxy configuration.

    Post in your native language, nothing posted so far makes any logical sense.

  • Cannot install configuration profiles using iphone configuration utility, why?

    I have several working configuration profiles, which I can distribute both via email and a website.
    I'd like to install the profiles through the iPhone Configuration Utility, but I am not able to do so. The devices show up just fine in the list. When I choose the Configuration Profile tab and clicking the install-button on a profile (which will install fine via Email or website) in the list, nothing happens. Regardless of the device beeing out of the box, or activated via iTunes. What am I missing?
    I have tried this on several iPad and iPad 2 devices with the latest (4.3.3) firmware installed.

    Hi,
    I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
    Profile installation failed
    The profile could not be added to device
    Any suggestions?
    I even erase all content and setting but that didn't help either.
    The only alarming thing is that in my Certificate section I have red message:
    "This certificate was signed by and untrusted issuer"
    Can that effect installation?
    If that is the case how to fixed it?
    P.S. iPad was purchased from Apple Store.
    Regards,

  • Cannot install APN configurations profile for H2O data network

    I am helping a friend of mine with his new unlocked iPhone he got from apple. It is not Jailbroken. In order to get to the data network, he has to install a profile to setup the APN configurations. The phone refuses to install because their can only be one APN configurations profile at a time. This issue should be solved by removing any old profiles that may cause the conflict. The problem is that there are no other profiles installed on the phone at all. In fact, I couldn't even make the profile option show up before installing another profile.
    I read in the internet that sometimes, if you update your phone the system may hide any old profiles it doesn't like. Is this true? If it is, is there away to remove the hidden profiles without doing a full reset to the device and wipe everything I have in there?
    iPhone 4 with iOS 4.3.2

    Hello,
    you don't need to sign the MDM profile with the APNS-certificate, and to my best knowledge you shouldn't even do it. The APNS-certificate is solely for the purpose of authenticate the MDM-commands your server sends to Apple's Push notification service.
    The installed MDM-profile on your device can be unsigned or signed with a SSL-webservercertificate from one of the trusted standard-CAs like Verisign or Thawte.
    You should make sure that your MDM-server either delivers it unsigned (which is failsafe and works) or upload a trusted SSL-certificate (together with the private key, usually in .PFX-format) for this task.
    One of the initial obstacle in Apple-MDM is to understand which classes of certificate are required and to understand their respective purpose.
    Best regards,
    Detlev

  • Can I install more than one configurator profile

    I want to develop 3 or maybe 4 layers of iPad iOS8 restrictions & Passcode rules.
    For example ALL iPads will have enforced Passcode rules, but only SOME iPads ill require content filtering & SOME require Control centre in lock mode.
    The actual working groups of iPads require a lot more complicated set of config elements - above is only an example.
    I'd like to create & install different profiles & INSTALL MORE THAN ONE PROFILE.
    I have tested this on a few iPads & it seems to work.
    My question is - Is this the recommended way / is there a problem if i install more that one profile ?
    Thanks in advance for any help.
    Kind Regards
    George kennedy.

    We install many configuration profiles on each of our devices. We only use one payload per configuration profile so that we can be very granular with our configurations. What I don't know is what would happen if you installed 2 configuration profiles with conflicting restrictions (i.e. one configuration profile allows Messages, and another does not allow Messages). We just make sure we install only one restrictions configuration profile, and then a bunch of other configuration profiles (mail and calendar settings, web clips, WiFi profiles, etc) on each device.
    Hope this helps!
    ~Joe

  • Can't install the configuration profile

    Hi, I have upgraded the ipad2 to iOS 5 and created a configuration profile, when I connect the iPad through USB, I can see the install button but when I click on it, nothing happens, it seems as if I missed something! Even when I try sending it as attachment through my email, it doesn't allow me to install it, it just gives me the option to copy.
    Is there any way to do it?
    Thanks

    Is it possible one of the payloads is incomplete?  I most often see an install failure when a mandatory entry in a payload is missing or has a bad value.....

  • Can't install configuration profile using iPhone Config Utility 3.5 and iPad iOS 5.1

    Sorry for the long title, but...
    I had a certificate expire in my configuration profile (that allows access to the Enterprise WiFi network). In the past, that means I go fetch a new certificate, install it into the configuration profile, attach the device to the computer via USB, and download that to the device. It's all good.
    With iCU 3.5 and iOS 5.1, that all works fine until the last step. I hit the install button - nothing happens. Zilch. Nada, Zero. I happen to be a developer as well, so I have Xcode open and am watching the device console. Absolutely nothing happens on the device console.
    What am I doing wrong? I can't believe that this is broken, and if it is broken I'm the first person to trip on it, so what's up?
    (I did workaround this problem by exporting and sharing the configuration via email to the device and installing it from the attachment. That part still seems to work, and the profile itself also seems to work. The problem seems to be with iCU and downloading profiles.)
    Thanks for your help.

    I ran into same problem. I think ithis might be your problem . This fixed mine I had settings already set and tried to install on new ipad and wouldn't work wouldn't do anything just set there I hit install and never did nothing. What I did was del the settings for configuration and re set them all over again and boom it's worked it works fine for me now. Hope this helps

  • Configuring the default configuration profile for Profile Manager

    Hello folks,
    I would like to edit the default configuration profile served by Profile Manger. As far as I understand the only thing I can configure from the Server.app is the name of the profile. The settings for the different services provided by the server (such Mail, Messages, etc.) are automatically chosen by Server.app. When logging as an administrator on the Profile Manager webapp, I can go to "Groups", choose "Everyone", go to "Settings" to review the different payloads. However, almost none of the settings are editable. You can read "This payload is configured using the Server app" on the top of the various panels.
    So my question is: How do you use Server to tweek those payloads? Can this be done using the serveradmin command line tool?
    Thank you very much for your help.
    Regards

    Bump. This is annoying the crap out of me. Every time I try to design a website using Coda, this color picker bug plagues me. I just wish I could turn off color profiles completely as I will never use them.

  • Installing Configuration Profile Fails

    A configuration profile is required to install security certificates to iPad.
    Created a configuration profile with iPhone Configuration Utility 2.2. Utility recognizes iPad, but clicking "Install" button on "Configuration Profiles" page does nothing (no error message, nothing). Sending the profile by Email to iPad gives "Mail Cannot Open This Attachment" error when opening configuration profile.
    I have previously created and installed profiles successfully to iPhones and the profile created above works in iPhone (3.1.3).

    Answering to my own question. I was able to create and install configuration profiles successfully by creating another user account in OS X and using that to install profiles.

  • How can I copy Apple Configurator profiles?

    I'm trying to maintain two different profiles with 60+ wireless access point "payloads" and I can't seem to load both of them at the same time because:
    "This Configuration Profile already exists. Do you want to replace it? Another version of this Configuration Profile ('<profilename>') already exists in the Library. Replacing it will overwrite its current contents."
    I've tried editing a copy with a different name and identifier, but that doesn't seem to work and I'm not going to re-enter 64 wi-fi ap passwords.

    Here are some replies I made to other users in the past that might help you. I hope these links lead to the correct posts.
    https://discussions.apple.com/message/11615443#11615443
    https://discussions.apple.com/message/9869476#9869476
    https://discussions.apple.com/message/5580927#5580927
    https://discussions.apple.com/message/10805500#10805500
    I could probably help you, too, but not in the near future. We're in the process of preparing to move & my older Apple products are packed away.

  • 0x87D11388 when deploying iOS Configuration Profile

    I am trying to deploy a Configuration Profile from the iPhone Configuration Utility, and then import it to Microsoft Intune.
    In Intune, i can see it fails with the error code 0x87D11388. But I can not find anything on this.
    My Configuration Profile only contains WiFi-settings:
    Thanks
    Mr. Thomas

    Hi,
    I haven't tried that actually but the error translates to:
    "iOS device is currently busy" which doesn't help much either, does it work with other profiles or is it just this one?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

Maybe you are looking for

  • Deployement order of MDBs and SSBs

    Hi All, Facing the issue with deployment order of EJBs in one ear, MDBs start reading and processing message before SSBs are initialised in JNDI while server startup. And JNDI lookup for SSB from MDB failes JNDI lookup exception gets raised, failing

  • 24" iMac - external display limitations

    1. I have a mid-2007 24" iMac. I believe this means it has a ATI Radeon HD 2600 PRO with 256MB of GDDR3 memory. The ATI specs suggest that this might be capable of driving a separate external display of 1920x1200 or maybe up to 2640x1600. I'm conside

  • Latest GR date to be automated

    Hi Experts, Pls note, my client uses Latest GR date slot in the PO (delivery tab) for almost all POs. Now to speed up the process they want the slot to be in display mode and it should add ten days (example) to del. date & reflect a latest date. For

  • So am I right in thinking iDVD '08 doesn't import MPEG2?

    Bit of a story... Basically recorded some footage of my girlfriend doing a small gig at her old school. It was recorded on a Sony Hi-Def camera. Unfortunatly, I cannot edit it on my iBook G4 800mhz because it is simply too old to use iMovie 08. But i

  • App-V depreciate product for future used

    Hi, A Microsoft consultant yesterday is came to our office. We were planning to deploy a RDS form for RemoteApps, but to push the apps the RDS servers with App-V 5.0 sp2. The Microsoft Consultant had announced that App-V was at Microsoft now a deprec